CompTIA 220-801 Online Practice Questions and Exam Preparation

CompTIA 220-801 Online Questions & Answers

• Question 111:

  Which of the following display connections has 15-pins?

  A. RGB
  B. VGA
  C. DVI
  D. HDMI
  B. VGA

  ---

  Reference. http://pinouts.ru/Video/VGA15_pinout.shtml

• Question 112:

  The helpdesk technician has been tasked to reinstall the OS on a desktop and has already inserted the OS install disk in the CD-ROM. Which of the following would MOST likely need to be configured within the BIOS to continue reinstalling the OS?

  A. BIOS password
  B. Flash BIOS for firmware upgrade
  C. Boot sequence
  D. Clock speeds
  C. Boot sequence

  ---

  To boot the OS from the CD ROM, you need to change the boot sequence to boot from CD ROM first. Normally, the boot sequence is to boot from hard disk and if it is unable to find boot files there, it will look for it in a CD ROM. After that, it will look into other places like a floppy disk drive and PXE boot.

• Question 113:

  A user, Ann, states that her laser printer has a smudge that repeats itself every couple inches down the center of each page. Which of the following components MOST likely needs replacing?

  A. Rollers
  B. Fuser
  C. Toner drum
  D. Pickup assembly
  C. Toner drum

• Question 114:

  A technician has replaced a riser inside a server and the riser is failing again after reboot. Which of the following should have been used when initially replacing the riser?

  A. Compressed air
  B. Vacuum cleaner
  C. Proper cable management
  D. ESD mat
  D. ESD mat

  ---

  Reference. http://en.wikipedia.org/wiki/Antistatic_mat

• Question 115:

  A technician is installing a new Windows network printer. Upon completion, the network settings are printed and stored under the printer. How can the technician make sure the printer retains the same network settings permanently? (Select TWO).

  A. Configure a DHCP scope for the subnet that the printer is on.
  B. Set the printer to use static information.
  C. Update the printer in the WINS database.
  D. Ask an administrator to create a new DNS name record for the printer.
  E. Ask an administrator to create a DHCP reservation for the printer.
  F. Configure the printer to use a DHCP relay.
  B. Set the printer to use static information.
  E. Ask an administrator to create a DHCP reservation for the printer.

• Question 116:

  A common method of accessing computers remotely that uses port 23 is known as?

  A. LDAP
  B. RDP
  C. Telnet
  D. FTP
  C. Telnet

  ---

  Reference. http://www.speedguide.net/port.php?port=23

• Question 117:

  A technician notices an impact printer has run out of ink. Which of the following should the technician do NEXT?

  A. Power cycle the printer
  B. Replace the ribbon
  C. Rewind the ribbon
  D. Replace the print head
  B. Replace the ribbon

  ---

  Reference. http://www.wieshs.eu.dodea.edu/Courses/PTS/Electronics/ComputerServiceSupport/css/Forms/Doc/I mpactGD.pdf

• Question 118:

  Which of the following ports is used by default for IMAP traffic?

  A. 53
  B. 110
  C. 143
  D. 443
  C. 143

• Question 119:

  A technician is asked to verify that a CAT5 patch cord, created by another technician, is in working order. Which of the following tools should the technician use to verify the patch cord?

  A. Multimeter
  B. Toner probe
  C. Loopback plug
  D. Cable tester
  D. Cable tester

• Question 120:

  Which of the following protocols would be used for file sharing between MAC OS and Windows OS workstations on a LAN?

  A. IMAP
  B. SMB
  C. SSH
  D. RDP
  B. SMB