Cisco 210-065 Online Practice Questions and Exam Preparation

Cisco 210-065 Online Questions & Answers

• Question 241:

  Which two of these can cause registration problems for a Cisco TelePresence Codec C40 endpoint running in H.323 mode? (Choose two.)

  A. The IP default gateway address is incorrect for the endpoint.
  B. The H.323 license stack is not added to the endpoint.
  C. The MAC address for the endpoint has not been added to the Cisco TelePresence VCS.
  D. The E.164 H323Alias has not been configured on the endpoint.
  E. The URI address has not been configured on the endpoint.
  A. The IP default gateway address is incorrect for the endpoint.
  D. The E.164 H323Alias has not been configured on the endpoint.

• Question 242:

  An engineer is deploying a Cisco TelePresence Content Server. Which two services are provided by this product? (Choose two.)

  A. video storage
  B. multiconferencing
  C. scheduler
  D. video conferencing
  E. video recording
  F. video overlay
  A. video storage
  E. video recording

• Question 243:

  A voice engineer is setting up a Cisco 4431 Integrated Services Router with Cisco Unified Communications Manager Express. To enable voice features for SIP endpoints, which command must the engineer enter?

  A. voice service voip
  B. ip voice
  C. telephony-service
  D. voice vlan
  C. telephony-service

• Question 244:

  Which scheduling and management application can be installed on any hardware platform that meets the minimum specifications that the end customer decides to deploy?

  A. Cisco Video Communications
  B. Cisco TelePresence Management Suite
  C. Cisco Digital Media Manager
  D. Cisco TelePresence Management Switch
  E. Cisco Unified Communications Manager
  B. Cisco TelePresence Management Suite

• Question 245:

  Endpoint for immersive telepresence:

  A. EX 90
  B. TX 9000
  C. SX 10
  D. DX 70
  B. TX 9000

• Question 246:

  Which of these needs to be enabled in Cisco Unified Communications Manager in order for the Cisco TelePresence System 500-32 to be able to share a presentation with a Cisco TelePresence System Codec C40 endpoint that is registered to a VCS?

  A. Allow iX application media
  B. Send send-receive SDP in mid-call invite
  C. Allow presentation sharing using BFCP
  D. Allow presentation sharing using H.235
  E. Deliver conference bridge identifier
  C. Allow presentation sharing using BFCP

• Question 247:

  A customer reports that in a CTS1300 room, a microphone switches to a segment that has no one talking. Which step is first in the troubleshooting process?

  A. Replace the microphones to stop phantom switching.
  B. Reseat the microphone cables.
  C. Recalibrate the microphones.
  D. Reboot the codec.
  E. Replace the audio expansion box because the microphones connect to an AV expansion box.
  C. Recalibrate the microphones.

• Question 248:

  Which statement is correct regarding the difference between Multisite and Multiway conferencing?

  A. Multisite requires configuration on the endpoint, whereas Multiway requires the Multiway options key to be installed.
  B. Multisite requires the presence of a multipoint control unit, whereas Multiway relies on the endpoint conferencing capability.
  C. Multisite is used to conference in multiple sites, whereas Multiway is intrasite multipoint conferencing.
  D. Multisite requires the Multisite options key to be installed and configured at the endpoint, whereas Multiway requires a Cisco TelePresence Video Communications Server and a centralized multipoint control unit.
  D. Multisite requires the Multisite options key to be installed and configured at the endpoint, whereas Multiway requires a Cisco TelePresence Video Communications Server and a centralized multipoint control unit.

• Question 249:

  Which type of lighting is recommended for Cisco TelePresence immersive solutions?

  A. point
  B. reflective
  C. direct
  D. indirect
  A. point

• Question 250:

  An engineer needs to connect an external display to a Cisco TelePresence MX700 endpoint. What must the engineer do to access the external monitor output connector?

  A. Remove the cover under the main monitor. The cover is fastened with two screws.
  B. Remove the cover on the back of the system. The cover is fastened with magnets.
  C. Remove the cover on the right side of the system. The cover is fastened with four screws.
  D. Remove the cover on the left side of the system. The cover is fastened with magnets.
  D. Remove the cover on the left side of the system. The cover is fastened with magnets.