Cisco 210-065 Online Practice Questions and Exam Preparation

Cisco 210-065 Online Questions & Answers

• Question 211:

  An engineer is configuring VIP mode for a Cisco TelePresence Multipoint Switch. What are three characteristics the engineer must keep in mind? (Choose three.)

  A. VIP mode can be configured only when the meeting is not active.
  B. The VIP is displayed on the center screen for three screen systems.
  C. Network multipoint meetings are supported.
  D. VIP mode timers must be configured from the CLI.
  E. Locking is not supported.
  F. Only one VIP can be configured for each meeting.
  B. The VIP is displayed on the center screen for three screen systems.
  D. VIP mode timers must be configured from the CLI.
  F. Only one VIP can be configured for each meeting.

• Question 212:

  A technician is tasked with performing a room readiness assessment in preparation for an immersive video endpoint. What are three Cisco best practices regarding lighting recommendations for the room? (Choose three.)

  A. The bulb temperature should be between 4000 and 4100K.
  B. Key lighting should be between 200 and 400 Lux with the endpoint powered on.
  C. Shoulder lighting should not exceed two times the facial lighting values with the endpoint off.
  D. Use direct lighting fixtures.
  E. Within the camera field of view, the lighting for all parts of the room should not fluctuate more than 100 Lux.
  F. Avoid using dimming light control systems.
  A. The bulb temperature should be between 4000 and 4100K.
  C. Shoulder lighting should not exceed two times the facial lighting values with the endpoint off.
  E. Within the camera field of view, the lighting for all parts of the room should not fluctuate more than 100 Lux.

• Question 213:

  Which feature does Cisco VCS use to escalate a point-to-point video call to a video conference?

  A. universal port
  B. multisite
  C. multipoint
  D. multiway
  D. multiway

• Question 214:

  When outside of the network, Cisco Jabber uses which of the following DNS SRV records to complete service discovery and reach domain.com?

  A. _cuplogin._tcp.domain.com DNS SRV record
  B. _xmpp-server._tcp.domain.com DNS SRV record
  C. _cisco-uds._tcp.domain.com DNS SRV record
  D. _collab-edge._tls.domain.com DNS SRV record
  D. _collab-edge._tls.domain.com DNS SRV record

• Question 215:

  The command xCommand Security FIPSMode Activate is issued to a Cisco TelePresence C-Series codec. Management wants to reverse the effects of this command. Which two methods could be used for this purpose? (Choose two.)

  A. From the touch screen, disable FIPS mode in the Administrator Settings menu.
  B. From the touch screen, perform a factory reset from the Administrator Settings menu.
  C. From the touch screen, disable all security settings from the Administrator Settings menu.
  D. Use SSH to connect to the system and enter the xCommand Security FIPSMode Deactivate command.
  E. Use Telnet to connect to the system and enter the xCommand SystemUnit FactoryReset Init command.
  F. Use SSH to connect to the system and enter the xCommand SystemUnit FactoryReset Confirm: Yes command.
  B. From the touch screen, perform a factory reset from the Administrator Settings menu.
  F. Use SSH to connect to the system and enter the xCommand SystemUnit FactoryReset Confirm: Yes command.

• Question 216:

  Refer to the exhibit.

  

  Management would like to find out when a particular multipoint control unit feature was enabled and who enabled it. Which menu option is the most appropriate when searching for that information?

  A. Event Display Filter
  B. Audit Log
  C. Event Log
  D. Syslog
  B. Audit Log

• Question 217:

  A network engineer wants to perform a factory reset on a Cisco Webex Room series device from the CLI. Which command should be used?

  A. xcommand systemunit FactoryReset Confirm: Yes
  B. xConfiguration FactoryReset
  C. xCommand FactoryReset
  D. xConfiguration SystemUnit FactoryReset
  A. xcommand systemunit FactoryReset Confirm: Yes

• Question 218:

  Which two features are provided by Cisco TelePresence Management Suite? (Choose two.)

  A. Scheduling of video conference calls
  B. Built-in-bridge functionality for multiparty video conferences
  C. Cisco TelePresence endpoint automated redundancy
  D. SIP-H.323 protocol interworking
  E. endpoint configuration backup and restore
  A. Scheduling of video conference calls
  E. endpoint configuration backup and restore

• Question 219:

  Conference solution for video streaming (Choose two)

  A. TCS
  B. VCS
  C. TMS
  D. TS
  E. MCU 4500
  A. TCS
  E. MCU 4500

• Question 220:

  Which CLI command can be used to reset the Cisco TelePresence System 500-32 personal video system to a factory condition?

  A. utils factory reset 2
  B. utils system factory init
  C. xcommand defaultvalues set level: 2
  D. xconfiguration default factory
  E. utils reset factory
  F. xcommand SystemUnit FactoryReset
  B. utils system factory init