Cisco 210-065 Online Practice Questions and Exam Preparation

Cisco 210-065 Online Questions & Answers

• Question 101:

  Which function does a Cisco TCS recording alias perform?

  A. It links recorded media to a specified output location.
  B. It provides a dialable alias that will trigger a TCS recording workflow.
  C. It sends media to Cisco Medianet.
  D. It provides an alias for the recorded filename.
  B. It provides a dialable alias that will trigger a TCS recording workflow.

• Question 102:

  Refer to the exhibit. When this alarm is seen, what is the maximum number of registrations that a Cisco VCS can support?

  

  A. 2500
  B. 50
  C. 3
  C. 3

• Question 103:

  A Cisco EX60 is connected to the network, but users cannot make calls and the device is unregistered. The voice engineer configured the device on Cisco Unified Communications Manager. Which two options are causes of this problem? (Choose two.)

  A. SIP URI is not configured correctly.
  B. H.323 parameters are not configured correctly.
  C. IP address is in a different subnet.
  D. No user is associated to a device.
  E. SIP proxy is not configured correctly.
  D. No user is associated to a device.
  E. SIP proxy is not configured correctly.

• Question 104:

  You have installed a C-Series endpoint in an office where DHCP is not supported. At a minimum, which four network items must be configured for the endpoint to be able to register with H.323 on a Cisco TelePresence Video Communication Server located at the external headquarters location? (Choose four.)

  A. unique IPv4 address
  B. subnet mask
  C. default gateway
  D. Cisco VCS IPv4 address
  E. Active Directory IPv4 address
  F. SMTP server IPv4 address
  A. unique IPv4 address
  B. subnet mask
  C. default gateway
  D. Cisco VCS IPv4 address

• Question 105:

  A network engineer wants to quickly view any issues that may exist for a newly deployed Cisco TelePresence SX20 codec. To which location in the codec web GUI should the engineer navigate to find this information?

  A. Diagnostics > Alerts
  B. Diagnostics > Troubleshooting
  C. Configuration > System Status
  D. Configuration > Security
  B. Diagnostics > Troubleshooting

• Question 106:

  A network engineer wants to check the local system call ID on a Cisco TelePresence Immersive System. Which CLI command should the engineer use?

  A. show call statistics addin
  B. show call statistics all
  C. show call statistics audio
  D. show call status
  E. show call statistics video
  D. show call status

• Question 107:

  Which Cisco feature upscales SD and low-bandwidth video participants up to four times, allows them to appear closer to HD in a video call, and is supported on Cisco MCU and Cisco TelePresence Server multiparty solutions?

  A. ClearPath
  B. ClearVision
  C. WebEx enabled TelePresence
  D. Active Presence
  E. Individual Transcoding
  B. ClearVision

• Question 108:

  Which two protocols can be used with the Cisco TelePresence Content Server to allow users to share content from their laptops? (Choose two.)

  A. BFCP
  B. H.239
  C. PCoIP
  D. Switched Presentation
  E. SCCP
  F. RDP
  A. BFCP
  B. H.239

• Question 109:

  What are the best practices for maintaining a high-quality video call regarding latency, jitter, and packet loss?

  A. 20-ms one-way delay, no jitter, no packet loss
  B. less than 150-ms one-way delay, 30-ms jitter, less than 3 percent packet loss
  C. 150- to 400-ms one-way delay, 50-ms jitter, 5 percent packet loss
  D. 500-ms one-way delay, 50-ms jitter, 5 percent packet loss
  B. less than 150-ms one-way delay, 30-ms jitter, less than 3 percent packet loss

• Question 110:

  Which two of these support an ad-hoc conference call? (Choose two.)

  A. Cisco TelePresence Multiway with Cisco TelePresence Multipoint Control Unit and Cisco TelePresence Video Communications Server
  B. using the Cisco TelePresence Management Suite Scheduler to schedule a conference call to start in 5 minutes
  C. using the Booking tab in the Cisco TelePresence Management Suite to configure a new conference
  D. using the tab Administrative Tools > Configuration > Conference Settings in the Cisco TelePresence Management Suite
  E. pressing the conference button on a Cisco Unified IP Phone 8941 to conference in a third call
  A. Cisco TelePresence Multiway with Cisco TelePresence Multipoint Control Unit and Cisco TelePresence Video Communications Server
  E. pressing the conference button on a Cisco Unified IP Phone 8941 to conference in a third call