A pool of four servers has been partially upgraded for two new servers with more memory and CPU capacity. The BIG-IP Administrator must change the load balance method to consider more connections for the two new servers. Which load balancing method considers pool member CPU and memory load?
A. Round Robin
B. Dynamic Ratio
C. Ratio
D. Least Connection
During a maintenance window, an EUD test was executed and the output displayed on the screen. The BIG-IP Administrator did NOT save the screen output. The BIG-IP device is currently handling business critical traffic. The BIG-IP Administrator needs to minimize impact. What should the BIG-IP Administrator do to provide the EUD results to F5 Support?
A. Boot the device into EUD then collect output from console
B. Execute EUD from tmsh and collect output from console
C. Collect file /var/log/messages
D. Collect file /shared/log/eud.log
A BIG-IP Administrator opens a case with F5 Support. The support engineer requests the BIG-IP appliance chassis serial number.
Which TMSH command will provide this information?
A. . list /sys software
B. show /sys version
C. list/sys diags
D. show /sys hardware
A custom HTTP monitor is failing to a pool member 10.10.3.75:8080 that serves up www.example.com.
A ping works to the pool member address.
The SEND string that the monitor is using is:
GET/HTTP/l.l/r/n/Host.www.example.com/r/n/Connection
Close/r/n/r/n
Which CLI tool syntax will show that the web server returns the correct HTTP response?
A. curlhttp://10.10.10.3.75:8080/www.example.com/index.html
B. curl-header 'Host:www.example.com' http://10.10.3.75:8080/
C. tracepath 'http://www.example.com:80
D. tracepath 10.10.3.75:8080 GET /index
A user wants to use the iHealth Upgrade Advisor to determine any issues with upgrading TMOS from 13.0 to 13.1. Where can the user generate the QKView to upload to iHealth?
A. System > Software Management
B. System > Archives
C. System > Configuration
D. System > Support
A configuration change is made on the standby member of a device group.
What is displayed as "Recommended Action" on the Device Management Overview screen?
A. Force active member of device group to standby
B. Activate device with the most recent configuration
C. Synchronize the active member configuration to the group.
D. Synchronize the standby member configuration to the group
Active connections to pool members are unevenly distributed. The load balancing method is Least Connections (member) Priority Group Activation is disabled. What is a potential cause of the event distribution?
A. Priority Group Activation is disabled
B. SSL Profile Server is applied
C. Persistence profile is applied
D. incorrect load balancing method
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults. If the origin server were to initiate traffic via the BIG-IP, what changes, if any, would take place when the BIG-IP processes such packets?
A. The BIG-IP would drop the request since the traffic didn't arrive destined to the NAT address.
B. The source address would not change, but the destination address would be changed to the NAT address.
C. The source address would be changed to the NAT address and destination address would be left unchanged.
D. The source address would not change, but the destination address would be changed to a self-IP of the BIG-IP.
Assume a virtual server is configured with a ClientSSL profile. What would the result be if the virtual server's destination port were not 443?
A. SSL termination could not be performed if the virtual server's port was not port 443.
B. Virtual servers with a ClientSSL profile are always configured with a destination port of 443.
C. As long as client traffic was directed to the alternate port, the virtual server would work as intended.
D. Since the virtual server is associated with a ClientSSL profile, it will always process traffic sent to port 443.
A BIG-IP Administrator needs to apply a license to the BIG-IP system to increase the user count from the base license.
Which steps should the BIG-IP Administrator?
A. System License > Re-activate> Add-On Registration> Edit
B. System > License > Re-activate > Base Registration> Edit
C. Device Management > Devices > Select BIG-IP System > Update
D. System > Configuration >Device > General
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only F5 exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 201 exam preparations and F5 certification application, do not hesitate to visit our Vcedump.com to find your solutions here.