Cisco 200-125 Online Practice Questions and Exam Preparation

Cisco 200-125 Online Questions & Answers

• Question 721:

  What SNMP message alerts the manager to a condition on the network?

  A. response
  B. get
  C. trap
  D. capture
  C. trap

  ---

  An agent can send unsolicited traps to the manager. Traps are messages alerting the SNMP manager to a condition on the network. Traps can mean improper user authentication, restarts, link status (up or down), MAC address tracking,

  closing of a TCP connection, loss of connection to a neighbor, or other significant events.

  Reference:

  http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12- 1_9_ea1/configuration/guide/scg/swsnmp.html

• Question 722:

  Refer to the exhibit.

  

  What set of commands was configured on interface Fa0/3 to produce the given output?

  A. interface FastEthernet 0/3 channel-group 1 mode desirable switchport trunk encapsulation dot1q switchport mode trunk
  B. interface FastEthernet 0/3 channel-group 2 mode passive switchport trunk encapsulation dot1q switchport mode trunk
  C. interface FastEthernet 0/3 channel-group 2 mode active switchport trunk encapsulation dot1q switchport mode trunk
  D. interface FastEthernet 0/3 channel-group 2 mode on switchport trunk encapsulation dot1q switchport mode trunk
  B. interface FastEthernet 0/3 channel-group 2 mode passive switchport trunk encapsulation dot1q switchport mode trunk

  ---

  Based on the output shown, the configured channel group number was 2 and the mode used was passive, so only choice B is correct.

• Question 723:

  

  Refer to the exhibit. A technician has configured the FastEthernet0/1 interface on Sw11 as an access link in VLAN 1. Based on the output from the show vlan brief command issued on Sw12, what will be the result of making this change on Sw11?

  A. Hosts will not be able to communicate between the two switches.
  B. The hosts in all VLANs on the two switches will be able to communicate with each other.
  C. Only the hosts in VLAN10 and VLAN 15 on the two switches will be able to communicate with each other.
  D. Only the hosts in VLAN 1 on the two switches will be able to communicate with each other.
  A. Hosts will not be able to communicate between the two switches.

• Question 724:

  Which two statements about the extended traceroute command are true? (Choose two.)

  A. It can be repeated automatically at a specified interval.
  B. It can validate the reply data.
  C. It can use a specified TTL value.
  D. It can send packets from a specified interface or IP address.
  E. It can use a specified ToS.
  C. It can use a specified TTL value.
  D. It can send packets from a specified interface or IP address.

• Question 725:

  Scenario:

  You work for a company that provides managed network services, and of your real estate clients running a small office is experiencing network issues, Troubleshoot the network issues.

  Router R1 connects the main office to internet, and routers R2 and R3 are internal routers

  NAT is enabled on Router R1.

  The routing protocol that is enable between routers R1, R2, and R3 is RIPv2.

  R1 sends default route into RIPv2 for internal routers to forward internet traffic to R1.

  Server1 and Server2 are placed in VLAN 100 and 200 respectively, and dare still running router on stick configuration with router R2.

  You have console access on R1, R2, R3, and L2SW1 devices. Use only show commands to troubleshoot the issues.

  

  

  

  

  

  

  

  

  

  

  

  Examine R2 configuration, the traffic that is destined to R3 LAN network sourced from Router R2 is forwarded to R1 instead R3. What could be an issue?

  

  A. RIPv2 routing updates are suppressed between R2 and R3 using passive interface feature.
  B. RIPv2 enabled on R3, but R3 LAN network that is not advertised into RIPv2 domain.
  C. No issue that is identified; this behavior is normal since default route propagated into RIPv2 domain by Router R1.
  D. RIPv2 not enabled on R3.
  D. RIPv2 not enabled on R3.

• Question 726:

  Which statement about MPLS is true?

  A. It operates in Layer 1.
  B. It operates between Layer 2 and Layer 3.
  C. It operates in Layer 3.
  D. it operates in Layer 2.
  B. It operates between Layer 2 and Layer 3.

  ---

  Explanation: MPLS belongs to the family of packet-switched networks. MPLS operates at a layer that is generally considered to lie between traditional definitions of OSI Layer 2 (data link layer) and Layer 3 (network layer), and thus is often referred to as a layer 2.5 protocol.

• Question 727:

  Drag and drop the networking features or functions from the left onto the planes on which they operate on the right .

  Select and Place:

  

  

• Question 728:

  Which value must you configure on a device before EIGRP for IPv6 can start running?

  A. public IP address
  B. loopback interface
  C. router ID
  D. process ID
  C. router ID

• Question 729:

  Which two statements about the ip subnet-zero command are true? (Choose two)

  A. It is enabled by default on Cisco routers
  B. It must be configured before you activate NAT on a router
  C. It specifies the broadcast IP addresses in the subnet
  D. It must be configured each time you reboot a router
  E. It enables the network to make full use of the available IP address space
  A. It is enabled by default on Cisco routers
  E. It enables the network to make full use of the available IP address space

• Question 730:

  Drag Drop

  Select and Place: