Cisco 200-125 Online Practice Questions and Exam Preparation

Cisco 200-125 Online Questions & Answers

• Question 321:

  When troubleshooting ethernet connectivity issues how can you verify that an ip address is known to a router?

  A. Check Whether the ip address is in the routing table
  B. Check Whether an ACL is blocking the ip address
  C. Check Whether the ip address is in the CAM Table
  D. Check Whether the ip address is in the ARP Table
  D. Check Whether the ip address is in the ARP Table

• Question 322:

  On which layer tcp/ip is ACL Apic-EM path

  A. Layer 1
  B. Layer 2
  C. Layer 3
  D. Layer 4
  D. Layer 4

• Question 323:

  

  Refer to the exhibit. Which option describes how SwitchA will handle the frame just received?

  A. It will flood the frame out of all the ports except Fa0/3.
  B. It will drop the frame.
  C. It will flood the frame out all ports.
  D. It will forward the frame out of portFa0/3 only.
  E. It will forward the frame out of port Fa0/6 only.
  E. It will forward the frame out of port Fa0/6 only.

• Question 324:

  Refer to the exhibit.

  

  What is the most appropriate summarization for these routes?

  A. 10.0.0.0 /21
  B. 10.0.0.0 /22
  C. 10.0.0.0 /23
  D. 10.0.0.0 /24
  B. 10.0.0.0 /22

  ---

  The 10.0.0.0/22 subnet mask will include the 10.0.0.0, 10.0.1.0, 10.0.2.0, and 10.0.3.0 networks, and only those four networks.

• Question 325:

  What is the purpose of Inverse ARP?

  A. to map a known IP address to a MAC address
  B. to map a known DLCI to a MAC address
  C. to map a known MAC address to an IP address
  D. to map a known DLCI to an IP address
  E. to map a known IP address to a SPID
  F. to map a known SPID to a MAC address
  D. to map a known DLCI to an IP address

  ---

  Dynamic address mapping relies on the Frame Relay Inverse Address Resolution Protocol (Inverse ARP), defined by RFC 1293, to resolve a next hop network protocol (IP) address to a local DLCI value. The Frame Relay router sends out Inverse ARP requests on its Frame Relay PVC to discover the protocol address of the remote device connected to the Frame Relay network. The responses to the Inverse ARP requests are used to populate an address-to-DLCI mapping table on the Frame Relay router or access server. The router builds and maintains this address-to-DLCI mapping table, which contains all resolved Inverse ARP requests, including both dynamic and static mapping entries.

• Question 326:

  Which two statements about stacking Cisco switches are true?(Choose two)

  A. It enables the administrator to manage multiple switches from a single management interface.
  B. The administrator can create only one stack of switches in a network which is under the same administrative domian.
  C. When a new master switch is elected,it queries the previous master for its running configuration.
  D. The administrator can add additional switches to the stack as demand increases.
  E. Each switch manages its own MAC address table.
  A. It enables the administrator to manage multiple switches from a single management interface.
  D. The administrator can add additional switches to the stack as demand increases.

• Question 327:

  Which technology you will choose to connect multiple sites with secure connections?

  A. Point-to-point
  B. DMVPN
  C. vpn
  D. https://www.CertBus.com/200-125.html
  B. DMVPN

• Question 328:

  Which two statements about RFC 1918 addresses are true? (Choose two.)

  A. They have reserved address space for Class A and Class B networks only.
  B. They increase network performance.
  C. They require Network Address Translation or Port Address Translation to access the Internet
  D. They must be registered.
  E. They provide security to end users when the users access the Internet
  C. They require Network Address Translation or Port Address Translation to access the Internet
  E. They provide security to end users when the users access the Internet

• Question 329:

  Which WAN topology provides a direct connection from each site to all other sites on the network?

  A. single-homed
  B. full mesh
  C. point-to-point
  D. hub-and-spoke
  B. full mesh

• Question 330:

  Which two QoS tools can you use to guarantee minimum bandwidth to certain traffic? (Choose two)

  A. WFQ
  B. RSVP
  C. LLC
  D. FIFO
  E. CBWFQ
  A. WFQ
  E. CBWFQ