Oracle 1Z0-879 Online Practice Questions and Exam Preparation

Oracle 1Z0-879 Online Questions & Answers

• Question 201:

  A new service named banner has been written that needs to be incorporated into SMF. The appropriate entries have been placed in the milestones where this service is stopped and started and the service scripts are in the correct locations. Which command will incorporate the banner service into SMF?

  A. svcadm add /var/svc/manifest/site/banner-smf-xml
  B. svccfg add /var/svc/manifest/site/banner-smf.xml
  C. svccfg import /var/svc/manifest/site/banner-smf.xml
  D. svcadm import /var/svc/manifest/site/banner-smf.xml
  C. svccfg import /var/svc/manifest/site/banner-smf.xml

• Question 202:

  The /export/home file system is running out of space on c0t0d0s7. You added a new disk to the system and it is named c1t1d0. You need to move the /export/home file system to slice 7 on the new disk. Which command is used to move the data from /export/home to the new disk after booting the server to the single-user milestone?

  A. mount /dev/dsk/c1t1d0s7 /mnt ; ufsdump 0ucf - \ /dev/rdsk/c0t0d0s7 | (cd /mnt; ufsrestore xf - )
  B. ufsdump 0ucf - /dev/rdsk/c0t0d0s7 | ufsrestore xf - \ /dev/rdsk/c1t1d0s7
  C. ufsdump 0ucf - /dev/rdsk/c0t0d0s7| ufsrestore xf - \ /dev/rdsk/c1t1d0s7
  D. mount /export/home; ufsdump 0ucf - /export/home | \ ufsrestore xf - /dev/dsk/c1t1d0s7
  A. mount /dev/dsk/c1t1d0s7 /mnt ; ufsdump 0ucf - \ /dev/rdsk/c0t0d0s7 | (cd /mnt; ufsrestore xf - )

• Question 203:

  A file system needs to be backed up without disrupting the service to the users. You decide to create a snapshot of the file system in question, so that the file system does not have to be unmounted. Which step should you take first before creating the snapshot?

  A. remove all old snapshots
  B. locate sufficient backing-store space
  C. insert an empty tape in the tape drive
  D. put the system in single-user mode
  B. locate sufficient backing-store space

• Question 204:

  The BIOS on your x86-based system has this Boot Device Priority settings:

  

  Without making any changes to the BIOS settings, which installation method must you use?

  A. Use the WAN boot installation.
  B. Use PXE with custom JumpStart.
  C. Boot off from a Solaris PXE diskette.
  D. Solaris cannot be installed on this hardware configuration.
  E. You must boot off from a Solaris 10 Device Configuration Assistant Diskette.
  B. Use PXE with custom JumpStart.

• Question 205:

  The /prod/inv file system needs to be unmounted so you can take it offline for maintenance. When you try and unmount it, you receive the following error message:

  umount: /prod/inv busy

  One or more users are still using it.

  Which command should you use to discover who is using the file system?

  A. who -q
  B. fuser -cu /prod/inv
  C. who /prod/inv
  D. fuser -ck /prod/inv
  B. fuser -cu /prod/inv

• Question 206:

  Which Solaris tools allow a system administrator to remotely manage Solaris 10 OS updates for a number of remote systems from a centralized server location? (Choose two)

  A. /usr/sbin/smpatch
  B. /usr/bin/updatemanager
  C. /usr/sbin/patchadd
  D. /usr/sbin/patchmgr
  A. /usr/sbin/smpatch
  B. /usr/bin/updatemanager

• Question 207:

  A system administrator found the following message in the /var/adm/messages file:

  Jan 26 14:44:29 host genunix: [ID 936769 kern.notice] pm0 is /pseudo/pm@0

  Which statement is true?

  A. The message was logged by the kernel.
  B. The message was created by the logger command:logger -t genunix -p kern.notice "pm0 is /pseudo/ pm@0".
  C. The message was created by the logger command:logger "genunix: [ID 936769 kern.notice] pm0 is / pseudo/pm@0".
  D. The message was created by the logger command:logger -t genunix -p kern.notice "[ID 936769 kern.notice] pm0 is /pseudo/pm@0".
  A. The message was logged by the kernel.

• Question 208:

  On x86-based systems, for which two locations can the ability to utilize PXE network boot be enabled? (Choose two.)

  A. DVD
  B. boot diskette
  C. system BIOS
  D. network adapter configuration tool
  C. system BIOS
  D. network adapter configuration tool

• Question 209:

  Exhibit:

  install_type initial_install system_type standalone partitioning explicit usedisk c0t0d0 filesys c0t0d0s1 1024 swap filesys c0t0d0s0 free / cluster SUNWCall What type of JumpStart configuration file is shown in the exhibit?

  A. profile file
  B. rules file
  C. finish script
  D. sysidcfg file
  E. bootparams file
  A. profile file

• Question 210:

  The exhibit lists the boot process phases.

  

  Two of the phases are significantly different between the SPARC boot and a x86/x64 boot processes. The other three phases are generally the same and use a similar set of files. Select the list of phases that are similar for both SPARC and x86/x64 boot.

  A. The boot PROM phase, the kernel phase, the init phase
  B. The boot program phase, the init phase, the svc.startd phase
  C. The kernel phase, the svc.startd phase, the init phase
  D. The boot program phase, the kernel phase, the svc.startd phase
  C. The kernel phase, the svc.startd phase, the init phase