Oracle 1Z0-877 Online Practice Questions and Exam Preparation

Oracle 1Z0-877 Online Questions & Answers

• Question 211:

  You want to set a system's default destination printer, so you run the command:

  # lpadmin -d printerE

  What file stores this information?

  A. /etc/default/printers.conf
  B. /var/sadm/printers
  C. /etc/default/printerE
  D. /etc/printers.conf
  D. /etc/printers.conf

• Question 212:

  The print server on the network has one print spooler defined, called printer1. You have a requirement to modify the shell script that actually sends the jobs associated with printer1 to the printer. Which file should you modify?

  A. /etc/printers.conf
  B. /var/spool/lp/requests/printer1
  C. /etc/lp/interfaces/printer1
  D. /usr/lib/lp/postscript/postprint
  C. /etc/lp/interfaces/printer1

• Question 213:

  There is a project that requires a large number of systems to be re-installed on the network. Each installation needs to be hands off and tailored to the task for which the system is intended. Which installation method allows for the specific tailoring of these installs?

  A. Solaris Live Upgrade software
  B. Solaris OS installed from a tape device
  C. an install from a single Solaris Flash archive
  D. Custom JumpStart Installation
  D. Custom JumpStart Installation

• Question 214:

  When your Solaris system is booted, a startup script initializes the rpcbind service. Which script is it?

  A. /lib/svc/method/net-physical
  B. /etc/rcS.d/S30network
  C. svc:/network/rpc/bind:default
  D. /lib/svc/method/rpc-bind
  D. /lib/svc/method/rpc-bind

• Question 215:

  A SPARC-based system, but you are not sure of the physical path information. Which OBP command shows you this information?

  A. probe-all
  B. prtdiag -v
  C. show-devs
  D. printenv
  E. probe-scsi-all
  C. show-devs

• Question 216:

  The automatic nightly backup of the /export3 file system failed because of a lack of space on the tape. You need to put in a fresh tape and manually restart the backup. To do this, you need to know which disk device holds the /export3 file system. Which two commands provide this information? (Choose two.)

  A. /usr/bin/ls
  B. /usr/bin/du
  C. /usr/sbin/df
  D. /usr/sbin/disks
  E. /usr/sbin/mount
  C. /usr/sbin/df
  E. /usr/sbin/mount

• Question 217:

  A review of system security dictates that root logins are to be completely disabled.

  In the file that contains the entry that controls root logins, to what must you set the line beginning CONSOLE= for root logins to be disabled?

  A. CONSOLE=/dev/ttya
  B. CONSOLE=
  C. CONSOLE=/dev/pts/1
  D. CONSOLE=/dev/console
  B. CONSOLE=

• Question 218:

  You have just configured the network interface on systemA . The following information is displayed pertaining to the network interface on systemA:

  

  From systemB, you test the network connectivity by sending ICMP ECHO_REQUEST packets to systemA.

  The following message is displayed:

  no answer from systemA

  What is most likely the problem?

  A. The interface is not plumbed.
  B. The interface is not configured.
  C. The interface does not have valid routes configured.
  D. The interface is not marked as
  D. The interface is not marked as

• Question 219:

  You are the system administrator and the IT manager asks you to attach a new boot disk to a SPARC- based development system. This allows the server to have both a Solaris 9 OS system disk and a Solaris 10 OS system disk. You bring the system to run level 0 and attach a single external SCSI disk to the workstation. After power cycling the workstation to the ok prompt, the new disk is presented as /pci@1f, 0/ pci@1/pci@1/SUNW, isptwo@4/sd2, 0. Which FORTH Monitor command creates a new permanent device alias called S10disk?

  A. nvalias /pci@1f, 0/pci@1/pci@1/SUNW, isptwo@4/sd@2, 0 S10disk
  B. nvalias S10disk /pci@1f, 0/pci@1/pci@1/SUNW, isptwo@4/sd@2, 0
  C. devalias /pci@1f, 0/pci@1/pci@1/SUNW, isptwo@4/sd@2, 0 S10disk
  D. devalias S10disk /pci@1f, 0/pci@1/pci@1/SUNW, isptwo@4/sd@2, 0
  B. nvalias S10disk /pci@1f, 0/pci@1/pci@1/SUNW, isptwo@4/sd@2, 0

• Question 220:

  The following command is issued on your Solaris system:

  zpool create datapool mirror c1t1d0 c2t1d0 mirror c3t1d0 c4t1d0 Which answer describes the type of device that has just been created? (Choose two)

  A. Mirrored ZFS file system
  B. RAID-Z storage pool
  C. A ZFS storage pool
  D. A mirrored ZFS storage pool
  A. Mirrored ZFS file system
  D. A mirrored ZFS storage pool