Oracle 1Z0-822 Online Practice Questions and Exam Preparation

Oracle 1Z0-822 Online Questions & Answers

• Question 41:

  You are configuring a system on your network that was installed using LiveCD. You configured applied a static IP address to the system. You now need to configure a default router. Assume that name services are file based and the router's IP address is 172.31.10.1. Which two methods should you use to configure a default route on this Oracle Solaris 11 system?

  A. svccfg s network/physical setprop config/defroute=172.31.10.1;svcadm refresh network/physical; svcadm restart network/physical
  B. svccfg s routing/route setprop config/defroute=172.31.10.1;svcadm refresh routing/route; svcadm restart routing/route
  C. Add the IP address to the /etc/defaultrouter file and run route add default 172.31.10.1.
  D. netadm modify p ncp DefaultFixed set-prop p defroute=172.31.10.1
  E. ipadm set-prop p defaultrouter=172.31.10.1
  B. svccfg s routing/route setprop config/defroute=172.31.10.1;svcadm refresh routing/route; svcadm restart routing/route

• Question 42:

  Consider the following command: dispadmin -c IA -g -r 1000000

  Which statement correctly describes the result?

  A. The quantum will be reported in milliseconds.
  B. The quantum will be output every 1000000 milliseconds.
  C. The quantum will be reported in microseconds.
  D. The quantum will be output every 1000000 microseconds.
  A. The quantum will be reported in milliseconds.

• Question 43:

  What is the signature-policy attribute's default value for the pkg client?

  A. None
  B. Verify
  C. Require
  D. require-names
  B. Verify

• Question 44:

  You administer an Oracle Solaris 11 server with multiple zones. You want to configure it so that all nonprivileged users in the global zone see only their own process. What must you do to make the change?

  A. Modify the LIMITPRIV variable in the /etc/usr/user_attr file.
  B. Modify the basic privilege ser in the /etc/security/policy.conf file.
  C. Configure the priv= attribute in the /etc/security/prof_attr.d/core-os file.
  D. Configure privileges for the ps command in the /etc/security/exec_attrd/core-os file.
  D. Configure privileges for the ps command in the /etc/security/exec_attrd/core-os file.

• Question 45:

  Within the file /etc/security/exec_attr.d/core-os, the following line is found:

  Network Management:solaris:cmd:RO::/usr/sbin/dladm:euid=dladm;egid=netadm;\privs=sys_dl_config,n et_rawaccess,proc_audit

  To assume which of the following can a user using the su command execute dladm with full privileges?

  A. the net_rawacess role
  B. the sys_dl_config profile
  C. the Network Management role
  D. a role that includes the sys_dl_config profile
  E. a role that includes the Network Management profile
  C. the Network Management role

• Question 46:

  Which two statements correct regarding Link Aggregations?

  A. The MAC address of the first configured link is used for all links.
  B. A link with an existing IP interface cannot be added to an aggregation.
  C. The switch must support the Link Aggregation Control Protocol (LACP).
  D. Links of differing bit rates can be aggregated, but performance gains may not be realized.
  E. The f option of dladm allows aggregating devices that do not support link state notification.
  B. A link with an existing IP interface cannot be added to an aggregation.
  E. The f option of dladm allows aggregating devices that do not support link state notification.

• Question 47:

  The http://pkg.oracle.com/solaris/release publisher is available on this server. A new repository has been created in the /export/sllReaseRepo file system and you want to add the gzip package to this repository. Which is a valid method for adding the gzip package to the /export/sllReleaseRepo repository?

  A. pkgrecv s http://pkg.oracle.com/solaris/release d /export/sllReleaseRepo gzip
  B. pkgrecv s /export/sllReleaseRepo d http://pkg.oracle.com/solaris/release gzip
  C. pkgrecv s pkgrecv d /export/sllReleaseRepo gzip
  D. rsync aP http://pkg.oracle.com/solaris/release d /export/sllReleaseRepo gzip
  A. pkgrecv s http://pkg.oracle.com/solaris/release d /export/sllReleaseRepo gzip

• Question 48:

  You detected a failure of net0 in the IPMP group named ips1. The server hosting the failed NIC supports dynamic reconfiguration. Which statement is true regarding the replacement of the hardware interface?

  A. The NIC must be replaced with an identical physical interface card type.
  B. The NIC will be configured after replacement with the dladm command.
  C. The devfsadm command will be used to discover the replacement NIC.
  D. The replacement NIC must occupy the same bus slot as the original NIC .
  B. The NIC will be configured after replacement with the dladm command.

• Question 49:

  Which option describes how to revert a service back to a previous version?

  A. Issue the svccfg delcust command.
  B. Issue the revetsnap command.
  C. Issue the restore_repository command.
  D. Issue the svccfg revert command.
  A. Issue the svccfg delcust command.

• Question 50:

  You are mentoring a colleague who recently added a local7.notice entry to the /etc/syslog.conf file. After restarting the logging service, your colleague notices that no new records are being logged and asks for your help. Included in the file

  are these entries:

  ...

  (19)*.alert root

  (20)*.emerg *

  (21)local7.notice /var/log/Appx.log

  ...

  While running the syslogd process in debug mode, you notice the following:

  

  You examine the /var/adm/messages file:

  Jan 6 00:23:10 so111-server syslogd: line 21: unknown priority name "notice "

  What do you identify as the cause of the problem?

  A. There is a control or nonprintable character at the end of line 21 in the /etc/syslog.conf file.
  B. The application that logs to /var/log/Appx.log does not support the notice priority.
  C. There is an extra space in line 21 in the /etc/syslog.comf file.
  D. The facility local7 does not support the notice priority.
  D. The facility local7 does not support the notice priority.