Oracle 1Z0-1075-22 Online Practice Questions and Exam Preparation

Oracle 1Z0-1075-22 Online Questions & Answers

• Question 1:

  Your customer has the following business requirement. There are two work definitions created in the application. One Work Definition for Engine Finished Good and other Work Definition for Pallet Finished Good. The Engine Finished Good

  item should have Pallet Finished Goods as one of its component.

  Identify the way to establish the relationship between Pallet and Engine Work Definitions.

  A. Create a Subinventory that could be the completion Subinventory for yielding the pallet and then the same Subinventory can serve as the supply Subinventory of the pallet in the Work Definition created for Engine.
  B. Assign a higher priority to the Work Definition created for Engine and a lower one for the Work Definition for Pallet.
  C. The two Work Definitions can be tied through Project or Seiban numbers.
  D. The Work Definition versions can be used to tie the Work Orders.
  D. The Work Definition versions can be used to tie the Work Orders.

• Question 2:

  You are reviewing the production status of your manufacturing plant shop floor as a production supervisor. Your production manager wants a report on a work order status which is reserved against a particular customer. The final assembly of the work order is serialized. Which option shows the steps to complete the task using the mobile application?

  A. Use your mobile camera to scan the bar coded serial number of the final assembly> Upload the barcode to open the work order details page > Click Actions and select the E-mail icon> Select required work orders> Select the e-mail client, enter the recipient's e-mail, and click Send.
  B. Select the infotile Customer to open the work order details page> Click Actions and select the E- mail icon> Select required work orders>Select the e-mail client, enter the recipient's e-mail, and click Send.
  C. Use your mobile camera to scan the bar coded serial number of the final assembly> Upload the barcode to open the work order details page> Select required work orders> Click Social icon (OSN) > Select recipient, and click Share.
  D. Search the work order by customer name to open the work order details page> Click Actions and select the E-mail icon> Select required work orders> Select the e-mail client, enter the recipient's e- mail, and click Send.
  A. Use your mobile camera to scan the bar coded serial number of the final assembly> Upload the barcode to open the work order details page > Click Actions and select the E-mail icon> Select required work orders> Select the e-mail client, enter the recipient's e-mail, and click Send.

  ---

  Explanation/Reference:

• Question 3:

  Identify three requirements fulfilled by nonstandard work orders.

  A. Rescheduling
  B. Repair
  C. Rework
  D. Prototype
  B. Repair
  C. Rework
  D. Prototype

• Question 4:

  A Production Operator needs to load Work Order Transactions from an external system into Manufacturing Cloud. Identify the correct sequence of tasks to be performed.

  A. Load Data to Fusion repository> Export File to UCM server > Process Import Operations Transactions> Load file from UCM to Interface table.
  B. Export File to UCM server> Load Data to Fusion repository> Process Import Operations Transactions> Load file from UCM to Interface table.
  C. Load Data to Fusion repository> Export File to UCM server > Load file from UCM to Interface table >Process Import Operations Transactions.
  D. Load Data to Fusion repository> Load File from UCM to Interface table> Export File to UCM server> Process Import Operations Transactions.
  B. Export File to UCM server> Load Data to Fusion repository> Process Import Operations Transactions> Load file from UCM to Interface table.

• Question 5:

  The Manufacturing Engineer, responsible for creating and maintaining the Work Definitions, has scheduled the Process Item Structure Changes to Work Definitions program. However, after the execution of the program the engineer did not

  receive a notification with the details of the Item Structure changes.

  Which two reasons could cause this?

  A. The engineer does not have Data access to Items Attributes.
  B. The engineer does not have Data access to Items.
  C. The engineer does not have Data access to Manufacturing plant in which the Item Structure change was performed.
  D. The engineer does not have Data access to Item Structures.
  E. The engineer does not have the Manage Work Definitions function privilege.
  C. The engineer does not have Data access to Manufacturing plant in which the Item Structure change was performed.
  E. The engineer does not have the Manage Work Definitions function privilege.

• Question 6:

  A user wants to transfer the work order status updates and resource transaction data for costed resources to Cost Management. Which scheduled process should you run to achieve this requirement?

  A. Transfer Cost to Cost Management
  B. Transfer Transactions to Costing
  C. Transfer Ledger Balances
  D. Transfer General Ledger Balances to Balance Cubes
  A. Transfer Cost to Cost Management

• Question 7:

  The Plant Manager informs you that they have bought several machines for their manufacturing plant ABC. The plant has been set up with a separate cost element set ABC in Manufacturing Cloud. You are requested to configure these machines in such a way that those are costed to the work order for which operations are performed on these machines. Identify the correct setup that you will advise to the Plant Manager.

  A. Set up the machines as cost element type of "Resource" by selecting Cost Element set ABC.
  B. Set up the machines as cost element type of "Overhead" by selecting Cost Element set ABC.
  C. Set up the machines as cost element type of "Overhead" by selecting Cost Element set Common.
  D. Set up the machines as cost element type of "Resource" by selecting Cost Element set Common.
  D. Set up the machines as cost element type of "Resource" by selecting Cost Element set Common.

  ---

  Explanation/Reference:

• Question 8:

  To reduce the subassembly stock with no impact on material planning of child components of the subassemblies stock, you need to modify the multilevel item structure of a product. Identify the action that meets this requirement.

  A. Change the Supply Type = Push in Item definition and Work Definition, for subassemblies having high inventory stock.
  B. Change the Supply Type = Phantom in Item definition and Work Definition, for subassemblies having high inventory stock.
  C. Change the Supply Type = Assembly Pull in Item definition and Work Definition, for subassemblies having high inventory stock.
  D. Change the Supply Type = Operation Pull in Item definition and Work Definition, for subassemblies having high inventory stock.
  C. Change the Supply Type = Assembly Pull in Item definition and Work Definition, for subassemblies having high inventory stock.

  ---

  Explanation/Reference:

• Question 9:

  Planning Central has collected manufacturing data for a Work Order WO-2045 (Make Item AS1000), where actual duration of work order is 2 days. Item AS1000 manufacturing lead time is 1.25 days. A plan is run and the Work Order WO2045 is rescheduled. Identify the duration of the rescheduled Work Order WO- 2045.

  A. Rescheduled Work Order WO-2045 duration = 2 days
  B. Rescheduled Work Order WO-2045 duration = 1.25 days
  C. Rescheduled Work Order WO-2045 duration = 3.25days
  D. Rescheduled Work Order WO-2045 duration = 0.75 days
  D. Rescheduled Work Order WO-2045 duration = 0.75 days

• Question 10:

  Which two steps should you use to create a new Oracle Transactional Business Intelligence report in the Manufacturing Cloud?

  A. Use ibots to create the report.
  B. Use Business Intelligence answers to create the report.
  C. Use the Manufacturing subject area to select the report columns and create the report.
  D. Use Business Intelligence publisher to create a template and use that template to create the report.
  B. Use Business Intelligence answers to create the report.
  D. Use Business Intelligence publisher to create a template and use that template to create the report.

  ---

  Explanation/Reference:

  You can use Oracle Transactional Business Intelligence to create analysis and Oracle Business Intelligence Publisher to create reports.