Oracle 1Z0-1048 Online Practice Questions and Exam Preparation

Oracle 1Z0-1048 Online Questions & Answers

• Question 1:

  A customer defines work schedules by using both elapsed and time-based shifts. How should you configure the Time and Labor time entry layout so that it properly shows the scheduled absences on the time card?

  A. The time entry layout must include start and stop times along with the hidden Absence Plan time attribute and the displayed absence values.
  B. The time entry layout must be part of a layout set that is configured by using the Absence Management Time Consumer template.
  C. The time entry layout must include start and stop times along with the required assignment, in addition to a time card field for the absence values.
  D. Absence entries can be entered only by suing the Calendar Entry layout in the layout set.
  E. The time entry layout must contain the delivered, but hidden Schedule time attributes time card field.
  C. The time entry layout must include start and stop times along with the required assignment, in addition to a time card field for the absence values.

• Question 2:

  A rule used in the production environment is delivering incorrect results. It was determined that the formula and template were correct, but the rule input and output parameters were not set up with the correct values. Which option describes, at a high level, how should you resolve the issue?

  A. Set the WFM Administrator Profile Value: HWM_ALLOW_RULE_EDITS to "Yes". Delete the incorrect rule from the rule set. From the Manage Time Repository Rules task, select the incorrect rule and select Actions ?Edit Deployed Rule. Correct the input and output values. Re-add the corrected rule to the rule set using the appropriate edit options. Resubmit the incorrect time cards.
  B. Set the WFM Administrator Profile Value: HWM_ALLOW_RULE_EDITS to "Yes". Edit the deployed Rule to correct the input and output values. Resubmit the incorrect time cards.
  C. Delete the incorrect rule from the rule set. From the Manage Time Repository Rules task, select the incorrect rule and select Actions ?Edit Deployed Rule. Correct the input and output values. Re-add the corrected rule to the rule set using the appropriate edit options. Resubmit the incorrect time cards.
  D. Duplicate the incorrect Rule, and correct input and output values in the new rule. Update the rule set using the appropriate edit options to use the new rule. Resubmit the incorrect time cards.
  A. Set the WFM Administrator Profile Value: HWM_ALLOW_RULE_EDITS to "Yes". Delete the incorrect rule from the rule set. From the Manage Time Repository Rules task, select the incorrect rule and select Actions ?Edit Deployed Rule. Correct the input and output values. Re-add the corrected rule to the rule set using the appropriate edit options. Resubmit the incorrect time cards.

• Question 3:

  How should you configure Time and Labor Approvals to route to multiple approvers so that if a Payroll Layout time card only contains regular hours, it routes to the Line Manager, but if the time card contains an absence, it can also route to an HR admin?

  A. This is not possible.
  B. You should use the BPM Worklist and modify the BPM task: AbsencesApprovalsTask.
  C. You should use the BPM Worklist and modify the Payroll Time Card Approval -> BPM task:TimecardApproval.
  D. You should use the BPM Worklist and modify the Project Time Card Approval -> BPM task:ProjectTimecardApproval.
  E. You should use the BPM Worklist and modify the Payroll Time Card Approval -> BPM task:TimecardApproval and BPM Worklist, and modify the BPM task: AbsencesApprovalsTask.
  E. You should use the BPM Worklist and modify the Payroll Time Card Approval -> BPM task:TimecardApproval and BPM Worklist, and modify the BPM task: AbsencesApprovalsTask.

• Question 4:

  You need to configure a Time Card Layout for your customer that includes dependent Payroll Time Type attributes for input values.

  What process must you run to create these dependent attributes?

  A. the Generate Time Cards process
  B. the Load Time Card process
  C. the Generate Data Dictionary process
  D. the Time Events process
  E. the Time Card Synchronization process
  C. the Generate Data Dictionary process

  ---

  https://docs.oracle.com/cloud/r13_update17b/globalcs_gs/FAITL/FAITL2508588.htm#FAITL2233368

• Question 5:

  Your customer wants to define a new time card field. Which option includes the complete list of valid data sources?

  A. PVO, Independent value set, dependent value set, table defined value set, subset value set
  B. Independent value set
  C. PVO, independent value set, table defined value set
  D. PVO only
  C. PVO, independent value set, table defined value set

• Question 6:

  Managers need to highlight the overtime periods while reviewing their time cards. How should you configure this?

  A. You use personalization to enable the option.
  B. Select the Enable option to highlight overtime periods in the time review layout.
  C. Select the Enable option to highlight overtime periods in the time entry layout.
  D. No configuration needed
  B. Select the Enable option to highlight overtime periods in the time review layout.

• Question 7:

  You need a Time Entry Rule to run only when one or more of a certain group of Time Attribute values have been entered in the time card.

  How should you achieve this?

  A. Define a Time Category that will evaluate to True when the condition for executing the rule has been met and use this in the Time Entry Rule formula to define when the rule will run.
  B. Define an HCM Group that contains the required time attribute values and use this in the Time Entry Rule formula to define when the rule will run.
  C. Define a Time Category that will evaluate to True when the condition for executing the rule has been met and use this in the Time Entry Rule set to define when the rule will run.
  D. Define a Time Category that will evaluate to True when the condition for executing the rule has been met and use this in the Time Entry Rule Template to define when the rule will run.
  E. Define an HCM Group that contains the required time attribute values and use this in the Time Entry Rule set to define when the rule will run.
  E. Define an HCM Group that contains the required time attribute values and use this in the Time Entry Rule set to define when the rule will run.

• Question 8:

  What When executing the Generate Time Card Fields process, that will be setting the parameter "Include Absence Types" to Yes accomplish?

  A. enables Absence entries on the time entry and calendar entry layouts
  B. none of the above
  C. creates a multiple-attribute time card field with Absence Management type and Payroll Time type time attributes
  D. enables entry of Absence Plans directly on the time entry and calendar entry layouts
  E. updates available absence values for selection within the existing time card fields
  F. creates a multiple-attribute time card field with only the Absence Management type time attribute
  A. enables Absence entries on the time entry and calendar entry layouts

• Question 9:

  How should you define a new, single attribute time card field with a new data source for the Project Costing Task time attribute that is dependent on the Project Costing Project value selected?

  A. Define the new time card field as an independent time card field using a properly defined table value set as the new data source.
  B. Define the new time card filed as a dependent time card field, using the new data source with a properly defined table value set with the independent time card fields as the required Project Costing ?Expenditure Type time attribute.
  C. Define the new time card field by entering the correct parameters when running the Generate Time Card Fields process.
  D. Only the delivered Project Costing Task time card field may be used in Cloud Time and Labor.
  E. Define the new Task time card filed as a dependent time card filed using the new data source with a properly defined table value set, defined using the Dependent Field Definition page for the independent Project Costing ?Projects Time Card Field.
  E. Define the new Task time card filed as a dependent time card filed using the new data source with a properly defined table value set, defined using the Dependent Field Definition page for the independent Project Costing ?Projects Time Card Field.

• Question 10:

  A client wants their workers to report earned compensatory time on their time cards.

  What three-time entry setup configuration tasks do you need to complete during implementation before workers can report compensatory time?

  A. Manage Time Entry Layout Components
  B. Manage Time Layout Sets
  C. Manage Time Calculation Rules
  D. Create an Absence Plan and enroll workers in the plan
  E. Manage Time Consumers
  A. Manage Time Entry Layout Components
  B. Manage Time Layout Sets
  D. Create an Absence Plan and enroll workers in the plan