Oracle 1Z0-1045-22 Online Practice Questions and Exam Preparation

Oracle 1Z0-1045-22 Online Questions & Answers

• Question 31:

  You are the Inventory Control Supervisor at your employer's East Coast facility. Your employer is a 3PL, and your customer is a large company that is also serviced out of the other 3PL facilities. As you start the shift, your Inventory Control

  team members inform you of a significant change in the RF Cycle Counting process.

  Lost IBLPNs are now updates with a "00" lock code rather than the expected "LL" code.

  Which scenario is causing this issue?

  A. You dismiss the concern because a change in the lock code has no impact on either the WMS Cloud or host inventories.
  B. Your counterpart at the 3PL's other facility changed one of the cycle counting company parameters and that impacted your workflow for that same company.
  C. An inventory team member in the other facility marked a lost case with "00" lock code causing all subsequent lost cases to be defaulted to the same code across all LPNs for all company/facility combinations.
  D. While counting LPNs at a location, one of your team members marked a lost case with the new lock code. The new lock code is stored in system memory and applied to all IBLPNs counted as "Lost".
  E. One of your inventory team members changed his/her RF parameter default lock code causing the same configuration change to propagate to all users in the facility.
  D. While counting LPNs at a location, one of your team members marked a lost case with the new lock code. The new lock code is stored in system memory and applied to all IBLPNs counted as "Lost".

• Question 32:

  The following configuration is set for the Advance Shipment Notification type: 10% Under Receipt Warning, 10% Over Receipt Warning, and 20% Over Receipt error. Which two statements match the condition set if the ASN Qty is 100? (Choose two.)

  A. When the Operator receives 125 units, the RF screen displays an Over Receipt warning message.
  B. When the Operator receives 101, the RF screen displays an Over receipt warning message.
  C. When the Operator receives 110, the RF screen displays an Over Receipt warning message.
  D. When the Operator receives 89, the RF screen displays an Under Receipt warning message.
  E. When the Operator receives 130 units, the RF screen displays an Over Receipt error message.
  C. When the Operator receives 110, the RF screen displays an Over Receipt warning message.
  E. When the Operator receives 130 units, the RF screen displays an Over Receipt error message.

• Question 33:

  A warehouse manager needs to view additional information not available in the existing Picking applications. Identify two ways to fulfill this requirement. (Choose two.)

  A. Create a custom WMS BI Cloud showing the information.
  B. Access data through SQL.
  C. Modify the base application to display additional information.
  D. Use a base WMS BI Cloud showing the needed information.
  A. Create a custom WMS BI Cloud showing the information.
  C. Modify the base application to display additional information.

• Question 34:

  The above diagram shows a typical Third Party Logistics (3PL) structure. Identify the Facility, Company, and User levels, as applicable, in sequential order (that is, the proper label for box 1 is listed 1st in sequence).

  

  A. 1=Facility 1, 2=Company 1, 3=Company 2, 4=Super User 1, 5=Facility 2, 6=Facility 3, 7=Facility 4
  B. 1=Parent 3PL, 2=Facility 1,3=Facility 2, 4=Company 1, 5=Company 2, 6=Company 3, 7=Company 1
  C. 1=Company 1, 2=Parent 3PL, 3=Company 2, 4=Facility 1, 5=Facility 2, 6=Facility 3, 7=Facility 4
  D. 1=Super User, 2=Parent 3PL, 3=Company 1, 4=Facility 1, 5-Facility 2, 6=Facility 3, 7=Facility 4
  C. 1=Company 1, 2=Parent 3PL, 3=Company 2, 4=Facility 1, 5=Facility 2, 6=Facility 3, 7=Facility 4

• Question 35:

  Identify two scenarios in which the user can select the "Release Pick Info" option in the Wave Inquiry UI to generate the wave information for MHE systems. (Choose two.)

  A. after wave picking has started for all allocations (alloc_qty>packed_qty, but packed_qty>0)
  B. if all the lines are picked (if allocations packed qty=alloc qty) for all the allocations
  C. after wave picking has started, but some allocations have not been picked yet (allocations having packed_qty=0)
  D. packed_qty not evaluated when sending Wave Pick Info
  E. if picking has not started for the wave
  A. after wave picking has started for all allocations (alloc_qty>packed_qty, but packed_qty>0)
  C. after wave picking has started, but some allocations have not been picked yet (allocations having packed_qty=0)

• Question 36:

  Your company's count process has two levels:

  First, at the end of each quarter, the operators will need to get a list of all the LPN numbers in every location via cycle count.

  Second, at the end of each month, the operators will do a spot check for any 100 LPNs and count their content information, and to save time, they will scan each item only once and enter the total quantity of the item marked on the inner

  package inside an LPN. Your company has reserve locations only for storage and you're doing the WMS Cloud configuration for the operators.

  Which two tasks should you complete? (Choose two.)

  A. Create a Cycle Cnt RF screen for the operators to use, and leave the content-count RF parameter blank.
  B. Create a Resv Nbr Cnt RF screen for the operators to use.
  C. Enable the Recount Location Detail cc_trigger.
  D. Create a Cycle Cnt RF screen for the operators to use, and set the content-count RF parameter to By Sku Qty.
  E. Create a Cycle count for LPN deferred/immediate updates RF screen for the operators to use, and set the sku-scan-mode RF parameter to By Qty Scan.
  B. Create a Resv Nbr Cnt RF screen for the operators to use.
  E. Create a Cycle count for LPN deferred/immediate updates RF screen for the operators to use, and set the sku-scan-mode RF parameter to By Qty Scan.

• Question 37:

  The customer wants to change the items and quantities on an existing order in the WMS Cloud. Identify the method they can use to achieve this.

  A. The customer may send a "Cancel Order" transaction via integration just before the order is shipped.
  B. The customer may send a replacement order by sending a new order and referencing the original order in the "Order Number to Replace" field prior to shipping of the original order.
  C. Once the order is Shipped Confirmed, the customer may adjust the items and quantities via their maps.
  D. The customer may change the items on the Order in the UI at any order status.
  E. The order cannot be changed and must be processes as is.
  B. The customer may send a replacement order by sending a new order and referencing the original order in the "Order Number to Replace" field prior to shipping of the original order.

• Question 38:

  Which two options are true if inventory is unallocated and unavailable? (Choose two.)

  A. Inventory located in a drop zone
  B. Inventory located in active location
  C. Unlocked inventory located in reserve location
  D. Inventory in locations with lock codes
  C. Unlocked inventory located in reserve location
  D. Inventory in locations with lock codes

• Question 39:

  Which two fields are mandatory to set up a carrier in the Carrier Set-Up UI, if you want to utilize Parcel Carriers to fulfill orders? (Choose two.)

  A. Carrier Phone Number
  B. The Ship Via
  C. The Company
  D. The Carrier Type
  E. The Description
  B. The Ship Via
  D. The Carrier Type

• Question 40:

  While working on the configuration of your client, you uncover that the ASNs will always have the correct serial number information interfaced upfront and your client trusts the ASN information. Your client also needs the serial number

  information to get into WMS Cloud when the items are received from POs.

  Which three actions do you need to take, assuming that item A is serial-tracked? (Choose three.)

  A. Set item A's require serial number parameter to "Required, validate and allow user override".
  B. Create the IB Container barcode type.
  C. Create the Serial Number barcode type.
  D. Set the company parameter SERIAL_NUMBER_TRACKING_LEVEL TO 2.
  E. Set item A's require serial number parameter to "Required, don't Validate".
  A. Set item A's require serial number parameter to "Required, validate and allow user override".
  B. Create the IB Container barcode type.
  D. Set the company parameter SERIAL_NUMBER_TRACKING_LEVEL TO 2.