Oracle 1Z0-1045-22 Online Practice Questions and Exam Preparation

Oracle 1Z0-1045-22 Online Questions & Answers

• Question 1:

  You are the Inventory Control Supervisor at your employer's East Coast facility. Your employer is a 3PL, and your customer is a large company that is also serviced out of the other 3PL facilities. As you start the shift, your Inventory Control

  team members inform you of a significant change in the RF Cycle Counting process.

  Lost IBLPNs are now updates with a "00" lock code rather than the expected "LL" code.

  Which scenario is causing this issue?

  A. You dismiss the concern because a change in the lock code has no impact on either the WMS Cloud or host inventories.
  B. Your counterpart at the 3PL's other facility changed one of the cycle counting company parameters and that impacted your workflow for that same company.
  C. An inventory team member in the other facility marked a lost case with "00" lock code causing all subsequent lost cases to be defaulted to the same code across all LPNs for all company/facility combinations.
  D. While counting LPNs at a location, one of your team members marked a lost case with the new lock code. The new lock code is stored in system memory and applied to all IBLPNs counted as "Lost".
  E. One of your inventory team members changed his/her RF parameter default lock code causing the same configuration change to propagate to all users in the facility.
  D. While counting LPNs at a location, one of your team members marked a lost case with the new lock code. The new lock code is stored in system memory and applied to all IBLPNs counted as "Lost".

• Question 2:

  The above diagram shows a typical Third Party Logistics (3PL) structure. Identify the Facility, Company, and User levels, as applicable, in sequential order (that is, the proper label for box 1 is listed 1st in sequence).

  

  A. 1=Facility 1, 2=Company 1, 3=Company 2, 4=Super User 1, 5=Facility 2, 6=Facility 3, 7=Facility 4
  B. 1=Parent 3PL, 2=Facility 1,3=Facility 2, 4=Company 1, 5=Company 2, 6=Company 3, 7=Company 1
  C. 1=Company 1, 2=Parent 3PL, 3=Company 2, 4=Facility 1, 5=Facility 2, 6=Facility 3, 7=Facility 4
  D. 1=Super User, 2=Parent 3PL, 3=Company 1, 4=Facility 1, 5-Facility 2, 6=Facility 3, 7=Facility 4
  C. 1=Company 1, 2=Parent 3PL, 3=Company 2, 4=Facility 1, 5=Facility 2, 6=Facility 3, 7=Facility 4

• Question 3:

  Identify the type of functions you need to use to handle conditional information in a report.

  A. Arithmetic and Geometric Functions
  B. WMS BI Cloud does not support that type of functionality
  C. String Functions
  D. Dynamic Functions
  E. Logical Functions
  E. Logical Functions

• Question 4:

  A client can integrate with WMS Cloud by using the input interface. Which three options can be integrated? (Choose three.)

  A. Appointments
  B. Loads
  C. Orders
  D. Item
  B. Loads
  C. Orders
  D. Item

• Question 5:

  The customer wants to change the items and quantities on an existing order in the WMS Cloud. Identify the method they can use to achieve this.

  A. The customer may send a "Cancel Order" transaction via integration just before the order is shipped.
  B. The customer may send a replacement order by sending a new order and referencing the original order in the "Order Number to Replace" field prior to shipping of the original order.
  C. Once the order is Shipped Confirmed, the customer may adjust the items and quantities via their maps.
  D. The customer may change the items on the Order in the UI at any order status.
  E. The order cannot be changed and must be processes as is.
  B. The customer may send a replacement order by sending a new order and referencing the original order in the "Order Number to Replace" field prior to shipping of the original order.

• Question 6:

  Your customer wants to allocate Default Putaway Type and Drop location for the Blind IB LPNs after Putaway. Select the three configurations required to complete Putaway process. (Choose three.)

  A. Use Putaway Type defined in Putaway Type UI screen to set PUTAWAY_TYPE Parameter in Facility Parameter UI Screen
  B. Putaway Type should be defined in Putaway Type UI screen at Facility level.
  C. Set DEFAULT_DROP_LOCN Parameter in Company Parameter UI screen.
  D. Use Putaway Type defined in Putaway Type UI screen to set PUTAWAY_TYPE Parameter in Company parameter UI Screen.
  E. Set Putaway Priority and Rules in UI Screen at Facility level.
  F. Set DEFAULT_DROP_LOCN Parameter in Facility Parameter UI screen.
  A. Use Putaway Type defined in Putaway Type UI screen to set PUTAWAY_TYPE Parameter in Facility Parameter UI Screen
  D. Use Putaway Type defined in Putaway Type UI screen to set PUTAWAY_TYPE Parameter in Company parameter UI Screen.
  E. Set Putaway Priority and Rules in UI Screen at Facility level.

• Question 7:

  Your company wants to use Replenishment Wave to maintain adequate inventory levels to meet customer demand by fulfilling customer's orders on time. Which Replenishment Trigger Mode needs to be set up in the Replenishment Template for the following condition? For active Location P20A100 Minimum Volume = 20 Max Volume = 100 Percentage of Max = 20% Length = 20, Width = 40, Height = 60 If location P20A100 total volume goes below 20, the location is triggered for replenishment

  A. Minimum Capacity
  B. Reactive
  C. Order Based
  D. Percentage of Max
  D. Percentage of Max

• Question 8:

  Your customer wants to use Advance Shipment Notification (ASN) created in WMS Cloud System for receiving without RF gun and expects ASN to be verified. What are the two steps to complete the ASN receiving and verification transaction? (Choose two.)

  A. Create a Blind IB plate number and palletize after receiving
  B. Create a Blind IB plate number and cartonize before receiving
  C. Assign a dock door to IB shipment
  D. Create an ASN from the IB license plate screen
  E. Verify the IB shipment
  A. Create a Blind IB plate number and palletize after receiving
  C. Assign a dock door to IB shipment

• Question 9:

  Your client wants to do flow-through allocations. Which two types of packing transactions achieve this flow? (Choose two.)

  A. Packlpn
  B. Pick Cart
  C. Distribution
  D. PackNC
  C. Distribution
  D. PackNC

• Question 10:

  Select two true statements about Group Configuration. (Choose two.)

  A. Only the RF Menu uses the concept of Groups
  B. Users can assign specific access to activities by using Group permissions
  C. Permissions come already pre-assigned to standard Groups in the system and cannot be changed
  D. Users must log out when switching Groups
  E. User can belong to multiple Groups
  B. Users can assign specific access to activities by using Group permissions
  E. User can belong to multiple Groups