Citrix 1Y0-A26 Online Practice Questions and Exam Preparation

Citrix 1Y0-A26 Online Questions & Answers

• Question 101:

  An administrator notices that the target device is NOT starting from a newly created vDisk, but other target devices using different vDisks are working. Which action can the administrator take to correct this issue?

  A. Restart the Stream Service.
  B. Enable streaming on the vDisk.
  C. Reset the Active Directory machine account password.
  D. Change the vDisk access mode to Private Image mode.
  B. Enable streaming on the vDisk.

• Question 102:

  Scenario: An administrator is delivering Windows virtual machines using Provisioning services. The administrator needs to reduce the impact on Provisioning services disk consumption as well as maintain user operating system modifications.

  Which cache mode must be used in this scenario?

  A. Cache on Server
  B. Cache in Device RAM
  C. Cache on Server Persisted
  D. Cache on Device Hard Drive Persisted
  D. Cache on Device Hard Drive Persisted

• Question 103:

  An administrator needs to throttle traffic from the virtual print server because it has been impacting all virtual machines on the network. On which object should the QoS policy be configured?

  A. Network
  B. Global
  C. Server
  D. VM
  D. VM

• Question 104:

  An administrator needs to reconfigure the stream server boot list following a server failure.

  How could the administrator ensure the replacement server is included in the stream server boot list?

  A. Restart the Stream Service.
  B. Enable Automatic vDisk updates.
  C. Update the target device "Boot From" setting.
  D. Add the IP address of the new server to the ARDBP32.bin file.
  D. Add the IP address of the new server to the ARDBP32.bin file.

• Question 105:

  Scenario: A virtual machine that uses Provisioning services is accidentally deleted by an administrator. The administrator creates a new virtual machine from the same template that was used to create the virtual machine deleted. However, the virtual machine is NOT able to start up from the vDisk.

  What must the administrator do to resolve the issue?

  A. Assign the correct vDisk to the target device.
  B. Reconfigure the target device MAC address.
  C. Configure the target device to start up from vDisk.
  D. Create a target device for the new virtual machine.
  B. Reconfigure the target device MAC address.

• Question 106:

  Scenario: The SAN Administrator provided an NFS share for the XenServer Administrator to use. The share name is NfsLun01 and is located at 192.168.0.53. Which format must the administrator use to connect to the share?

  A. 192.168.0.53:/NfsLun01
  B. \192.168.0.53\NfsLun01
  C. 192.168.0.53:3260\NfsLun01
  D. http://192.168.0.53/NfsLun01
  A. 192.168.0.53:/NfsLun01

• Question 107:

  What can the administrator create to configure a high availability plan for a group of mission critical virtual machines in a single pool?

  A. Site
  B. vApp
  C. Folder
  D. Secondary Site
  B. vApp

• Question 108:

  An administrator needs to configure a Provisioning services environment for Microsoft volume license management. Which properties could the administrator configure to accomplish this task?

  A. Farm
  B. vDisk
  C. Server
  D. Target device
  B. vDisk

• Question 109:

  Scenario: An administrator is installing Provisioning services which uses PXE for starting virtual machines. DHCP is installed and configured in the environment. What additional component is required for the PXE environment to start a virtual machine?

  A. TFTP
  B. BootP
  C. SOAP Service
  D. Boot Device Manager
  A. TFTP

• Question 110:

  Scenario: An administrator notices a duplex mismatch on the network interface card (NIC) which is configured as the management interface. The administrator realizes that the switch was set to 100 full, but XenServer auto-configured the NIC to 100 half, autoneg=on.

  How can the administrator ensure the XenServer host does NOT auto- configure the NIC in the future?

  A. Change the NIC properties in the xsconsole.
  B. Use the xe pif-configure-ip command to disable auto-configuration.
  C. Use the xe pif-param-set command to set other-config:ethtool-autoneg=off.
  D. Assign a new NIC to the management interface within the XenCenter Network tab.
  C. Use the xe pif-param-set command to set other-config:ethtool-autoneg=off.