Citrix 1Y0-351 Online Practice Questions and Exam Preparation

Citrix 1Y0-351 Online Questions & Answers

• Question 131:

  In order to create a three-node NetScaler cluster, all nodes must __________ and __________. (Choose the two correct options to complete the sentence.)

  A. be physical appliances
  B. have Platinum licensing
  C. be using the same build
  D. be the same platform model
  C. be using the same build
  D. be the same platform model

• Question 132:

  An engineer has two NetScaler devices in two different datacenters and wants to create a high availability (HA) pair with the two devices, even though they are on two different subnets. How can the engineer configure the HA Pair between the two NetScaler devices?

  A. Configure StaySecondary on the second datacenter appliance.
  B. Ensure that INC mode is enabled during the creation of the HA Pair.
  C. Enable the HAMonitors on all interfaces after the HA Pair has been created.
  D. Change the NSIP of the second appliance to be on the same subnet as the first appliance.
  B. Ensure that INC mode is enabled during the creation of the HA Pair.

• Question 133:

  Which option must a NetScaler Engineer set to enable client keep-alive mode?

  A. -cka yes
  B. -usip yes
  C. -cip disabled
  D. -useproxyport yes
  A. -cka yes

• Question 134:

  Scenario: Primary NetScaler (NS1) is licensed for 10000 Maximum ICA users and 305 Access Gateway users. Secondary NetScaler (NS2) is licensed for 10000 Maximum ICA users and five Access Gateway users. From where and which command should a network engineer run to display diagnostics on the

  licenses?

  A. From the shell, run 'view license'.
  B. From the shell, run 'more /var/log/license.log'.
  C. From the command-line interface, run 'show license'.
  D. From the command-line interface, run 'cat /var/log/license.log'.
  B. From the shell, run 'more /var/log/license.log'.

• Question 135:

  Which client c the NetScaler may use?

  A. Accept
  B. User-Agent
  C. Content-Type
  D. Accept-Encoding
  D. Accept-Encoding

• Question 136:

  Scenario: GSLB has been configured for use within a multisite environment. The MEP status is reported as down on all GSLB appliances. The appliances have been configured for unsecured MEP exchange. Which port must the network engineer ensure is open between the NetScaler appliances?

  A. TCP 3011
  B. UDP 3011
  C. TCP 3012
  D. UDP 3012
  A. TCP 3011

• Question 137:

  Which protocol can be monitored by Insight Center?

  A. FTP
  B. HTTP
  C. RTSP
  D. RADIUS
  B. HTTP

• Question 138:

  An engineer has bound three monitors to a service group and configured each of the monitors with a weight of 10.

  How should the engineer ensure that the members of the service group are marked as DOWN when at least two monitors fail?

  A. Re-configure the weight of each monitor to 0.
  B. Configure the service group with a threshold of 21.
  C. Configure the service group with a threshold of 20.
  D. Re-configure the weight of each monitor to 5, and configure the service group threshold to 15.
  C. Configure the service group with a threshold of 20.

• Question 139:

  Scenario: A NetScaler environment uses two-factor authentication and the second authentication

  method is AD. A user logs in to the environment but does NOT receive access to the resources that the user should have access to.

  How can an engineer determine the AD authentication issue on the NetScaler?

  A. Check NSlogs
  B. Use nsconmsg
  C. Use the cat aaad.debug command
  D. Check the authorization configuration
  C. Use the cat aaad.debug command

• Question 140:

  While performing some re-cabling, a NetScaler engineer noticed that a power supply unit failed on a NetScaler appliance. What should the engineer enable to receive notification of a future hardware failure?

  A. SMTP
  B. SNMP
  C. Health monitoring
  D. EdgeSight monitoring
  B. SNMP