1. Home
  2. CheckPoint
  3. 156-915.80

CheckPoint 156-915.80 Online Practice Questions and Exam Preparation

156-915.80 Exam Details

  • Exam Code
    :156-915.80
  • Exam Name
    :Check Point Certified Security Expert Update - R80.10
  • Certification
    :Checkpoint Certifications
  • Vendor
    :CheckPoint
  • Total Questions
    :536 Q&As
  • Last Updated
    :May 28, 2026

CheckPoint 156-915.80 Online Questions & Answers

  • Question 71:

    How many interfaces can you configure to use the Multi-Queue feature?

    A. 10 interfaces
    B. 3 interfaces
    C. 4 interfaces
    D. 5 interfaces

  • Question 72:

    Because of pre-existing design constraints, you set up manual NAT rules for your HTTP server. However, your FTP server and SMTP server are both using automatic NAT rules. All traffic from your FTP and SMTP servers are passing through the Security Gateway without a problem, but traffic from the Web server is dropped on rule 0 because of anti-spoofing settings. What is causing this?

    A. Manual NAT rules are not configured correctly.
    B. Allow bi-directional NAT is not checked in Global Properties.
    C. Routing is not configured correctly.
    D. Translate destination on client side is not checked in Global Properties under Manual NAT Rules.

  • Question 73:

    Assume you are a Security Administrator for ABCTech. You have allowed authenticated access to users from Mkting_net to Finance_net. But in the user's properties, connections are only permitted within Mkting_net. What is the BEST way to resolve this conflict?

    A. Select Ignore Database in the Action Properties window.
    B. Permit access to Finance_net.
    C. Select Intersect with user database in the Action Properties window.
    D. Select Intersect with user database or Ignore Database in the Action Properties window.

  • Question 74:

    In a zero downtime scenario, which command do you run manually after all cluster members are upgraded?

  • Question 75:

    What are the three components for Check Point Capsule?

    A. Capsule Docs, Capsule Cloud, Capsule Connect
    B. Capsule Workspace, Capsule Cloud, Capsule Connect
    C. Capsule Workspace, Capsule Docs, Capsule Connect
    D. Capsule Workspace, Capsule Docs, Capsule Cloud

  • Question 76:

    Due to high CPU workload on the Security Gateway, the security administrator decided to purchase a new multicore CPU to replace the existing single core CPU. After installation, is the administrator required to perform any additional tasks?

    A. Go to clash-Run cpstop|Run cpstart
    B. Go to clash-Run cpconfig|Configure CoreXL to make use of the additional Cores|Exit cpconfig|Reboot Security Gateway
    C. Administrator does not need to perform any task. Check Point will make use of the newly installed CPU and Cores
    D. Go to clash-Run cpconfig|Configure CoreXL to make use of the additional Cores|Exit cpconfig|Reboot Security Gateway|Install Security Policy

  • Question 77:

    Where do you verify that UserDirectory is enabled?

    A. Verify that Security Gateway > General Properties > Authentication > Use UserDirectory (LDAP) for Security Gateways is checked
    B. Verify that Global Properties > Authentication > Use UserDirectory (LDAP) for Security Gateways is checked
    C. Verify that Security Gateway > General Properties > UserDirectory (LDAP) > Use UserDirectory (LDAP) for Security Gateways is checked
    D. Verify that Global Properties > UserDirectory (LDAP) > Use UserDirectory (LDAP) for Security Gateways is checked

  • Question 78:

    You have existing dbedit scripts from R77. Can you use them with R80.10?

    A. dbedit is not supported in R80.10
    B. dbedit is fully supported in R80.10
    C. You can use dbedit to modify threat prevention or access policies, but not create or modify layers
    D. dbedit scripts are being replaced by mgmt._cli in R80.10

  • Question 79:

    How many interfaces can you configure to use the Multi-Queue feature?

    A. 10 interfaces
    B. 3 interfaces
    C. 4 interfaces
    D. 5 interfaces

  • Question 80:

    You need to change the MAC-address on eth2 interface of the gateway. What command and what mode will you use to achieve this goal?

    A. set interface eth2 mac-addr 11:11:11:11:11:11; CLISH
    B. ifconfig eth1 hw 11:11:11:11:11:11; expert
    C. set interface eth2 hw-addr 11:11:11:11:11:11; CLISH
    D. ethtool -i eth2 mac 11:11:11:11:11:11; expert

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only CheckPoint exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 156-915.80 exam preparations and CheckPoint certification application, do not hesitate to visit our Vcedump.com to find your solutions here.