CheckPoint 156-215.75 Online Practice Questions and Exam Preparation

CheckPoint 156-215.75 Online Questions & Answers

• Question 61:

  The customer wishes to install a cluster. In his network, there is a switch which is incapable of forwarding multicast. Is it possible to install a cluster in this situation?

  A. Yes, you can toggle on ClusterXL between broadcast and multicast by setting the multicast mode using the command cphaconf set_ccp multicast on　ff. The default setting is broadcast.
  B. Yes, you can toggle on ClusterXL between broadcast and multicast using the command cphaconf set_ccp broadcast/multicast.
  C. No, the customer needs to replace the switch with a new switch, which supports multicast forwarding.
  D. Yes, the ClusterXL changes automatically to the broadcast mode if the multicast is not forwarded.
  B. Yes, you can toggle on ClusterXL between broadcast and multicast using the command cphaconf set_ccp broadcast/multicast.

• Question 62:

  How is the SmartWorkflow Session Information Pane enabled?

  A. In SmartView Tracker, click on SmartWorkflow > Show Session Information Pane
  B. In SmartDashboard, click on View > Smart Workflow > Show Session Information Pane
  C. In SmartDashboard, click on SmartWorkflow > Show Session Information Pane
  D. In cpconfig, choose Enable Session Information Pane from the menu
  C. In SmartDashboard, click on SmartWorkflow > Show Session Information Pane

• Question 63:

  Check Point Clustering protocol, works on:

  A. UDP 500
  B. UDP 8116
  C. TCP 8116
  D. TCP 19864
  B. UDP 8116

• Question 64:

  When configuring a Web Application for SSL VPN remote access, you have given the following definition for the application along with its protection level.

  Which of the following is the best match for the above application?

  A. dmz.example.com/extranet
  B. www.dmz.example/extranet
  C. www.example.com/intranet
  D. hr.dmz.example.com/intranet
  C. www.example.com/intranet

• Question 65:

  You configure a Check Point QoS Rule Base with two rules: an HTTP rule with a weight of 40, and the Default Rule with a weight of 10. If the only traffic passing through your QoS Module is HTTP traffic, what percent of bandwidth will be allocated to the HTTP traffic?

  A. 80%
  B. 40%
  C. 100%
  D. 50%
  D. 50%

• Question 66:

  You want to upgrade a SecurePlatform NG with Application Intelligence (Al) R55 Gateway to SecurePlatform NGX R60 via SmartUpdate. Which package is needed in the repository before upgrading?

  A. SVN Foundation and VPN-1 Express/Pro
  B. VPN-1 and Firewall-1
  C. SecurePlatform NGX R60
  D. SVN Foundation 3 E. VPN-1 Pro/Express NGXR60
  C. SecurePlatform NGX R60

• Question 67:

  DRAG DROP

  In a Management High Availability (HA) configuration, you can configure synchronization to occur automatically. Select the best response for the synchronization sequence.

  Select and Place:

  

  

• Question 68:

  _________ is the called process that starts when opening SmartView Tracker application.

  A. logtrackerd
  B. fwlogd
  C. CPLMD
  D. FWM
  C. CPLMD

• Question 69:

  Math the SmartDashboard session status icons with the appropriate SmartWorkflow session status:

  

  A. 1-A, 2-B, 3-C, 4-D, 5-E
  B. 1-B, 2-A, 3-D, 4-E, 5-C
  C. 1-C, 2-B, 3-A, 4-D, 5-E
  D. 1-E, 2-D, 3-C, 4-B, 5-A
  B. 1-B, 2-A, 3-D, 4-E, 5-C

• Question 70:

  Which of the following software blades can be used to provide centralized backup management?

  A. SmartDashboard
  B. SmartProvisioning
  C. SmartGateway
  D. SmartBackup
  B. SmartProvisioning