CompTIA SK0-003 Online Practice Questions and Exam Preparation

CompTIA SK0-003 Online Questions & Answers

• Question 231:

  During a printer driver installation, a message appears stating "The software being installed for this hardware has not passed Windows logo testing". Which of the following is the SAFEST course of action for the administrator to take?

  A. Continue with installation
  B. Install .dll files needed for the printer
  C. Obtain a Microsoft certified driver
  D. Restart the printer and try again
  C. Obtain a Microsoft certified driver

• Question 232:

  A server will run for about 30 minutes and then shut down suddenly. Which of the following is MOST likely causing this behavior?

  A. Power supply failure
  B. Hard Drive failure
  C. Cooling failure
  D. POST failure
  C. Cooling failure

• Question 233:

  Which of the following is the MOST important concern when deciding on the servers locations?

  A. Form factor
  B. Inadequate air flow
  C. Too high from ground level
  D. Difficulty of physical access
  B. Inadequate air flow

• Question 234:

  A technician is replacing memory in a server whose motherboard supports PC3-8500 memory. This type of memory is also known as which of the following?

  A. SDRAM
  B. DDR
  C. DDR3
  D. DDR2
  C. DDR3

• Question 235:

  A high availability solution must be designed for a single file server. Data must be replicated between the disks to ensure a failure of one disk does not bring down the server. Which of the following meets these requirements?

  A. RAID 1
  B. RAID 0
  C. Active/passive cluster
  D. Disk-to-disk
  A. RAID 1

• Question 236:

  A user reports they cannot access the internal company website after maintenance was performed on the website server. When a technician arrives on site to troubleshoot the issue, which of the following steps should they perform FIRST?

  A. Establish a theory of probable cause
  B. Establish a plan of action to resolve the problem
  C. Identify changes made to the server
  D. Run a backup job and verify data
  C. Identify changes made to the server

• Question 237:

  Which of the following is the purpose of using a network attached storage device?

  A. To provide storage space to network devices
  B. To provide a high-speed network for different types of storage devices
  C. To automatically load optical media via a robotic device
  D. To classify, catalog, and maintain backup media
  A. To provide storage space to network devices

• Question 238:

  An administrator is troubleshooting a power supply that is believed to have failed. Which of the following tools will BEST help test the power supply?

  A. ESD Equipment
  B. Multimeter
  C. POST Card
  D. Toner Probe
  B. Multimeter

• Question 239:

  Which of the following allows two NICs to share one IP address and continue to operate in the event of a single NIC failure?

  A. NIC redundancy
  B. NIC teaming
  C. DHCP forwarding
  D. Hot-swappable NIC
  B. NIC teaming

• Question 240:

  A technician is asked to install a tape drive supporting tapes that will hold up to 400GB of data on each tape. Which of the following tape drives should the technician install?

  A. DDS-4
  B. SDLT 600
  C. DAT72
  D. LTO-3
  D. LTO-3