CompTIA SG0-001 Online Practice Questions and Exam Preparation

CompTIA SG0-001 Online Questions & Answers

• Question 431:

  Which of the following documentation should be referenced FIRST when deciding how long to retain backup data?

  A. Offsite storage contract
  B. Standards compliance
  C. Industry best practices
  D. Corporate compliance
  D. Corporate compliance

• Question 432:

  When connecting two FC switches using FCIP across an IP circuit, which of the following ensures that the FC frames are not segmented?

  A. Link aggregation
  B. TOE
  C. Jumbo frames
  D. Dedicated links
  C. Jumbo frames

• Question 433:

  Which of the following can be used to optimize the bandwidth between connected switches?

  A. Port groups
  B. Trunking
  C. ISL
  D. Routing
  B. Trunking

• Question 434:

  A way to increase bandwidth from a host to a storage device, utilizing an FC storage area network, is by configuring which of the following on the host?

  A. Teaming
  B. Multipathing
  C. Link aggregation
  D. Trunking
  B. Multipathing

• Question 435:

  An administrator has 4 SAS drives that the manufacturer lists at 140 IOPS. How many IOPS combined would these drives have in a single RAID 0+1?

  A. 140 Read or 140 Write IOPS
  B. 280 Read or 140 Write IOPS
  C. 560 Read or 280 Write IOPS
  D. 560 Read or 560 Write IOPS
  C. 560 Read or 280 Write IOPS

• Question 436:

  A datacenter has a hierarchy of multiple storage systems with SSDs, FC disks, SATA disks, and JBODs. Which of the following classifies this arrangement?

  A. LVM
  B. FCoTR
  C. Tiers
  D. HSM
  C. Tiers

• Question 437:

  Which of the following are true when comparing iSCSI and CIFS protocols? (Select TWO).

  A. iSCSI was developed mainly for databases
  B. Server can be booted from iSCSI
  C. iSCSI is used in Fibre Channel
  D. CIFS is commonly used in UNIX
  E. Storage appears as a local disk using iSCSI
  B. Server can be booted from iSCSI
  E. Storage appears as a local disk using iSCSI

• Question 438:

  An administrator has just installed a brand new HBA into a host and needs to connect that host to the SAN. Which of the following connector types should be used?

  A. ST
  B. RJ-45
  C. LC
  D. SFP
  C. LC

• Question 439:

  In a redundant fabric configuration, which of the following is the MINIMUM number of single port HBAs that a server must have, to sustain a single fabric failure?

  A. 1
  B. 2
  C. 4
  D. 8
  B. 2

• Question 440:

  Which of the following describes an ISL connection?

  A. Between an initiator and a target
  B. Between a specific node (NL-port) and an a switch
  C. From any Loop port within a Loop
  D. Between two fabric switches
  D. Between two fabric switches