CompTIA SG0-001 Online Practice Questions and Exam Preparation

CompTIA SG0-001 Online Questions & Answers

• Question 331:

  A server has two HBAs each connected to redundant fabrics. The fabrics have multiple connections to the storage targets. Which of the following is true?

  A. Multipathing will not work in this configuration
  B. Multipathing will not be needed in this configuration
  C. Multipathing will provide high availability
  D. Each HBA is a single point of failure
  C. Multipathing will provide high availability

• Question 332:

  Queue Depths can be defined as which of the following?

  A. A value of the FICON status menu
  B. The number of pending SCSI commands
  C. A type of issue with large bandwidth
  D. The number of Layer 2 processes on the fiber
  B. The number of pending SCSI commands

• Question 333:

  A new LUN is added to a mission critical host from the storage array on which the host is currently already accessing 2 LUNS; which of the following is the FIRST step required to utilize the new LUN?

  A. Change the zoning to allow the host to see the new LUN.
  B. Initiate a rescan from the host.
  C. Initiate a Name Server update.
  D. Reboot the host.
  B. Initiate a rescan from the host.

• Question 334:

  Which of the following port types is used for connecting two switches in the same fabric?

  A. E-port
  B. F-port
  C. G-port
  D. U-port
  A. E-port

• Question 335:

  Which of the following is the main difference between NAS and DAS?

  A. NAS cannot be shared amongst multiple computers
  B. DAS can offer a fault tolerant design
  C. DAS does not use network devices.
  D. NAS uses an HBA. DAS does not use an HBA
  C. DAS does not use network devices.

• Question 336:

  Which of the following is a protocol that enables serverless backup?

  A. SMTP
  B. SNMP
  C. NDMP
  D. SMPTE
  C. NDMP

• Question 337:

  Which of the following backup types would BEST be used for fast backups and allow for offsite storage?

  A. Tape
  B. D2D2T
  C. Optical
  D. D2D
  B. D2D2T

• Question 338:

  A server is having random issues communicating with a Fibre Channel direct attached storage system. Which of the following items should the technician replace FIRST?

  A. Host Bus Adapter (HBA)
  B. Storage controller
  C. FC switch
  D. Fiber optic cable
  D. Fiber optic cable

• Question 339:

  Two Fibre Channel directors are being installed in a rack. The rack has two power buses, each attached to a separate Power Distribution Unit (PDU). The directors have dual power supplies tosupply N+1 power to the directors. In which of the following ways should the power supplies be attached to the rack power busses?

  A. Each director should be connected into a separate power bus.
  B. Each director's power supplies should connect to a separate power bus.
  C. Both directors should be plugged into the same power bus; the second bus should be designated as "Stand-by".
  D. As long as the directors are grounded, it does not matter which bus is used
  B. Each director's power supplies should connect to a separate power bus.

• Question 340:

  A new host has been added to the SAN and new LUNS have been created for the host's use. The administrator has created an alias for the host WWPN and placed that alias in to a zone. Which of the following must the administrator do NEXT to enable connectivity between the host and storage array?

  A. Add the initiator to the zone and enable the configuration.
  B. Add a zone for the array and enable the configuration
  C. Add the target to the zone and enable the configuration.
  D. Add another alias to the zone and enable the configuration
  C. Add the target to the zone and enable the configuration.