CompTIA SG0-001 Online Practice Questions and Exam Preparation

CompTIA SG0-001 Online Questions & Answers

• Question 181:

  An environment includes an active/passive array and 2Gbps ports for the array controllers, switches, and host HBAs. The SAN is fully redundant and highly available. A new host is attached and LUNs are assigned to benchmark throughput. Which of the following is the HIGHEST throughput the administrator can expect?

  A. 2Gbps
  B. 4Gbps
  C. 6Gbps
  D. 8Gbps
  A. 2Gbps

• Question 182:

  Which of the following is a neighbor discovery protocol that sends out and receives detailed Layer 2 network information to other connected access devices and can be used by any vendor?

  A. FCOE
  B. LDAP
  C. CDP
  D. LLDP
  D. LLDP

• Question 183:

  Which of the following protocols would be used on a host to access network share called \\server1.chicago.net\data?

  A. FCoE
  B. CIFS
  C. FC
  D. iSCSI
  B. CIFS

• Question 184:

  When configuring a NAS device for access from a Linux client, which of the following is the BEST protocol to use?

  A. iFCP
  B. CIFS
  C. NFS
  D. iSCSI
  C. NFS

• Question 185:

  Which of the following is MAXIMUM distance for 50 micron multimode fiber at 4Gb?

  A. 10 meters (32.8 feet)
  B. 175 meters (574 feet)
  C. 800 meters (2624.7 feet)
  D. 2 kilometers (1.24 miles)
  B. 175 meters (574 feet)

• Question 186:

  Which of the following is true of both deduplication and compression?

  A. Data is more resilient to bad blocks and redundancy
  B. Data access is faster for both read and write
  C. Compression and deduplication rates are uniform across data sets
  D. Less physical space is required to store the data
  D. Less physical space is required to store the data

• Question 187:

  To prevent injury during rack loading which of the following should be implemented?

  A. Non-powered tools
  B. Proper lifting techniques
  C. Antistatic device deployment
  D. Proper device cabling
  B. Proper lifting techniques

• Question 188:

  The storage system has been provisioned and a rescan of the devices has been performed within the operating system. A technician sees twice as many devices than were provisioned. Which of the following is the MOST likely cause?

  A. One of the fiber connections is loose.
  B. One of the HBAs is zoned incorrectly.
  C. Multipathing has not been installed or configured.
  D. The technician rescanned the devices more than once.
  C. Multipathing has not been installed or configured.

• Question 189:

  A FC SAN environment has a single director for each fabric. The SAN administrator wants to separate tape and disk traffic in a very secure manner. Which of the following virtualization methods should be considered?

  A. VLANs
  B. VSANs
  C. NPIV
  D. FC Routing
  B. VSANs

• Question 190:

  The storage technician is setting up a zoning implementation within a Fibre Channel fabric and needs to implement a feature on the switches for granting authorization to data between different zones through a unique device identifier. Which of the following would need to be implemented to satisfy this requirement?

  A. Port Zoning
  B. Redundant Fabrics
  C. LUN Masking
  D. WWN Zoning
  D. WWN Zoning