CompTIA SG0-001 Online Practice Questions and Exam Preparation

CompTIA SG0-001 Online Questions & Answers

• Question 111:

  An administrator, in preparation for a new server with dual HBAs connected to multiple fabrics, created a new WWN zone to add a new server and storage connections to Fabric

  A. The administrator then copied the zone in to the zoning configuration for Fabric B and activated it in both fabrics. How many paths will the new server see to the storage array when it is brought online the next day?
  B. Zero, the zoning configuration conflict will negate all paths
  C. One, the zone written for Fabric A will not work in Fabric B.
  D. Two, each storage array has a path in each fabric.
  E. Four, there are two ports of storage in each fabric
  B. Zero, the zoning configuration conflict will negate all paths

• Question 112:

  An administrator has a requirement to monitor a particular piece of equipment with a monitoring tool utilizing Read Only community strings. Which of the following describes this example?

  A. CHAP
  B. Kerberos
  C. SMI-S
  D. SNMP
  D. SNMP

• Question 113:

  An administrator is installing a new cable plant in a datacenter. The administrator plans on using 50 micron multi-mode cabling that is in stock. Which of the following needs to be considered when using this cable?

  A. Cable color
  B. Connectors are MIC
  C. Connectors must be LC
  D. Distance
  D. Distance

• Question 114:

  Which of the following would MOST easily prevent zoning conflicts and fabric segmentation?

  A. Ensure zoning information from a new storage switch is cleared before adding it to the fabric.
  B. Only configure zoning once at installation; reconfigure all switches if zoning must change.
  C. Create separate fabrics as zoning can only be configured on one switch.
  D. Configure zoning information on the HBA's not the storage switches.
  A. Ensure zoning information from a new storage switch is cleared before adding it to the fabric.

• Question 115:

  Which of the following identifiers occur in a storage fabric once and is always unique?

  A. Node Symbolic Link Name
  B. World Wide Port Name
  C. World Wide Node Name
  D. Fibre Channel MAC Address
  B. World Wide Port Name

• Question 116:

  A system administrator has recently replaced a failed redundant HBA. Which of the following MUST be done in order to connect the LUNs to the replacement HBA?

  A. The iSCSI initiators must be restarted on the affected servers
  B. All drives must upload the new HBA firmware before it becomes active
  C. The SAN must rebuild the newly installed HBA's file system.
  D. The SAN zone must be configured for the new WWPN
  D. The SAN zone must be configured for the new WWPN

• Question 117:

  Which of the following will be required to be able to read the data on an encrypted LTO-4 backup tape, if the tape has to be imported at the DR target site?

  A. Encryption keys from the source site
  B. An LTO-3 tape drive which supports encryption
  C. Plain text cipher key from the source site
  D. IPSec encryption keys and ACLs from the source site
  A. Encryption keys from the source site

• Question 118:

  A customer has asked the SAN consultant for help with zoning best practices for a large datacenter. The consultant recommends zones based on which of the following?

  A. Single initiators
  B. Storage array
  C. Operating system
  D. HBA vendor
  A. Single initiators

• Question 119:

  When setting up queue depths in the below environment parameters:

  -A storage device's port queue depth setting is set to 160

  -

  They would like to assign 4 host HBAs to each port

  Which of the following depth values would be the BEST to assign to each HBA?

  A. 40
  B. 80
  C. 160+
  D. Default value
  A. 40

• Question 120:

  An initiator can be defined as which of the following?

  A. A host that requests or submits I/O to or from target.
  B. A disk that submits data to cache for availability.
  C. A switch port that provides SAN connectivity.
  D. A front-end storage port that checks for SAN connectivity.
  A. A host that requests or submits I/O to or from target.