NetApp NS0-509 Online Practice Questions and Exam Preparation

NetApp NS0-509 Online Questions & Answers

• Question 21:

  Which two are supported in ONTAP 9.5? (Choose two.)

  A. an NVMe LIF and an FC LIF in the same SVM
  B. an NVMe LIF associated with an FC Direct Connect port
  C. an NVMe LIF and an FC LIF associated with the same port
  D. multiple NVMe LIFs in the same SVM
  C. an NVMe LIF and an FC LIF associated with the same port
  D. multiple NVMe LIFs in the same SVM

• Question 22:

  An administrator configures NVMe within an SVM for a test environment. The administrator creates an NVMe namespace and an NVMe subsystem. The administrator then maps the namespace to the subsystem. However, when the administrator establishes a connection to a supported host, the following error message appears: No discovery log entries to fetch.

  What is the solution to this error?

  A. Add the host WWPN to the subsystem.
  B. Disable the host HBA and re-enable it to clear the buffers.
  C. Add the host NQN to the subsystem.
  D. Use the nvme ns-rescan /dev/nvme0 command to rescan the bus.
  C. Add the host NQN to the subsystem.

• Question 23:

  A customer wants to use both Cisco FC and FCoE switches in their ONTAP environment. According to NetApp best practices, what are two requirements in this scenario? (Choose two.)

  A. You must use single initiator zoning.
  B. You must create interface groups to isolate FC and FCoE LIFs.
  C. You must create a trunk with multiple virtual LANs.
  D. You must not have more than one target UF for the same physical port in a single fabric zone.
  A. You must use single initiator zoning.
  D. You must not have more than one target UF for the same physical port in a single fabric zone.

• Question 24:

  You currently have a FAS8200 with ONTAP 9.5. You want to expand the front end FC I/O capabilities. However, you are unsure which target adapters are supported. What would you use to confirm which adapters are supported with your current configuration?

  A. Hardware Universe (HWU)
  B. Upgrade Advisor
  C. OneCollect
  D. Interoperability Matrix Tool (IMT)
  A. Hardware Universe (HWU)

• Question 25:

  Which tool collects configuration data from hosts and switches to assist in evaluating a qualified configuration?

  A. System Manager
  B. sysstat. command
  C. SnapCenter
  D. OneCollect
  D. OneCollect

• Question 26:

  Click the Exhibit button.

  

  You are asked to serve iSCSI LUNs in an existing SVM on your AFF A220 using ONTAP 9.5. You verified that the iSCSI license is configured on your cluster and that the iSCSI protocol is enabled. Referring to the exhibit, what is needed to allow hosts to log into the iSCSI target?

  A. Create new LIFs with the iSCSI data protocol.
  B. Create new igroups with the host IQNs.
  C. Add iSCSI to the data protocol of the existing LIFs.
  D. Map LUNs to the igroups.
  D. Map LUNs to the igroups.

• Question 27:

  Exhibit.

  

  You are working on a project to install a new AFF A300 storage array. You use a pair of Nexus 3596 switches for FC connectivity between your VMware ESXi servers and the AFF A300. Which SAN switch feature must be enabled to accomplish this task?

  A. N_Port ID visualization (NP1V)
  B. Open Shortest Path First (OSPF)
  C. Link Aggregation Control Protocol (LACP)
  D. N_Port Visualization (NPV)
  A. N_Port ID visualization (NP1V)

• Question 28:

  Click the Exhibit button.

  

  An administrator is trying to configure a multiple-hop Cisco MDS switch and is receiving the error shown in the exhibit. In this scenario, which action will solve this problem?

  A. Configure the physical link of interface ext17 as an F_Port.
  B. Configure the external interface to a different virtual SAN (VSAN) on both ends.
  C. Connect the external link to a Cisco MDS switch.
  D. Turn N_Port ID virtualization (NPIV) off.
  C. Connect the external link to a Cisco MDS switch.

• Question 29:

  You are planning to implement a 32 Gb FC SAN on a 2-node AFF A700 ONTAP 9.5 cluster. You need to create 112 FC LIFs across the HA pair with a limit of 20 FC LIFs per physical HBA port. In this scenario, how many 2-port 32 Gb HBA cards do you need per storage controller?

  A. 2
  B. 1
  C. 4
  D. 3
  A. 2

• Question 30:

  Changes to your organization requires access to an SVM be given to a group of individuals. Your company uses Active Directory as a method of access control. You decide to use the security login create -vserver engCluster - user-or-groupname CORP\Admins -application ssh -authmethod domain -role vsadmin command.

  In this scenario, which access rights will this command grant?

  A. read only rights to the SVM engCluster for Active Directory group CORP
  B. vsadmin rights to the SVM engCluster for Active Directory group CORP\Admins
  C. vsadmin rights to the SVM CORP for Active Directory group CORP\Admins
  D. vsadmin rights to the SVM engCluster for Active Directory group CORP
  B. vsadmin rights to the SVM engCluster for Active Directory group CORP\Admins