NetApp NS0-191 Online Practice Questions and Exam Preparation

NetApp NS0-191 Online Questions & Answers

• Question 1:

  Click the Exhibit tab.

  

  

  A customer receives the AutoSupport messages shown below. "[?] Sat Aug 23 13:00:27 PDT [hostname: env_mgr: callhome.c.fan.fru.fault:error]: Call home for CHASSIS FAN FRU FAILED: SysFan3 F2

  ...

  [?] Sat Aug 23 13:00:32 PDT [hostname: env_mgr: monitor.chassisFan.ok:notice]: Chassis fan Sysfan3 F2 is ok"

  The output of the sysconfig -a command is shown in the exhibit.

  In this scenario, what would you do to solve this problem?

  A. Update Data ONTAP to 8.1.4 at the latest patch level.
  B. Update the Service Processor firmware.
  C. Replace the fan.
  D. Disconnect the controller from the mains, wait two minutes, and re-connect it in the next maintenance window.
  B. Update the Service Processor firmware.

• Question 2:

  You replaced the controller of an HA pair in a 4-node cluster running clustered Data ONTAP 8.3.1. You have gone through all hardware testing requirements before booting the system. Which action is now required to boot the system successfully?

  A. Use theboot_ontapcommand from the loader prompt.
  B. Use thediskreassign -s -d command from maintenance mode.
  C. Use thestorage diskreassign -s -d command from the cluster shell.
  D. Use thestorage diskreassign -s -d command from diagnostics mode.
  A. Use theboot_ontapcommand from the loader prompt.

• Question 3:

  A user on an NFSv4 client is listing a directory and sees the file in an ls -1 listing shown below.

  "-rw-r----- 1 nobody nobody 10767 Mar 24 2016 party.txt"

  The customer would like to know why the user and group shows as "nobody".

  Which statement would explain why this is happening?

  A. The permissions does not allow for listingthe owner.
  B. There is an NFSv4 ID domain mismatch.
  C. There is no owner or group set on the file.
  D. The file resides on an NTFS style volume.
  A. The permissions does not allow for listingthe owner.

• Question 4:

  A customer recently had a controller module failure on a FAS62xx system running clustered Data ONTAP 8.3.1. The controller module had been replaced last night and everything is working well but the customer noticed warnings concerning licensing on the console. The warnings say there is a grace period of 89 days remaining.

  In this scenario, what should be done to solve this problem?

  A. Execute a system restore to recover the previous license keys, and then apply to the new controller module.
  B. Apply the previously used license keys using the appropriate commands.
  C. Collect the new license keys from the new controller module packaging and install them using the appropriate commands.
  D. Obtain new 8.2x format license keys and install them using the appropriate commands.
  D. Obtain new 8.2x format license keys and install them using the appropriate commands.

• Question 5:

  A user complains that they cannot access a new NFS mount while logged into their Linux client. They are unable to mount the file system and are receiving an access denied error. The NFS server is a clustered Data ONTAP 8.3.1 storage virtual machine (SVM). Which two steps should be taken to troubleshoot the problem? (Choose two.)

  A. Verify that the access settings of the export policy's rule are applicable to the export.
  B. Confirm that the NFS mount's underlying volume is set to the NTFS security style.
  C. Execute thevserver nfs showcommand on the clustered Data ONTAP cluster shell.
  D. Execute the mount command on the client to determine how NFS mounts are mounted.
  A. Verify that the access settings of the export policy's rule are applicable to the export.
  D. Execute the mount command on the client to determine how NFS mounts are mounted.

• Question 6:

  A customer mentions that their Windows users cannot access clustered Data ONTAP 8.3.1 CIFS shares. The users see "access denied" on the Windows side. Host name resolution is working and properly resolves IP to host name and host name to IP and the customer can ping using host name and IP.

  In this scenario, which statement describes the problem?

  A. iSCSI has been enabled on the SVM.
  B. The time on the controller is skewed by more than five minutes.
  C. NTP is not enabled on the clustered Data ONTAP 8.3.1 cluster.
  D. There is no proper route to the storage virtual machine (SVM) running the CIFS server.
  C. NTP is not enabled on the clustered Data ONTAP 8.3.1 cluster.

• Question 7:

  Click the Exhibit tab.

  

  A customer is attempting to protect the source volume listed in the exhibit. They try to initialize a DP mirror relationship to the destination volume but it will not initialize as expected. Which two settings on the destination volume are causing this problem? (Choose two.)

  A. language
  B. type
  C. volume size
  D. max-autosize
  B. type
  D. max-autosize

• Question 8:

  Click the Exhibit tab.

  

  The customer configured an SVM called "NewSVM" for NFS, configured the volume, "vol_nfs", mounted at "/vol_nfs", and set up NFSv3 as shown in the exhibit. However, if they try to mount from the client with IP address 192.168.10.10, they receive a "permission denied" error.

  In this scenario, which action will solve the error condition?

  A. Add a rule to the defaultexport policy to include the-clientmatch 192.168.10.0/24parameter.
  B. Stop and start NewSVM.
  C. Associate a correct export policy to the root volume (/) of NewSVM.
  D. Configure the default route for NewSVM correctly.
  B. Stop and start NewSVM.

• Question 9:

  When troubleshooting the delivery failure of an AutoSupport notification, you enter the autosupport history show command. In this scenario, what information would you expect the command output to show? (Choose two.)

  A. time of the last upgrade
  B. status of the delivery
  C. size of the AutoSupport notification
  D. IP address of the destination
  B. status of the delivery
  D. IP address of the destination

• Question 10:

  After a storage administrator turned off IP fast path, all the NFS clients lost connectivity to the storage controller. Which statement describes what happened in this scenario?

  A. The NFS clients are using NFS over UDP.
  B. All clients are in the local broadcast domain.
  C. The ARP cache is flushed when IP fast path disabled.
  D. No default gateway is configured.
  A. The NFS clients are using NFS over UDP.