NetApp NS0-183 Online Practice Questions and Exam Preparation

NetApp NS0-183 Online Questions & Answers

• Question 51:

  You installed a new pair of Cisco 92300YC cluster switches at a customer's site. Before you install any files on the switch, you want to view the current configuration. In this scenario, which command would you use to accomplish this task?

  A. switchcfgshow
  B. fabricshow
  C. config show
  D. show running-config
  A. switchcfgshow

• Question 52:

  You are installing a new AFF A400 cluster and need to access the cluster management LIF from a remote subnet with the fully qualified domain name (FQDN) a400.lab.netapp.com. In this scenario, which two network components must be configured to log in to ONTAP System Manager from the remote subnet? (Choose two.)

  A. route
  B. NTP
  C. DNS
  D. VLAN
  A. route
  C. DNS

• Question 53:

  You must replace a FAS2750 switchless cluster with an AFF A220 switchless cluster for a customer. The customer requires that you transfer the data from the FAS2750 cluster to the AFF A220. In this scenario, which two methods would you use to migrate the customer's data? (Choose two.)

  A. Establish an SVM-DR relationship between the two clusters and activate the destination SVM.
  B. Remove all of the HDD drives from the FAS cluster and install them into the AFF cluster.
  C. Install SAS cables between the two clusters and use the vol move command.
  D. Provide cluster switches and build a 4-node cluster, then use the vol move command.
  C. Install SAS cables between the two clusters and use the vol move command.
  D. Provide cluster switches and build a 4-node cluster, then use the vol move command.

• Question 54:

  You install a 4-node cluster with an AFF A400 HA pair and a FAS8300 HA pair. After setup, you are asked to review the audit logs on each controller from a Web browser. In this scenario, which method provides access to the logs from a Web browser?

  A. ACP
  B. ADP
  C. DNS
  D. SPI
  D. SPI

• Question 55:

  You need to install a cluster with a FAS2720 HA pair and a FAS8300 HA pair.

  Which NetApp tool will verify which cluster interconnect switches support this configuration?

  A. Active IQ Config Advisor
  B. Interoperability Matrix Tool (IMT)
  C. Hardware Universe (HWU)
  D. mysupport.netapp.com site
  C. Hardware Universe (HWU)

• Question 56:

  Before starting a base installation on an AFF A400, you need to find out the default cluster interconnect ports for the AFF A400 controllers. In this scenario, which three resources would you use to find this information? (Choose three.)

  A. Hardware Universe (HWU)
  B. Interoperability Matrix Tool (IMT)
  C. hardware installation setup poster
  D. AFF FAS Documentation Center
  E. Active IQ Unified Manager
  A. Hardware Universe (HWU)
  C. hardware installation setup poster
  D. AFF FAS Documentation Center

• Question 57:

  Click the Exhibit button.

  

  You are reviewing the setup of a recently installed FAS9000 switched cluster. As shown in the exhibit, the cluster interconnects are connected to a pair of Cisco Nexus 3132Q-V 40 Gb ports. For a high availability, which ports should swap Ethernet cables?

  A. Swap node1:e8a and node2:e4a.
  B. Swap node1:e4a and node1:e8a.
  C. Swap node2:e4a and node2:e8a.
  D. Swap node1:e4a and node2:e4b.
  C. Swap node2:e4a and node2:e8a.

• Question 58:

  A customer has a current AFF ASA A700 cluster and they want to expand the cluster by adding a second AFF ASA A700 HA pair. In this scenario, which step would be required to accomplish this task?

  A. Install a BES-53248 cluster switch and convert the AFF ASA A700 from a switchless to switch cluster.
  B. Enable ALUA between the two HA pairs to allow cluster backend traffic.
  C. The customer will need to create a separate cluster for the second AFF ASA A700 pair.
  D. Install a Brocade FC switch and create zoning between the original cluster and the new cluster.
  A. Install a BES-53248 cluster switch and convert the AFF ASA A700 from a switchless to switch cluster.

• Question 59:

  What is the default shelf ID for disk shelves with IOM12 modules?

  A. 12
  B. 01
  C. 10
  D. 00
  D. 00

• Question 60:

  Which two SVMs are automatically created during the cluster setup? (Choose two.)

  A. admin SVM
  B. system SVM
  C. node SVM
  D. data SVM
  A. admin SVM
  B. system SVM