NetApp NS0-175 Online Practice Questions and Exam Preparation

NetApp NS0-175 Online Questions & Answers

• Question 41:

  A customer wants to replace their Cisco UCS 6248UP with the current Cisco UCS 6454. They are currently using six 16 Gbit uplinks per Fabric Interconnect for FC and do not want to change the speed and number of ports used. In this scenario, what is the minimum number of unified ports that must be configured for FC for a comparable configuration?

  A. 8
  B. 6
  C. 16
  D. 12
  A. 8

• Question 42:

  A customer wants to deploy a FlexPod Datacenter solution in a limited amount of rack space. After planning for the networking and storage devices required for the deployment, they realize they have six rack units of space remaining. They need to install as many servers as possible in this available rack space.

  In this scenario, which solution allows them to accomplish their objective?

  A. three Cisco UCS C4200 rack servers
  B. four Cisco UCS B480 M blade servers
  C. six Cisco UCS C220 M5 rack servers
  D. eight Cisco UCS B200 M5 blade servers
  D. eight Cisco UCS B200 M5 blade servers

• Question 43:

  Your customer wants to change from local boot to SAN boot for the compute layer. What must be present on the network layer to meet the customer's design change?

  A. NFS
  B. CIFS
  C. IQN
  D. FC
  D. FC

• Question 44:

  Which Cisco UCS Fabric Interconnect model has multiple 100 Gbps ports available for use?

  A. Cisco UCS 6332
  B. Cisco UCS 6324
  C. Cisco UCS 6454
  D. Cisco UCS 6332-16UP
  C. Cisco UCS 6454

• Question 45:

  An administrator wants to ensure secure authentication while accessing a NetApp ONTAP system. In this scenario, which two access methods should be used? (Choose two.)

  A. RSH
  B. SSH
  C. HTTPS
  D. HTTP
  A. RSH
  B. SSH

• Question 46:

  You want to ass a customer's NetApp storage controllers into their Cisco Intersight management portal. In this scenario, which IP address would you choose to add?

  A. NetApp SVM management IP address
  B. NetApp Active IQ Unified Manager IP address
  C. NetApp cluster IP address
  D. NetApp Virtual Storage Console IP address
  B. NetApp Active IQ Unified Manager IP address

• Question 47:

  A customer has decided to deploy Red Hat OpenShift on a FlexPod solution, based in a published Cisco Validated Design. The customer intends to use the NetApp Trident to attach persistent storage to the customer's containers from the customer's NetApp AFF controllers.

  In this scenario, which two storage protocols are supported? (Choose two.)

  A. iSCSI
  B. FC
  C. NFS
  D. SMB
  B. FC
  C. NFS

• Question 48:

  A customer with a FlexPod Datacenter solution wants to enable user access on UCS Manager. In this scenario, which three authentication methods would be configured? (Choose three.)

  A. NetBIOS
  B. LDAP
  C. Local
  D. Active Directory
  E. Workgroup
  A. NetBIOS
  C. Local
  D. Active Directory

• Question 49:

  You have designed a FlexPod configuration with VXLAN configured on Cisco Nexus 9000 Series switches operating in NX-OS mode. Which two statements are true in this scenario? (Choose two.)

  A. VXLAN segments are independent of the underlying network topology
  B. VXLAN is supported only on Cisco MDS 9000 Series switches
  C. VXLAN supports the Spanning Tree Protocol for loop prevention
  D. VXLAN is a Layer 2 overlay scheme over a Layer 3 network
  C. VXLAN supports the Spanning Tree Protocol for loop prevention
  D. VXLAN is a Layer 2 overlay scheme over a Layer 3 network

• Question 50:

  A customer wants to add 40 Gbps networking capabilities to a FlexPod Datacenter 10 Gbps environment. Which two Cisco components support this speed? (Choose two.)

  A. Cisco Nexus 9504
  B. Cisco UCS 1440 VIC
  C. Cisco Nexus 3550-F
  D. Cisco UCS 1455 VIC
  B. Cisco UCS 1440 VIC
  C. Cisco Nexus 3550-F