CompTIA N10-006 Online Practice Questions and Exam Preparation

CompTIA N10-006 Online Questions & Answers

• Question 871:

  A new threat is hiding traffic by sending TLS-encrypted traffic outbound over random ports. Which of the following technologies would be able to detect and block this traffic?

  A. Intrusion detection system
  B. Application aware firewall
  C. Stateful packet inspection
  D. Stateless packet inspection
  C. Stateful packet inspection

• Question 872:

  Which of the following is the MAXIMUM rated speed for CAT5 cabling?

  A. 10Mbps
  B. 100Mbps
  C. 1000Mbps
  D. 10Gbps
  B. 100Mbps

  ---

  Explanation Explanation/Reference:Category 5 cable (Cat 5) is a twisted pair cable for carrying signals. This type of cable is used in structured cabling for computer networks such as Ethernet. The cable standard provides performance of up to 100 MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), and 1000BASE-T (Gigabit Ethernet)

• Question 873:

  Kim, a network administrator, should consult which documentation sources FIRST to determine the cause of recent network issues?

  A. Network map
  B. Cable management
  C. Change management
  D. Asset management
  C. Change management

• Question 874:

  A small company is looking to install a wireless network to enable its relatively old fleet of laptops to have limited internet access internally. The technician on the project knows that the units do not support modern encryption standards. If backwards compatibility is the greatest concern, which of the following is the MOST appropriate wireless security type to choose?

  A. WEP
  B. WPS
  C. WPA
  D. WPA2
  A. WEP

  ---

  Explanation

• Question 875:

  Ann, a new user, has a workstation that has connectivity to the printer located in her department, but cannot access the Internet. The result of an ipconfig command on Ann's workstation is as follows:

  IP address: 192.168.0.124 Subnet Mask: 255.255.255.128 Default Gateway: 192.168.0.254

  Which is MOST likely preventing the user from accessing the Internet?

  A. Duplicate IP address
  B. Incorrect gateway
  C. Incorrect VLAN
  D. Bad switch port
  B. Incorrect gateway

  ---

  Explanation Explanation/Reference:We usually give default gateway as an end device which is directly connected with ISP so in this case user has lost his connectivity with due to wrong default gateway configured.

• Question 876:

  The cost of installing fiber cable in a factory environment is too high. Which of the following cables should be used to minimize the effect of EMI?

  A. CAT6
  B. UTP
  C. Coaxial
  D. Crossover
  C. Coaxial

• Question 877:

  Some visitors are unable to access the wireless network. The network's wireless infrastructure is comprised of three different buildings with the configurations listed below. Wireless network in Building A and C is used exclusively for internal employees and Building B is used for visitors and requires no additional configuration on their devices. Which of the following settings would need to be modified to provide wireless access to all visitors?

  Building A Building B Building C Channel: 2 Channel: 6 Channel: 11 Encryption: WPA2 Encryption: WPA2 Encryption: WPA2

  A. Encryption set to Open in all Buildings
  B. Encryption set to Open in Building B
  C. Encryption set to WEP in Building B
  D. Channel set to 11 in Building B
  B. Encryption set to Open in Building B

  ---

  Because the building B is in the middle, the wireless access router will have reachability to the building A and C. Now, the only thing that we need to do is to open the Wireless access on B for the guest users for the WAP in B so that the users coming to building A and C can get access to internet using the open connection.

• Question 878:

  A company is moving into a larger office space. A site survey is performed, a network layout is created, and access points are placed throughout the building.

  Which of the following steps should the network technician take NEXT to ensure blanket wireless coverage?

  A. Create a heat map and adjust access points.
  B. Broadcast the SSID to connect all devices.
  C. Replace all antennas with omni-directional types.
  D. Configure 5GHz dual channel broadcasting.
  B. Broadcast the SSID to connect all devices.

• Question 879:

  A network administrator needs to implement a monitoring tool and be able to send log information to a server and receive log information from other clients. Which of the following should be implemented? (Select TWO).

  A. SNMP
  B. Network sniffer
  C. Syslog
  D. System log
  E. History log
  A. SNMP
  C. Syslog

  ---

  Explanation Explanation/Reference:Simple Network Management Protocol (SNMP) is an "Internet-standard protocol for managing devices on IP networks". Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks and more. It is used mostly in network management systems to monitor network- attached devices for conditions that warrant administrative attention. Syslog is a standard for computer message logging. It permits separation of the software that generates messages from the system that stores them and the software that reports and analyzes them.

• Question 880:

  Which of the following wiring distribution types, often found in company closets, is used to connect wiring from individual offices to the main LAN cabling?

  A. MDF
  B. 66 block
  C. IDF
  D. Patch panel
  D. Patch panel

  ---

  Explanation Explanation/Reference:A patch panel, patch bay, patch field or jack field is a number of circuits, usually of the same or similar type, which appear on jacks for monitoring, interconnecting, and testing circuits in a convenient, flexible manner.