CompTIA N10-006 Online Practice Questions and Exam Preparation

CompTIA N10-006 Online Questions & Answers

• Question 361:

  A technician replaces a failed router with a spare that has been in inventory for some time. After attempting to enable HTTPS on the spare router, the technician discovers the feature is unavailable. The support office was able to connect to the previous router. Which of the following actions should the technician perform to enable HTTPS access for the support team?

  A. Reboot the router.
  B. Enable HTTP on the router.
  C. Update the firmware of the spare router.
  D. Perform a factory reset on the router.
  C. Update the firmware of the spare router.

• Question 362:

  Zach, a technician, is checking newly installed CAT5e cabling, and suspects that some of the ends were not properly terminated. Which of the following tools will verify this?

  A. Cable tester
  B. Toner probe
  C. OTDR
  D. Loopback plug
  A. Cable tester

• Question 363:

  Which of the following protocols is used to encapsulate other network layer protocols such as multicast and IPX over WAN connections?

  A. MPLS
  B. ESP
  C. GRE
  D. PPP
  C. GRE

• Question 364:

  Coverage analysis for a new implementation of 802.11n WLAN involves which of the following? (Select TWO)

  A. Humidity
  B. Temperature
  C. Heatmap
  D. Building material
  E. Sight lines
  D. Building material
  E. Sight lines

• Question 365:

  Which of the following standards can operate at 40MHz channel spacing?

  A. 802.11a
  B. 802.11b
  C. 802.11g
  D. 802.11n
  D. 802.11n

• Question 366:

  At which of the following locations does the responsibility of a Telco provider cease?

  A. IDF
  B. CSU
  C. Demarc
  D. MDF
  C. Demarc

• Question 367:

  A network administrator notices that all of the company switches are running at capacity on a given day, which is abnormal according to network baselines taken recently. Which tool would BEST allow the administrator to inspect what type of traffic is on the network?

  A. Wire tap
  B. Network sniffer
  C. Load balancing appliance
  D. NIPS
  B. Network sniffer

• Question 368:

  A company has added several new employees, which has caused the network traffic to increase by 200%. The network traffic increase from the new employees was only expected to be 20% to 30%. The administration suspects that the network may have been compromised. Which of the following should the network administrator have done previously to minimize the possibility of a network breach?

  A. Create VLANs to segment the network traffic
  B. Place a network sniffer on segments with newemployees
  C. Provide end user awareness and training for employees
  D. Ensure best practices were implemented when creating new user accounts
  C. Provide end user awareness and training for employees

• Question 369:

  A network administrator is tasked with building a wireless network in a new adjacent building. Wireless clients should not have visibility to one another but should have visibility to the wired users. Users must seamlessly migrate between the two buildings while maintaining a connection to the LAN. Which of the following is the BEST way to configure the new wireless network in the new building?

  A. Use the same SSIDs on different channels and AP isolation
  B. Use different SSIDs on different channels and VLANs
  C. Use different SSIDs on the samechannels with VLANs
  D. Use the same SSIDs on same channels with AP isolation
  A. Use the same SSIDs on different channels and AP isolation

• Question 370:

  A technician has verified that a recent loss of network connectivity to multiple workstations is due to a bad CAT5 cable in the server room wall. Which of the following tools can be used to locate its physical location within the wall?

  A. Cable certifier
  B. Multimeter
  C. Cable tester
  D. Toner probe
  D. Toner probe

  ---

  Toner probes are specifically used to trace cables hidden in floors, ceilings, or walls. They can alsobe used to track cables from the patch panels to their destinations.