CompTIA N10-006 Online Practice Questions and Exam Preparation

CompTIA N10-006 Online Questions & Answers

• Question 291:

  Which of the following Ethernet features will allow increased FCoE network throughput as long as all network devices recognize its specific size?

  A. Frame relay
  B. TCP offloading
  C. Jumbo frame
  D. Quality of service
  E. Equal cost multipath
  C. Jumbo frame

• Question 292:

  A user is getting very weak signals while trying to connect to the wireless. Which of the following should the user do to help with signal strength?

  A. Call the wireless provider and ask for a T3 circuit.
  B. Move the wireless router to a better location where line of sight is obtained.
  C. Reinstall the operating system to the PC to ensure the newest patches are installed.
  D. Install a hub to ensure there is a clear path for the cables to run.
  B. Move the wireless router to a better location where line of sight is obtained.

• Question 293:

  A technician receives a report that a user's workstation is experiencing no network connectivity. The technician investigates and notices the patch cable running from the back of the user's VoIP phone is routed directly under the rolling chair and has been smashes flat over time. Which of the following is the most likely cause of this issue?

  A. Cross-talk
  B. Electromagnetic interference
  C. Excessive collisions
  D. Split pairs
  C. Excessive collisions

• Question 294:

  DRAG DROP Build a T-658B Connection

  Select and Place:

  

  

• Question 295:

  A company technician has set up the network so that all external protections and internal protections across the network are segregated from any malicious attacks and there are firewalls configured on both sides of the DMZ. During the configuration review of the device installation, there is evidence of unauthorized network traffic penetrating the internal network. Which of the following is either missing or incorrectly configured in the firewall settings?

  A. Stateful settings
  B. UTM
  C. ACL
  D. Implicit deny
  E. Stateless settings
  A. Stateful settings

• Question 296:

  Which of the following tools can the technician use to analyze TCP/IP packets when trying to determine a connection problem within a subnet?

  A. Wire mapper
  B. Protocol analyzer
  C. Cable tester
  D. SYSLOG server
  B. Protocol analyzer

• Question 297:

  Which of the following is the default subnet mask for a Class B address?

  A. 255.0.0.0
  B. 255.255.0.0
  C. 255.255.255.0
  D. 255.255.255.255
  B. 255.255.0.0

• Question 298:

  Lisa, a consultant, is inspecting an office that reports frequent wireless issues. Upon scanning the network broadcasting in the vicinity of the office, seven SSIDs are found. The company's Wi-Fi network and three others all share channel six. Which of the following is MOST likely causing the issue?

  A. Frequency interference
  B. Low signal strength
  C. Standard mismatch
  D. Incorrect channel
  A. Frequency interference

• Question 299:

  Standards such as JPEG and ASCII operate at which of the following OSI model layers?

  A. Presentation
  B. Data link
  C. Session
  D. Application
  A. Presentation

• Question 300:

  A technician needs to test the length of a newly installed cable run because it is believed that it exceeds the maximum specification length. Which of the following tools should be used?

  A. Cable certifier
  B. Toner probe
  C. Cable tester
  D. Protocol analyzer
  A. Cable certifier