CompTIA N10-006 Online Practice Questions and Exam Preparation

CompTIA N10-006 Online Questions & Answers

• Question 1361:

  A customer wishes to network several computers throughout a large warehouse containing numerous metal shelves and concrete walls. The computers are at least 175 meters (574 feet) apart. Which of the following media types should be recommended for the customer using only a single switch?

  A. Fiber optic
  B. Wireless
  C. CAT5e
  D. CAT3
  A. Fiber optic

• Question 1362:

  SIMULATION You have been tasked with setting up a wireless network in an office. The network will consist of 3 access points and a single switch. The network must meet the following parameters. The SSIDs need to be configured as corpnet with a key of S3cr3t! The wireless signals should not interfere with each other The subnet the Access points and Switch are on should only support 30 devices maximum The access Points should be configured to only support TKIP clients at a maximum speed Instructions: Click on the devices to review their information and adjust the setting of the APs to meet the given requirements.

  

  Correct Answer. Check the answer below:
  Check the answer below:

  ---

  This simulation is still under construction. On the first exhibit, the layout should be as follows Access Point Name AP1 IP Address 192.168.1.3 Gateway 192.168.1.2 SSID corpnet SSID Broadcast yes Mode G Channel 1 Speed Auto Duplex Auto WPA Passphrase S3cr3t! Exhibit 2 as follows Access Point Name AP2 IP Address 192.168.1.4 Gateway 192.168.1.2 SSID corpnet SSID Broadcast yes Mode G Channel 6 Speed Auto Duplex Auto WPA Passphrase S3cr3t! Exhibit 3 as follows Access Point Name AP3 IP Address 192.168.1.5 Gateway 192.168.1.2 SSID corpnet SSID Broadcast yes Mode G Channel 11 Speed Auto Duplex Auto WPA Passphrase S3cr3t!

• Question 1363:

  Users connecting to an SSID appear to be unable to authenticate to the captive portal. Which of the following is the cause of this issue?

  A. WPA2 security key
  B. SSL certificates
  C. CSMA/CA
  D. RADIUS
  D. RADIUS

• Question 1364:

  A company has multiple WAPs within close proximity to each other to allow users to move about seamlessly through the building with their laptops, without losing any connection. However, this has had the opposite effect, causing any user that is close to two of the access points to constantly reconnect to the wireless network. Which of the following should be changed on all the WAPs to allow this to work as the customer intended?

  A. Change the SSID to be unique for each WAP.
  B. Change the antenna direction to be unique for each WAP.
  C. Change the encryption method to be unique for each WAP.
  D. Change the channel to be unique for each WAP.
  D. Change the channel to be unique for each WAP.

• Question 1365:

  A user is unable to access any network resources. The IP configuration of the workstation is as follows:

  IP Address: 192.168.10.32 Subnet Mask: 255.255.255.240 Default Gateway: 192.168.10.46

  Which of the following would allow the user to connect to network resources?

  A. Change the default gateway to 192.168.10.1
  B. Change the default gateway to 192.168.10.254
  C. Change the IP address to 192.168.10.31
  D. Change the IP address to 192.168.10.33
  D. Change the IP address to 192.168.10.33

  ---

  The given ip address is network id which we don't assign to the host so the next ip is applicable to this.

• Question 1366:

  A technician would like to track the improvement of the network infrastructure after upgrades. Which of the following should the technician implement to have an accurate comparison?

  A. Regression test
  B. Speed test
  C. Baseline
  D. Statement of work
  C. Baseline

  ---

  In networking, baseline can refer to the standard level of performance ofa certain device or to the normal operating capacity for your whole network. High-quality documentation should include a baseline for network performance, because you and your client need to know what "normal" looks like in order to detect problems beforethey develop into disasters. A network baseline delimits the amount of available bandwidth available and when. For networks and networked devices, baselines include information about four key components: Processor Memory Hard-disk (or other storage) subsystem Network adapter or subsystem

• Question 1367:

  Which of the following has the LEAST amount of collisions in a domain?

  A. Bridge
  B. Hub
  C. Repeater
  D. Switch
  D. Switch

• Question 1368:

  Which of the following wireless standards provide speeds up to 150Mbps?

  A. 802.11a
  B. 802.11b
  C. 802.11g
  D. 802.11n
  D. 802.11n

  ---

  802.11n builds upon previous 802.11 standards by adding multiple-input multiple- output (MIMO). The additional transmitter and receiver antennas allow for increased data throughput through spatial multiplexing and increased range by exploiting the spatial diversity through coding schemes like Alamouti coding. The speed is 150 Mbit/s (even 250 Mbit/s in PHY level)

• Question 1369:

  Users are reporting a large decrease in network performance. After further investigation, the network administrator notices large amounts of traffic coming from a specific IP address. The network administrator needs to identify the payload of the network traffic. Which of the following could be used to collect that information?

  A. ipconfig
  B. ping
  C. sniffer
  D. route
  C. sniffer

• Question 1370:

  Which of the following is an advantage of dynamic routing?

  A. It can reroute connectivity in the event of failure.
  B. It is the simplest form of routing.
  C. The routes do not change.
  D. The setup and configuration are done manually.
  A. It can reroute connectivity in the event of failure.