CompTIA N10-006 Online Practice Questions and Exam Preparation

CompTIA N10-006 Online Questions & Answers

• Question 1211:

  Kim, a technician, needs to locate a cable in an unorganized wiring closet. Which of the following tools will help her locate the cable?

  A. Protocol analyzer
  B. Cable tester
  C. Toner probe
  D. Punch down tool
  C. Toner probe

• Question 1212:

  A network administrator opens up the RDP port to access network resources from home. Several months later, the administrator's account is getting locked out constantly. After closing the port, which of the following should be used to identify the source of the attack?

  A. Network maps
  B. Change management
  C. Log analysis
  D. Protocol analyzer
  C. Log analysis

• Question 1213:

  A technician has two wireless 802.11g APs. One is set to channel 1 and the other channel 6. The APs appear to interfere with each other. Which of the following is MOST likely the reason?

  A. Channels below 9 overlap each other
  B. Channel width is set to 40MHz
  C. Channels are in the 5GHz range by mistake
  D. Channel 1 should have been set to 11 to avoid an overlap
  B. Channel width is set to 40MHz

• Question 1214:

  Users report they are receiving an unusual amount of suspicious email from the network administrator. Which of the following is the cause of this security issue?

  A. Ping of death
  B. DDoS attack
  C. Jamming
  D. Malware
  B. DDoS attack

• Question 1215:

  An administrator wants to restrict traffic to FTP sites regardless of which PC the request comes from. Which of the following would BEST accomplish this?

  A. An IP filtering ACL
  B. A MAC filtering ACL
  C. A port filtering ACL
  D. A class matching ACL
  C. A port filtering ACL

• Question 1216:

  A technician wants to securely manage several remote network devices. Which of the following should be implemented to securely manage the devices?

  A. WPA2
  B. IPv6
  C. SNMPv3
  D. RIPv2
  C. SNMPv3

  ---

  To manage the remote network devices we need to use a network management protocol. SNMP has become the de facto standard of network management protocols. The security weaknesses of SNMPv1 and SNMPv2c are addressed inSNMPv3.

• Question 1217:

  Which of the following would a network administrator recommend to satisfy fault tolerance needs within the datacenter?

  A. Multimode fiber
  B. Setting up a new hot site
  C. Central KVM system
  D. Central UPS system
  D. Central UPS system

  ---

  Explanation Explanation/Reference:For unintruppted power supply we need ups as from this no power issue will come and our systems will remain safe.

• Question 1218:

  A network administrator is tasked with blocking unwanted spam which is being relayed by an internal email server. Which of the following is the FIRST step in preventing spam that is originating from bots on the network?

  A. Closing off port 25 on the firewall
  B. Closing off port 53 on the firewall
  C. Turning off the SMTP service on the email server
  D. Turning off the IMAP service on the email server
  A. Closing off port 25 on the firewall

• Question 1219:

  A technician is tasked with adding an ACL to the host-based firewall of a PC. The ACL should allow the Development Server to only connect to the PC's HTTP server on the default port. Given the IP addresses below, which of the following ACLs would accomplish this goal? Development Server: 192.168.1.100 PC.

  A. Source. 192.168.1.100; Source Port: Any; Destination: 192.168.3.3; Destination Port:80; Action: Permit
  B. Source. 192.168.1.100; Source Port:80; Destination: 192.168.3.3; Destination Port:80; Action: Permit
  C. Source. 192.168.3.3; Source Port:80; Destination: 192.168.1.100; Destination Port: Any; Action: Permit
  D. Source. 192.168.3.3; Source Port:80; Destination: 192.168.1.100; Destination Port:80; Action: Permit
  E. Source. 192.168.1.100; Source Port: Any; Destination: 192.168.3.3; Destination Port: Any; Action: Permit
  A. Source. 192.168.1.100; Source Port: Any; Destination: 192.168.3.3; Destination Port:80; Action: Permit

• Question 1220:

  A new employee was given the following information to connect to the corporate wireless network for the first time:

  SSID: CorporateWiFi

  Encryption: WPA2

  Password: SuperSecret!

  The user enters the correct SSID and notices that encryption type or password are not required when configuring the laptop in the office, and the laptop successfully connects to the Internet. When the user brings the laptop to the conference room, a pop-up asks for the CorporateWiFi password. Which of the following is the MOST likely cause of this behavior?

  A. The laptop wireless network card is incompatible with the conference room WAP.
  B. The office walls prevent the employee from making a full connection.
  C. A rogue access point was installed by a company employee.
  D. MAC filtering is only enabled in the conference room.
  C. A rogue access point was installed by a company employee.