N10-006 Exam Details

  • Exam Code
    :N10-006
  • Exam Name
    :CompTIA Network+
  • Certification
    :CompTIA Certifications
  • Vendor
    :CompTIA
  • Total Questions
    :1703 Q&As
  • Last Updated
    :Dec 14, 2021

CompTIA N10-006 Online Questions & Answers

  • Question 1121:

    A user is on a network with two upstream connections to the Internet and is experiencing intermittent issues while connecting to websites. Some websites are available but others are not. Which of the following is the MOST likely cause of the condition?

    A. Incorrect VLAN assignment
    B. Bad or missing routes
    C. Switching loop
    D. Wrong subnet mask

  • Question 1122:

    An organization requires a second technician to verify changes before applying them to network devices. When checking the configuration of a network device, a technician determines that a coworker has improperly configured the AS number on the device. This would result in which of the following?

    A. The OSPF not-so-stubby area is misconfigured
    B. Reduced wireless network coverage
    C. Spanning tree ports in flooding mode
    D. BGP routing issues

  • Question 1123:

    The address 6FFE:FFFF:0000:2F3B:04AC:00FF:FEBE:5C4A is an example of which of the following?

    A. APIPA
    B. MAC
    C. IPv4
    D. IPv6

  • Question 1124:

    A company that was previously running on a wired network is performing office-wide upgrades. A department with older desktop PC's that do not have wireless capabilities must be migrated to the new network, ensuring that all computers are operating on a single network. Assuming CAT5e cables are available, which of the following network devices should a network technician use to connect all the devices to the wireless network?

    A. Wireless bridge
    B. VPN concentrator
    C. Default WAP
    D. Wireless router

  • Question 1125:

    Which of the following is an invalid MAC address?

    A. AA:CE:58:FD:90:08
    B. 44:98:3E:F8:33:23
    C. 56:AD:BX:89:55:54
    D. 94:9E:FE:EE:8C:DF

  • Question 1126:

    Two switches are connected using both a CAT6 cable and a CAT5e cable. Which of the following problems is occurring?

    A. Missing route
    B. Autosensing ports
    C. Improper cable types
    D. Switching loop
    E. Media mismatch

  • Question 1127:

    Which of the following tools would a network technician use to troubleshoot a span of single-mode fiber cable?

    A. Punchdown tool
    B. Spectrum analyzer
    C. Ethernet tester
    D. OTDR

  • Question 1128:

    An administrator needs to provide remote connectivity to server1, web traffic to server2, and FTP access to server3 using a single outside IP address. Which of the following would the administrator implement on the firewall to accomplish this?

    A. Port Address Translation
    B. Demilitarized Zone
    C. Stateful Packet Inspection
    D. Network Address Translation

  • Question 1129:

    The IT manager at a small firm is in the process of renegotiating an SLA with the organization's ISP. As part of the agreement, the ISP offers DNS hosting services for no additional cost. The IT manager determines that hosting the organization's DNS records with the ISP carries too much risk for the organization. Which of the following describes how hosting DNS servers internally mitigates security risks associated with allowing the ISP to provide DNS hosting?

    A. It allows the organization to easily switch between ISPs in the future.
    B. It results in improved DNS response times for external customers.
    C. It allows retention of full control over DNS services.
    D. It requires no additional security precautions compared to external hosting.

  • Question 1130:

    An administrator's router with multiple interfaces uses OSPF. When looking at the router's status, it is discovered that one interface is not passing traffic. Given the information below, which of the following would resolve this issue? Output: Fast Ethernet 0 is up, line protocol is down Int ip address is 10.20.130.5/25 MTU 1500 bytes, BW10000 kbit, DLY 100 usec Reliability 255/255, Tx load 1/255, Rx load 1/255 Encapsulation ospf, loopback not set Keep alive 10 Full duplex, 100Mb/s, 100 Base Tx/Fx Received 1052993 broadcasts 0 input errors 0 packets output, 0 bytes 0 output errors, 0 collisions, 0 resets

    A. Set the loopback address
    B. Enable the connecting port
    C. Put the IP address in the right broadcast domain
    D. Replace the line card
    E. Set OSPF to area 0

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only CompTIA exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your N10-006 exam preparations and CompTIA certification application, do not hesitate to visit our Vcedump.com to find your solutions here.