Microsoft MB-330 Online Practice Questions and Exam Preparation

Microsoft MB-330 Online Questions & Answers

• Question 341:

  DRAG DROP

  You are the inventory manager for a distribution center. You are configuring the inventory breakdown for a new center in California.

  You need to set up warehouse locations for the center and configure the prerequisite inventory hierarchy.

  Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

  Select and Place:

  

  

• Question 342:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  A company plans to simplify interactions between purchasing department employees and vendors.

  You need to ensure that employees are redirected to a vendor's online store to select items for inclusion on purchase requisitions.

  Solution: Create a vendor catalog.

  Does the solution meet the goal?

  A. Yes
  B. No
  B. No

  ---

  Explanation

  https://docs.microsoft.com/en-us/dynamics365/supply-chain/procurement/set-up-external-catalog-for-punchout

• Question 343:

  You are setting up safety margins.

  Which unit of measure is used to represent safety margins in planning optimization calculations?

  Select only one answer.

  A. Period
  B. Month
  C. Week
  D. Day
  D. Day

• Question 344:

  A company is implementing Dynamics 365 Supply Chain Management with batch- controlled items.

  The management team wants to ensure that sales margins are calculated based on the cost of the product. Because the company values inventory using FIFO, the cost of the product fluctuates. The product is typically less expensive in the beginning of a sales cycle and becomes more expensive toward the end of the sales cycle. You must ensure that products are sold and that margins are calculated based on the cost of the inventory.

  You need to ensure that the correct costs are assigned.

  What should you configure?

  A. Run the Update expiry date job.
  B. Configure Reserve ordered items.
  C. Enable automatic reservation.
  D. Configure an item model group reservation policy.
  D. Configure an item model group reservation policy.

  ---

  Explanation

  Reserve the same batch for a sales order

  Same batch reservation lets you reserve inventory for a sales order line against a single batch of inventory. For example, a customer who orders wallpaper can request that the whole order be filled from the same batch or lot, to avoid inconsistencies among the rolls. To set up a product to use same batch reservation, the following settings must be active in the item model group, tracking dimension group, and storage dimension group that you assign to the product:

  * Item model groups ?The item model group must have the Same batch selection and Consolidate requirement fields selected in the Reservation field group for inventory policies.

  * Etc.

  https://docs.microsoft.com/en-us/dynamics365/supply-chain/sales-marketing/reserve-same-batch-sales-order

• Question 345:

  HOTSPOT

  A company hires four sales representatives for a region named Midwest.

  You must configure commissions for the sales representatives in the Midwest region.

  The calculations must meet the following requirements:

  1. Calculate commissions for all items sold for customers at a rate of 10 percent of total revenue on a sales order.

  2. Apply commissions for all customers in the Midwest Customer group for commission.

  3. Split commissions equally between the representatives.

  You need to configure a commission calculation that meets these requirements.

  How should you configure the calculation? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  

  

• Question 346:

  DRAG DROP

  A company plans to implement Dynamics 365 Supply Chain Management mobile device connectivity.

  You need to perform a spot cycle count on the mobile device.

  Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

  Select and Place:

  

  

  ---

  https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/warehousing/cycle-counting#perform-a-cycle-count-by-using-a-mobile-device

• Question 347:

  A company uses Dynamics 365 Supply Chain Management and the FIFO valuation method for inventory.

  The company's warehouse experienced a roof leak. The leak caused damage to items in the warehouse. Accounting must know the total cost of inventory that is damaged but does not want the damaged items removed from inventory until they have been inspected.

  You need to meet the requirements of the accounting department.

  Which two features should you use? Each correct answer presents part of the solution.

  NOTE: Each correct selection is worth one point.

  A. Stop item for inventory transactions
  B. Movement journal
  C. Order holds
  D. Location profile
  E. Inventory status
  A. Stop item for inventory transactions
  E. Inventory status

  ---

  Explanation

  E: An inventory status is one of the dimensions in the storage dimension group. Inventory statuses can be categorized as available or unavailable, and you can use the Inventory blocking parameter to block items that have an unavailable inventory status. Items that have a blocked status are considered physical inventory, and they can't be used on a production order, sales order, transfer order, or outbound transaction.

  You can use warehouse items that have either available or unavailable inventory statuses for inbound work. For example, you create an available status that is named Ready, an unavailable status that is named Damaged, and a blocked status that is named Blocked.

  When you create a purchase order for received or returned items, if any items are damaged or broken, you can change the inventory status of those items to Damaged on the purchase order line. After these items are received, the status is automatically set to Blocked.

  A: Blocking items by using inventory status blocking

  You can specify which inventory statuses are blocking statuses by using the Inventory blocking parameter on the Inventory statuses page. You can't use inventory statuses as blocking statuses for production orders, sales orders, transfer orders, outbound transactions, or project integrations. For outbound work, use items that have an available inventory status. If items have a status of Broken, and master planning is run on those items, the items are considered missing, and inventory is automatically replenished.

  https://learn.microsoft.com/en-us/dynamics365/supply-chain/inventory/inventory-statuses

  https://learn.microsoft.com/en-us/dynamics365/supply-chain/inventory/inventory-blocking

• Question 348:

  You make use of planning optimization in Dynamics 365 Supply Chain Management, with automatic firming enabled.

  As a result of certain planned purchase orders not firming according to plan, inventory planners have to process planned purchase orders manually.

  You want to make sure that the planned purchase orders are incorporated in automatic firming.

  You configure the Automatic firming time fence (days).

  Does the action achieve your objective?

  A. Yes, it does
  B. No, it does not
  A. Yes, it does

• Question 349:

  HOTSPOT

  A distribution company implementing Dynamics 365 Supply Chain Management has two warehouses.

  One item is purchased and stocked in only Warehouse1. Occasionally, Warehouse2 this item based on customer demand. When this occurs, an for the item must be automatically created for Wareturse2.

  You need to configure the automation of the order for Warehouse2.

  What should you configure? TO answer, the appropriate options in the answer area.

  

  

  ---

  Box 1: Warehouse1

  Set up warehouses for transfer orders.

  You can use warehouse levels to create a hierarchy that supports transfer orders between warehouses. Based on this setup, master scheduling calculates item requirements at the individual warehouse level and generates planned transfer orders from an assigned source warehouse to fulfill them.

  Click Inventory management > Setup > Inventory breakdown > Warehouses.

  Select the warehouse that you want to refill.

  On the Master planning FastTab, select the Refilling check box.

  In the Main warehouse field, select the warehouse that you want to assign as the refilling warehouse. Master scheduling calculates a transfer requirement for the selected warehouse and generates a planned transfer order from the assigned Main warehouse.

  Note: If you clear the Refilling check box, the selected warehouse is assigned a warehouse level in regard to the Main warehouse, but the Main warehouse is not set up as a refilling warehouse.

  Close the page to apply the new setup.

  Box 2: Transfer

• Question 350:

  A company manufactures and sells speaker boxes. The speaker boxes can be silver or black with a basic or upgraded wiring harness assembly.

  The speaker box must be created in the item master so that the variables for colors and harness type can be assigned at order entry.

  You need to create a new item that supports multiple variables.

  What should you do?

  A. Create a new product. Select predefined variant as the configuration technology.
  B. Create a new product master. Select constraint-based configuration as the configuration technology.
  C. Create a new product. Select constraint-based configuration as the configuration technology.
  D. Create a new product master. Select predefined variant as the configuration technology.
  D. Create a new product master. Select predefined variant as the configuration technology.