Juniper JNCIP-SEC JN0-635 Questions & Answers

• Question 81:

  Click the Exhibit button.

  

  Referring to the exhibit, which statement is true?

  A. ARP security is securing data across the control interface

  B. IPsec is securing data across the control interface

  C. SSH is securing data across the control interface

  D. MACsec is securing data across the control interface

  Correct Answer: D

  Reference: https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/ show-chassis-cluster-interfaces.html

• Question 82:

  You have configured three logical tunnel interfaces in a tenant system on an SRX1500 device. When committing the configuration, the commit fails.

  In this scenario, what would cause this problem?

  A. There is no GRE tunnel between the tenant system and master system allowing SSH traffic

  B. There is no VPLS switch on the tenant system containing a peer It-0/0/0 interface

  C. The SRX1500 device does not support more than two logical interfaces per tenant system

  D. The SRX1500 device requires a tunnel PIC to allow for logical tunnel interfaces

  Correct Answer: B

  Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/logical-systemsoverview.html

• Question 83:

  Your organization has multiple Active Directory domains to control user access. You must ensure that security policies are passing traffic based upon the users' access rights.

  What would you use to assist your SRX Series devices to accomplish this task?

  A. JATP Appliance

  B. JIMS

  C. JSA

  D. Junos Space

  Correct Answer: B

  Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-user-authintergrated-user-firewall-overview.html

• Question 84:

  You are asked to set up notifications if one of your collector traffic feeds drops below 100 kbps.

  Which two configuration parameters must be set to accomplish this task? (Choose two.)

  A. Set a traffic SNMP trap on the JATP appliance

  B. Set a logging notification on the JATP appliance

  C. Set a general triggered notification on the JATP appliance

  D. Set a traffic system alert on the JATP appliance

  Correct Answer: BD

• Question 85:

  You have configured static NAT for a webserver in your DMZ. Both internal and external users can reach the webserver using the webserver's IP address. However, only internal users can reach the webserver using the webserver's DNS name. When external users attempt to reach the webserver using the webserver's DNS name, an error message is received.

  Which action would solve this problem?

  A. Disable Web filtering

  B. Use DNS doctoring

  C. Modify the security policy

  D. Use destination NAT instead of static NAT

  Correct Answer: B

  Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-dns-algs.html

• Question 86:

  Which interface family is required for Layer 2 transparent mode on SRX Series devices?

  A. LLDP

  B. Ethernet switching

  C. inet

  D. VPLS

  Correct Answer: B

• Question 87:

  Click the Exhibit button.

  

  While configuring the SRX345, you review the MACsec connection between devices and note that it is not working.

  Referring to the exhibit, which action would you use to identify problem?

  A. Verify that the formatting settings are correct between the devices and that the software supports the version of MACsec in use

  B. Verify that the connectivity association key and the connectivity association key name match on both devices

  C. Verify that the transmission path is not replicating packets or correcting frame check sequence error packets

  D. Verify that the interface between the two devices is up and not experiencing errors

  Correct Answer: B

  Reference: https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/ show-security-mka-statistics.html

• Question 88:

  Click the Exhibit button.

  

  You have recently committed the IPS policy shown in the exhibit. When evaluating the expected behavior,

  you notice that you have a session that matches all the rules in your IPS policy.

  In this scenario, which action would be taken?

  A. drop packet

  B. no-action

  C. close-client-and-server

  D. ignore-connection

  Correct Answer: B

  Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-idp-policy-rulesand-rulebases.html