Juniper JN0-103 Online Practice Questions and Exam Preparation

Juniper JN0-103 Online Questions & Answers

• Question 191:

  Which two commands will provide the current configuration of the MX1-PE1 BGP group on your router? (Choose two.)

  A. user@router# show groups | display set | match MX1-PE1
  B. user@router> show configuration | display set | match MX1-PE1
  C. user@router> show configuration | match set | match MX1-PE1
  D. user@router# show | display set | match MX1-PE1
  B. user@router> show configuration | display set | match MX1-PE1
  D. user@router# show | display set | match MX1-PE1

• Question 192:

  You configured the route filter shown in the exhibit.

  

  In this scenario, which IP addresses would term-One accept?

  A. IP addresses that are part of the 172.35.0.0/16 network only.
  B. IP addresses that are part of the 172.35.0.0/16 network and IP addresses that are in the 172.35.0.0/16 and 172.36.0.0/16 subnets.
  C. IP addresses that are in a subnet of 172.35.0.0/16 network, but not IP addresses that are part of the 172.35.0.0/16 network itself.
  D. IP addresses that are part of the 172.35.0.0/16 network and IP addresses that are in subnets of 172.35.0.0/16 network.
  A. IP addresses that are part of the 172.35.0.0/16 network only.

• Question 193:

  

  You notice traffic destined to 172.31.17.0/24 is traversing an OSPF path rather than a BGP path. Referring to the exhibit, what is causing this behavior?

  A. The 172.31.17.0/24 BGP route has a higher route preference.
  B. The 172.31.17.0/24 route does not have a valid BGP entry.
  C. The 172.31.17.0/24 BGP route is missing a valid default next hop.
  D. The 172.31.17.0/24 BGP route's outgoing interface is down.
  A. The 172.31.17.0/24 BGP route has a higher route preference.

• Question 194:

  What are the usable hosts on the 192.168.1.24/29 network?

  A. .24 through .48
  B. .24 through .32
  C. .25 through .30
  D. .35 through .31
  C. .25 through .30

• Question 195:

  Which two statements are correct about the request system zeroize local command? (Choose two.)

  A. The command removes all data files.
  B. The command preserves the management interface addresses.
  C. The command resets all key values.
  D. The command removes all user-created files from the system.
  C. The command resets all key values.
  D. The command removes all user-created files from the system.

• Question 196:

  Which two statements are true regarding routing tables? (Choose two.)

  A. The routing table is populated by the forwarding table.
  B. Devices running the Junos OS can accommodate multiple routing tables.
  C. Information learned from routing protocols is stored in the routing table.
  D. The primary routing table for IPv4 unicast routes is inet.4.
  B. Devices running the Junos OS can accommodate multiple routing tables.
  C. Information learned from routing protocols is stored in the routing table.

• Question 197:

  

  Referring to the exhibit, what information is provided about the route to 192.168.47.0/24? (Choose two.)

  A. There are two active routes to 192.168.47.0/24.
  B. There is a single active route to 192.168.47.0/24.
  C. There are two next hops available to 192.168.47.0/24.
  D. There is a single next hop available to 192.168.47.0/24.
  B. There is a single active route to 192.168.47.0/24.
  C. There are two next hops available to 192.168.47.0/24.

• Question 198:

  How many host addresses are available in the 172.27.0.0/28 network?

  A. 6
  B. 30
  C. 28
  D. 14
  D. 14

• Question 199:

  At which command prompt would you issue the set date command?

  A. [edit chassis]user@router#
  B. [edit]user@router#
  C. [edit system]user@router#
  D. user@router>
  D. user@router>

• Question 200:

  Which command would allow you to compare two files stored on your router?

  A. user@host> file show filename1 compare filename2
  B. user@host> file compare files filename1 filename2
  C. user@host> compare files filename1 filename 2
  D. user@host> compare filename1 filename2
  B. user@host> file compare files filename1 filename2