Juniper JN0-100 Online Practice Questions and Exam Preparation

Juniper JN0-100 Online Questions & Answers

• Question 71:

  Which command will save the current active configuration as the rescue configuration?

  A. # save | rescue
  B. # save rescue configuration
  C. > request system configuration rescue save
  D. > request rescue-configuration save current
  C. > request system configuration rescue save

• Question 72:

  Which statement accurately defines the role of a Qualified Next Hop?

  A. It is any alternative path for best effort traffic.
  B. It is the next hop of the active route to a directly attached device.
  C. It is the next hop for a route from a qualified protocol.
  D. It is an alternative next hop for a static route.
  D. It is an alternative next hop for a static route.

• Question 73:

  Which user authentication methods are available in JUNOS?

  A. MD5 and SHA
  B. RADIUS and TACACS only
  C. Local User Database
  D. Local user Database, RADIUS, and TACACS+
  D. Local user Database, RADIUS, and TACACS+

• Question 74:

  What represents the binary equivalence of96.6.231.148?

  A. 10101000 11001000 10101001 10101001
  B. 01010000 00010110 11010101 10100110
  C. 01100000 00000110 11100111 10010100
  D. 01100100 00100101 11100100 10010111
  C. 01100000 00000110 11100111 10010100

• Question 75:

  Click the Exhibit button. user@host> show route protocol static inet.0: 12 destinations, 12 routes (12 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both

  192.168.2.128/27 *[Static/5] 00:03:13 > to 172.20.106.10 via fe-0/0/5.106 192.168.2.192/26 *[Static/5] 00:03:13 > to 10.210.14.131 via ge-0/0/0.0 192.168.2.192/27 *[Static/5] 00:03:13 > to 172.18.1.1 via ge-0/0/1.0 192.168.2.224/28 *[Static/5] 00:01:06 > to 10.210.14.130 via ge-0/0/0.0

  Using the route table shown in the exhibit, what will be the next-hop IP address used for a destination IP address of 192.168.2.239? (Assume the only routes to this destination are static routes.)

  A. 10.210.14.130
  B. 172.18.1.1
  C. 10.210.14.131
  D. 172.20.106.10
  B. 172.18.1.1

• Question 76:

  Click the Exhibit button.

  term 1 { from protocol ospf;

  then {

  preference 110;

  accept;

  }

  }

  term 2 {

  from protocol static;

  then accept;

  }

  term 3 {

  from {

  protocol static;

  route-filter 172.10.0.0/16 orlonger;

  }

  then reject;

  }

  term 4 {

  from {

  protocol static;

  route-filter 172.10.16.0/24 exact;

  }

  then next policy;

  }

  Given the policy shown in the exhibit, what will happen to Static route 172.10.16.0/24?

  A. accept
  B. reject
  C. next-policy
  D. go to default policy
  A. accept

• Question 77:

  Which command is used to retrieve the serial numbers of a Juniper device?

  A. show version
  B. show chassis hardware
  C. show hardware detail
  D. view hardware database
  B. show chassis hardware

• Question 78:

  Which statement is correct about a Routing Policy term?

  A. A term must contain a "from" statement.
  B. A term acts like "if" and "then" statements.
  C. The most specific term has precedence.
  D. Terms can be written in any order to achieve the same behavior.
  B. A term acts like "if" and "then" statements.

• Question 79:

  Which three steps are considered part of the initial configuration? (Choose three.)

  A. SNMP
  B. hostname
  C. root password
  D. user password
  E. management access interface
  B. hostname
  C. root password
  E. management access interface

• Question 80:

  Which two commands are needed to create and apply an export policy that advertises static routes to OSPF neighbors? (Choose two.)

  A. edit policy-options policy-statement policy-name set term 1 from protocol static set term 1 then accept
  B. edit ospf policy set from protocol static set 1 then accept
  C. set protocols OSPF export policy-name
  D. set protocols OSPF policy policy-name
  A. edit policy-options policy-statement policy-name set term 1 from protocol static set term 1 then accept
  C. set protocols OSPF export policy-name