HP HPE6-A44 Online Practice Questions and Exam Preparation

HP HPE6-A44 Online Questions & Answers

• Question 111:

  An administrator at Campus A manages Aruba Mobility Controllers (MCs). The administrator defines a server group that includes a local ClearPass server and a remote Microsoft RADIUS server. The ClearPass server has the credentials for users at Campus A and the Microsoft RADIUS server has the credentials for users at Campus B. Users at Campus A successfully authenticate and connect to the Campus A wireless network. However, when users from Campus B visit Campus A they fail authentication.

  What can the administrator do to solve this problem?

  A. Enable FastConnect on the Campus A Mobility Controllers.
  B. Enable machine authentication on the Mobility Controllers.
  C. Enable EAP-TTLS with EAP Termination on the Mobility Controllers.
  D. Enable EAP termination on the ClearPass server.
  A. Enable FastConnect on the Campus A Mobility Controllers.

• Question 112:

  An administrator has a standalone controller that runs ArubaOS 8.x software and wants to upgrade it to a newer release. The upgrade will be performed from the front panel of the physical controller. The administrator places the new software

  in the root directory of a USB drive. On the controller's LCD panel, no image is found.

  What is the cause of this problem?

  A. The image must be placed in the /Upgrade subdirectory.
  B. The image must be placed in the /Images subdirectory.
  C. The image must be placed in the /ArubaImage subdirectory.
  D. The upgrade must be performed from the controller's WebUI.
  C. The image must be placed in the /ArubaImage subdirectory.

• Question 113:

  When they operate in a cluster, Aruba APs obtain AP Group configuration information form which device?

  A. Mobility Master
  B. AirWave
  C. ClearPass
  D. Mobility Controller
  D. Mobility Controller

• Question 114:

  An administrator moves an AP from Campus 1 to Campus 2. At the Campus 2, the moved AP does not connect to a controller and download an AP Group configuration. Which process should the administrator perform to reset the AP back to its initial default state?

  A. From apboot mode, execute purgeenv.
  B. From the AP's ArubaOS CLI, execute write erase all.
  C. From the controller's ArubaOS, execute write erase all.
  D. From apboot mode, execute factory_reset.
  A. From apboot mode, execute purgeenv.

• Question 115:

  An administrator supports a RAP to a branch office. Employees at the branch office connect to an employee SSID that allows for split tunneling of the employee traffic. The RAP initially connects to the corporate office controller, but later loses connectivity to it.

  Which operating mode should the administrator configure for a secondary SSID to be advertised during the loss of connectivity?

  A. Standard
  B. Persistent
  C. Always
  D. Backup
  B. Persistent

• Question 116:

  Which network components are tracked by Aruba Clarity? (Choose two.)

  A. Wireless associations
  B. DNS lookups
  C. AP and controller health
  D. WLAN health
  E. Client health
  A. Wireless associations
  E. Client health

• Question 117:

  An administrator creates new pre-and post-authentication roles for a new WLAN. For which profile should the administrator assign these new roles under the Managed Network section?

  A. Server Groups
  B. Virtual AP
  C. 802.1X
  D. AAA profile
  D. AAA profile

• Question 118:

  Which Aruba AP mode constantly scans the radio environment to gather IDS and RF information?

  A. Spectrum AP
  B. RAP
  C. Mesh Portal
  D. Air Monitor
  D. Air Monitor

• Question 119:

  An administrator implements a cluster of four Aruba Mobility Controllers (MCs) managed by a Mobility Master (MM). An AP Group is configured with two VAPs and deployed to an AP that will connect to the cluster. Each AP contains two radios.

  How many GRE tunnels will be built from the AP to the Active AP Anchor Controller (A-AAC)?

  A. 2
  B. 4
  C. 5
  D. 8
  A. 2

• Question 120:

  An administrator configures the MultiZone feature for a company network, where a mobility cluster is the primary zone and a standalone controller in the company's DMZ represents a secondary data zone. The administrator configures two AP Groups and respective VAPs for the zones on the Mobility Master (MM) in the primary zone. When the APs boot up and establish connections to both zones, the administrator notices that no data connections are established to the data zone.

  What must the administrator do to fix this problem?

  A. Configure the same AP Groups and VAPs on the standalone controller, and associate the MultiZone APs to both groups.
  B. Configure the same AP Group in the data zone as it is in the primary zone, and configure the VAPs in the data zone.
  C. Have the MultiZone APs initially boot from the standalone controller in the data zone.
  D. Create different AP groups and VAPs on the Mobility Master and standalone controllers, and associate the MultiZone APs to both groups.
  D. Create different AP groups and VAPs on the Mobility Master and standalone controllers, and associate the MultiZone APs to both groups.