HP HPE0-S60 Online Practice Questions and Exam Preparation

HP HPE0-S60 Online Questions & Answers

• Question 1:

  Which statement about login redistribution is true?

  A. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
  B. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
  C. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
  D. Login redistribution is used for login balancing when they are not distributed evenly over the FC links
  C. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules

• Question 2:

  Refer to the exhibit.

  

  Which statement about this logical interconnect group is true?

  A. The master modules are located in the interconnect bays 2 and 5
  B. For the given downlink speed, the maximum number of frames is reached
  C. Both master modules are located in the same HPE Synergy frame
  D. To use interconnect bay set 3, all compute nodes must be half-height
  C. Both master modules are located in the same HPE Synergy frame

• Question 3:

  Your customer has experience with utilization sampling for HPE Virtual Connect SE 100 Gb F32 Module for HPE Synergy. They have recently purchased HPE VC FC modules. What must you be aware of regarding utilization sampling for the new modules?

  A. Utilization sampling for HPE VC FC modules must be enabled manually using CLI.
  B. For HPE VC FC modules, utilization sampling is always enabled and cannot be disabled
  C. For HPE VC FC modules, utilization sampling can be enabled once appropriate license is applied
  D. Utilization sampling works the same way tor any type of HPE Synergy interconnect modules
  A. Utilization sampling for HPE VC FC modules must be enabled manually using CLI.

• Question 4:

  Your customer has me following HPE Synergy setup:

  - Three frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed formulating a single logical enclosure

  -Two HPE Virtual Connect SE 100Gb F32 Module for Synergy

  -Four HPE Synergy 50Gb interconnect Link Module

  -

  Six HPE Synergy Virtual Connect SE 32Gb FC Modules

  The customer needs to add a frame.

  Which statement about the expansion of this setup is true?

  A. The additional frame must have HPE Virtual Connect FC modules installed
  B. The customer can grow the existing logical enclosure up to 5 frames
  C. The customer has to create a new logical enclosure for the additional frame
  D. The additional frame cannot have 12Gb SAS connection modules installed
  C. The customer has to create a new logical enclosure for the additional frame

• Question 5:

  Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex 280 They plan to manage new components using HPE OneView.

  What must be done to achieve this goal?

  A. The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
  B. The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
  C. The customer must add a second Rack Management Controller for HPE Superdome Flex 280
  D. The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy
  C. The customer must add a second Rack Management Controller for HPE Superdome Flex 280

• Question 6:

  Which statement about a new HPE SimpliVity deployment is true?

  A. New HPE SimpliVity deployments give customer flexible choice of hypervisor
  B. All new HPE SimpliVity models are based on AMD CPUs
  C. All new HPE SimpliVity models support deduplication and compression
  D. New HPE SimpliVity deployments are licensed per node not per physical socket
  C. All new HPE SimpliVity models support deduplication and compression

• Question 7:

  Your customer plans to deploy VMware ESXi 7 0 U2 and they are looking for a hardware platform mat wilt allow them to use up to 24 TB of physical memory. Which HPE compute system meets this customer's requirements?

  A. HPE ProLiant DL380 Gen 10 Plus
  B. HPE Synergy 480 Gen10 Plus
  C. HPE ProLiant DL560 Gen10
  D. HPE Superdome Flex 280
  A. HPE ProLiant DL380 Gen 10 Plus

• Question 8:

  Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis. Which components must be included in the proposal to meet the customer's needs?

  A. Rack Management Controller for nPar management
  B. HPE Superdome Flex Grid licenses enabling connectivity between chassis
  C. At least Tour HPE Persistent Memory DIMMs per nPar
  D. One base chassis and three expansion chassis with licenses
  D. One base chassis and three expansion chassis with licenses

• Question 9:

  Which statement about the HPE D3940 storage module is true?

  A. SATA drives requires redundant 10 adapters to be installed in this module
  B. Up to five modules can be installed in a single frame with Gen10 servers
  C. it is configured through CLl available from HPE Synergy console
  D. Only one type of drives (SATA, SAS, SSD) can be installed in each module
  C. it is configured through CLl available from HPE Synergy console

• Question 10:

  HOTSPOT

  Click the drop-down menu that will allow you to define the location of the master modules within the logical interconnect group.

  Hot Area: