HP HPE0-S52 Online Practice Questions and Exam Preparation

HP HPE0-S52 Online Questions & Answers

• Question 61:

  A customer has a Gen10 ProLiant server with SATA 6Gb 7.2k based drives in a Raid 5 configuration. They constantly receive internal complaints about slow performance. When they investigate the server, they are regularly discovering failed

  drives and write performance response times are near 20ms.

  Based on this information, what recommendation should you offer to help with the slow performance and failing drives.

  A. Replace HDD with SAS 12GB drives
  B. Replace the current controller with an E-class based model.
  C. Install MDL disk drives
  D. Migrate from Raid 5 to Raid 6.
  A. Replace HDD with SAS 12GB drives

• Question 62:

  A customer needs a tool that will allow them to mount virtual media to multiple HPE ProLiant DL systems at the same time. What should you recommend to this customer?

  A. HPE OneView
  B. iLO Federation
  C. HPE Onboard Administrator
  D. HPE Composer
  B. iLO Federation

• Question 63:

  Which benefit makes the HPE ProLiant Microserver Gen10 the ideal choice when the server is located in a small, open-plan or home office?

  A. supports low-power intel CPUs
  B. Bronze and Gold Intel CPUs support
  C. quad display ports capable of 4K display resolution
  D. noise level of the fully loaded server is less than 40 decibels
  D. noise level of the fully loaded server is less than 40 decibels

• Question 64:

  DRAG DROP

  Match each HPE ProLiant server to its correct definition.

  Select and Place:

  

  

• Question 65:

  During HPE BladeSystem implementation, you have to update firmware of the Virtual Connect modules installed in an enclosure. The enclosure is managed by HPE OneView. Which tool can be used to update firmware on VC modules?

  A. Insight Display
  B. Virtual Connect Manager
  C. Virtual Connect Support Utility
  D. OneView
  D. OneView

• Question 66:

  A customer's long term goal is to consolidate their standalone server-based LAN / FC SAN Infrastructure to a C7000-based solution. Which option should you include as part of the quote for the customer's long term goal?

  A. HPE 16GB Fibre Channel Switch Interconnect Module
  B. HPE Virtual Connect Flex-10 10GB Module
  C. HPE 6125XLG Ethernet Interconnect Module
  D. HPE Flex Fabric 20/40 F8 Virtual Connect Module
  D. HPE Flex Fabric 20/40 F8 Virtual Connect Module

• Question 67:

  Your customer is concerned about the possibility of experiencing a PDos attack on their server infrastructure. Which new HPE ProLiant Gen10 feature can you demonstrate?

  A. Commercial National Security Algorithms compliance
  B. OpenLDAP support
  C. Common Access Card (CAC) two-factor authentication support
  D. Silicon Root of Trust
  A. Commercial National Security Algorithms compliance

• Question 68:

  You are required to provide a complex hardware configuration which may also include custom SKUs. Which HPE tool should be used?

  A. One Config Advanced (OCA)
  B. IQuote Universal
  C. Storage Sizing tool
  D. Single Point of Configuration Knowledge (SPOCK)
  D. Single Point of Configuration Knowledge (SPOCK)

• Question 69:

  What is one advantage of using HPE Gen10 DDR4 Smart Memory over HPE Gen10 Standard DDR4 memory?

  A. Smart Memory has the same large capabilities but better cost savings.
  B. Smart Memory has up to 2666 MT/s speed, but standard does not.
  C. Smart Memory does not need a Smart Battery for backup, where Standard memory does.
  D. DDR4 Smart Memory has up to128 GB capacity.
  B. Smart Memory has up to 2666 MT/s speed, but standard does not.

• Question 70:

  A customer needs a RAID storage solution with the most storage space available that also provides fault tolerance against potential disk driver failures. The existing customer environment has a server with 8 SAS disk drives installed. Which RAID level should the customer use?

  A. RAID 0
  B. RAID 1
  C. RAID 5
  D. RAID 6
  D. RAID 6