HP HP2-T29 Online Practice Questions and Exam Preparation

HP HP2-T29 Online Questions & Answers

• Question 1:

  Which HP Smart Memory technology can provide speeds up to 2133 MT/s?

  A. DDR3
  B. DDR4
  C. DRAM
  D. HDIMM
  B. DDR4

• Question 2:

  Which tool is used to configure and manage the HP c7000 blade enclosure?

  A. Intelligent Management Center
  B. iLO4 Management Engine
  C. Centralized Management Console
  D. Onboard Administrator
  D. Onboard Administrator

• Question 3:

  Which functionalities are included in the Onboard Administrator?(Select two.)

  A. It allocates power based on the measured maximum power following insertion of a blade server.
  B. It permits the administrator to assign the device bay number following insertion of a blade server. It allows manual pairing of specific blade servers to specific power supplies.
  C. It surveys blade servers to verify and display the functionality of server NICs.
  D. It verifies that interconnect modules and mezzanine cards are compatible.
  A. It allocates power based on the measured maximum power following insertion of a blade server.
  C. It surveys blade servers to verify and display the functionality of server NICs.

• Question 4:

  In which device bay can a D2220sb storage blade be installed when partnered with and placed in the same zone as a half-height blade server?

  A. in a device bay directly below the partner blade
  B. in a device bay directly above the partner blade
  C. in the same device bay as the partner blade
  D. in a device bay adjacent to the partner blade
  D. in a device bay adjacent to the partner blade

• Question 5:

  Which HP Blade system interconnect module supports FCoE?

  A. MDS 9124e Fabric switch
  B. HP 4XFDR Infiniband switch
  C. Catalyst 3020 Blade switch
  D. Virtual Connect FlexFabric-20/40 F8
  B. HP 4XFDR Infiniband switch

• Question 6:

  Your customer does not install OS locally but is utilizing network boot over IPv6. Which server supports IPv6 PXEboot?

  A. ML350 Gen8
  B. DL980 G7
  C. DL580 Gen8
  D. DL380 Gen8
  C. DL580 Gen8

• Question 7:

  Which HP tool can be used by Intelligent Provisioning to update drivers and firmware?

  A. HP Smart Storage Administrator
  B. HP Smart Update Manager
  C. HP Insight Remote Support
  D. HP ROM-Based Setup Utility
  D. HP ROM-Based Setup Utility

• Question 8:

  HP Support has requested information to verify that memory DIMMs are authenticated as genuine HP DIMMs in a ProLiant Gen9 Server. What should you provide to HP?

  A. HP ADU report
  B. HP insight Diagnostics report
  C. HP Active health system report
  D. HP ILO event log
  B. HP insight Diagnostics report

• Question 9:

  Your customer wants to tune the performance of Moonshot server clusters in their data center. Which is the optimal tool for this task?

  A. HP Insight Cluster Management Utility (CMU)
  B. HP Cluster Object Manager (COM)
  C. HP OneView
  D. HP ServiceGuard Manager
  A. HP Insight Cluster Management Utility (CMU)

• Question 10:

  Which HP system management tool is activated and configured through HP ROM-based Setup Utility?

  A. HP Intelligent Provisioning
  B. HP Onboard Administrator
  C. Automatic System Recovery
  D. HP OneView
  A. HP Intelligent Provisioning