HP HP0-S41 Online Practice Questions and Exam Preparation

HP HP0-S41 Online Questions & Answers

• Question 1:

  Which tool or utility can be used to configure iLO settings?

  A. Option ROM for Configuration of Arrays
  B. Smart Update Manager
  C. SystemInsightManager
  D. Intelligent Provisioning
  B. Smart Update Manager

• Question 2:

  You need to update the system ROM on all server blades in a single enclosure. Which iLO feature can you use to complete this task?

  A. Enclosure Firmware Management
  B. iLO R15 Repository
  C. Embedded Remote Support
  D. iLOFederation
  D. iLOFederation

• Question 3:

  Which tool can be used to run Insight Diagnostics offline?

  A. ROM Based Setup Utility (RBSU)
  B. Intelligent Provisioning
  C. Post Boot Menu (F12)
  D. Option ROM Configuration for Arrays (ORCA)
  B. Intelligent Provisioning

• Question 4:

  What is required for Windows 2012 R2 to boot a GPT-enabled partition greater than 2. 2 TB?

  A. Both UEFI and Legacy BI0S enabled on the system
  B. Legacy BI0S enabled on the system
  C. UEFI enabled on the system
  D. NVMe-enabled SSD hard drives
  A. Both UEFI and Legacy BI0S enabled on the system

• Question 5:

  What is an advantage of HP APM for scale-out compute in the Apollo 8000?

  A. More compute performance is realized.
  B. Fewer components and cables are required.
  C. Less potential capacity is needed.
  D. Measurement of interconnect throughput is more accurate.
  B. Fewer components and cables are required.

• Question 6:

  Which HP chassis component will be updated automatically if a firmware baseline is not specified in HP OneView?

  A. HP Virtual Connect
  B. HP server blade System ROM
  C. HP Onboard Administrator
  D. HP Power Control Module
  C. HP Onboard Administrator

• Question 7:

  A customer needs to add a GPU card to an HP Blade server. What does the customer need to do in order to add the GPU card?

  A. Enable the PCI pass-thru on the Blade server.
  B. Install a PCI riser card in Mezzanine Slot 3 within the Blade server.
  C. Install a PCI Expansion blade in the slot adjacent to the Blade server.
  D. Enable the PCI pass-thru on the Onboard Administrator.
  A. Enable the PCI pass-thru on the Blade server.

• Question 8:

  Which memory DIMM technology combines DRAM memory with flash memory to allow data to he retained in the event power loss?

  A. RDIMM
  B. NVDIMM
  C. LRDIMM
  D. UDIMM
  C. LRDIMM

• Question 9:

  After installing DIMMs in all of the memory slots on a DL380p Gen8, only half of the memory can be seen. What is a probable cause of this issue?

  A. Hyper-threading is not enabled in the RBSU.
  B. Half of the DIMMs are a slower speed than the other half.
  C. Onlyone processor is installed.
  D. Half of the DIMMs are 135 volts, and the rest are 1.50 volts.
  B. Half of the DIMMs are a slower speed than the other half.

• Question 10:

  Which components must be updated to required versions in order for HP OneViewto manage blade enclosures?

  A. Blade iLOs, Onboard Administrator. Virtual Connect
  B. VirtualConnects. SASSwitches, SmartArray P244br
  C. Onboard Administrator. Blade iLOs, Server System ROM
  D. SmartArray P244br. Server System ROM. Blade iLOs
  A. Blade iLOs, Onboard Administrator. Virtual Connect