HP HP0-J65 Online Practice Questions and Exam Preparation

HP HP0-J65 Online Questions & Answers

• Question 211:

  Which SAN component integrates the quality and features of HP SAN hardware devices to simplify the storage network complexity?

  A. high speed cabling
  B. open standard protocols
  C. industry standard host bus adapters
  D. SAN management software
  D. SAN management software

• Question 212:

  Your customer's IT staff is highly experienced in designing, deploying and maintaining an HP SAN infrastructure. They would like 24 x 7 hardware and software support. Which HP premium hardware and software support package will you recommend?

  A. Critical
  B. Support Plus 24
  C. Proactive 24
  D. Support Plus
  B. Support Plus 24

• Question 213:

  You just installed a new Brocade 8Gb/s SAN for a customer. The customer uncovered some legacy 1Gb/s Brocade SAN components that cannot be upgraded, but need t integrate with the new 8Gb/s infrastructure. Which statement are true about compatibility in this situation?

  A. The two are compatible if a small 4Gb/s edge switch is used to enable the legacy device to connect
  B. The two are compatible if the HBA in the legacy host are upgraded to 8Gb/s
  C. The two are incompatible and cannot be mixed
  D. The two are compatible with the use of 4Gb/s SFPs
  D. The two are compatible with the use of 4Gb/s SFPs

• Question 214:

  The HP SAN design philosophy meets a range of storage system requirement. What does it provides? (Select two)

  A. incremental scaling
  B. a comprehensive list of compatible products
  C. a migration methodology
  D. a way to implement HP technology
  E. greater flexibility
  A. incremental scaling
  E. greater flexibility

• Question 215:

  You are designing a new SAN fabric for a customer environment. The customer want the design to provide easy of scalability, multiple resiliency, and support for a mix of local and distributed access. Which Fibre Channel topology should you recommend?

  A. Meshed
  B. Core-edge
  C. Cascaded
  D. Ring
  A. Meshed

• Question 216:

  Three LUNs, sda, sdb and sdc, are connected to a Linux server. You shutdown the server and physically remove sdb. What happens after the server reboots?

  A. The LUNs sda and sdc are accessible, LUN sdb is renamed into sdvb simulating a virtual device.
  B. The LUNs sda and sdc are accessible, LUN sdb is not listed in the device scan.
  C. The LUN sda is accessible, LUN sdc is now sdb and accessible using this name.
  D. The LUNs sda and sdc are accessible, LUN sdb is listed as offline in the device scan.
  C. The LUN sda is accessible, LUN sdc is now sdb and accessible using this name.

• Question 217:

  Which protocol is used to back up and restore a B-series switch configuration?

  A. HTTP
  B. ICMP
  C. FTP
  D. TFTP
  C. FTP

• Question 218:

  Which method should you use to quickly and easily document a new customer SAN configuration?

  A. Follow all cabling from port to port, write down source and target of the cables, label the cables, and record the labels.
  B. Collect the customer's configuration data using SANVisibility, upload the data and verify the report as soon as you get the documents.
  C. Install HP SIM and HP Storage Essentials SRM in 60-day trial mode on a new Windows Central Management Server and collect the site information to evaluate the result with Report Designer
  D. UseFinisar Fibre Channel Sniffer to determine source, destination, quality and performance of the Fibre Channel configuration.
  B. Collect the customer's configuration data using SANVisibility, upload the data and verify the report as soon as you get the documents.

• Question 219:

  What is the maximum distance per cable segment using 9/125 micron single-mode cable and long wavelength 2 Gb SFPs?

  A. 35 km
  B. 10 km
  C. 1 km
  D. 100 km
  E. 5 km
  B. 10 km

• Question 220:

  What are backup zones created to do? (Choose three.)

  A. support two tape drives
  B. separate tape libraries by OS platforms
  C. restrict the number of servers
  D. isolate LVD and HVD tape libraries
  E. limit access to the tape libraries
  B. separate tape libraries by OS platforms
  C. restrict the number of servers
  E. limit access to the tape libraries