Hitachi HCE-3210 Online Practice Questions and Exam Preparation

Hitachi HCE-3210 Online Questions & Answers

• Question 51:

  Your customer would like to implement a two-node Hitachi NAS Platform 4000 cluster using a HUS 110 storage system. The HUS is shared with other Open Systems platforms. Ports OB and 1B are the only ports available on the HUS. Hport 1 and 3 are the only ports available on the Hitachi NAS Platform nodes. Which two wiring and zoning configurations should be used? (Choose two.)

  A. Hport 1 of both nodes, and HUS port OB must be connected to switch 1 and could be in the same zone.
  B. Hport 1 and 3 of node 1, and HUS port OB must be connected to switch 1 and could be in the same zone.
  C. Hport 3 of both nodes,and HUS port 1B must be connected to switch 2 and could be in the same zone.
  D. Hport 1 and 3 of node 2, and HUS port 1B must be connected to switch 2 and could be in the same zone.
  A. Hport 1 of both nodes, and HUS port OB must be connected to switch 1 and could be in the same zone.
  C. Hport 3 of both nodes,and HUS port 1B must be connected to switch 2 and could be in the same zone.

• Question 52:

  A customer has purchased a Hitachi NAS Platform solution and wants to consolidate databases from 25 SQL servers and 15 Oracle servers onto the Hitachi NAS Platform. I/O size is expected to be relatively large. Which two should be used to achieve optimal performance? (Choose two.)

  A. 4 KB block size file system
  B. 32 KB block size file system
  C. WORM file system
  D. jumbo frames
  B. 32 KB block size file system
  D. jumbo frames

• Question 53:

  You are designing a solution for a Hitachi NAS Platform 4000 that will be used in a VMware vSphere environment. The customer would like to use tiering to improve performance. What are three design best practices for Hitachi Tiered File Systems in this environment? (Choose three.)

  A. When using SAS drives in tier 0, RAID 1+0 should be used.
  B. RAID6 should be configured for HDT.
  C. SSD should be used in tier 0 to achieve the largest performance improvements.
  D. Use the "fs-analyze-data-usage" command to simulate Tiered File System metadata requirements.
  E. Use five percent of the total file system size to estimate the metadata requirements.
  A. When using SAS drives in tier 0, RAID 1+0 should be used.
  C. SSD should be used in tier 0 to achieve the largest performance improvements.
  E. Use five percent of the total file system size to estimate the metadata requirements.

• Question 54:

  What should you consider about concurrent CIFS connections when designing a Hitachi NAS Platform two-node cluster solution?

  A. The concurrent CIFS connection limits per node are added together and are supported on both nodes.
  B. The concurrent CIFS connection limits on each node are divided in half when clustered.
  C. The limits are per node and the surviving node can only support 1/2 the number that the cluster supports.
  D. The surviving node in a cluster can support twice the single node's connection limit.
  C. The limits are per node and the surviving node can only support 1/2 the number that the cluster supports.

• Question 55:

  You are designing Hitachi NAS File Clone solution for a customer with an existing Hitachi NAS platform. Which two are required? (Choose two.)

  A. NAS firmware version 8.x or later
  B. iSCSI volumes
  C. WFS-2 file system
  D. Hitachi NAS G2 hardware
  A. NAS firmware version 8.x or later
  C. WFS-2 file system

• Question 56:

  Your customer wants to issue administrative commands to a Hitachi NAS Platform 4000 over their data network using scripting. What must you do?

  A. Change the firewall setting in SMU to allow access to the admin EVS.
  B. Assign an IP address to the admin EVS on the data network aggregate.
  C. Run the scripted commands against any existing file services EVS.
  D. Add an additional IP address to the file services EVS used by the clients.
  B. Assign an IP address to the admin EVS on the data network aggregate.

• Question 57:

  Which three statements describe the Hitachi NAS Platform file system auditing capabilities? (Choose three.)

  A. CIFS clients can be audited.
  B. Auditing is enabled on a per file system basis.
  C. NFSv3 clients can be audited.
  D. Auditing events can be sent via email.
  E. NFS clients can be denied access to a file system when auditing is enabled
  A. CIFS clients can be audited.
  B. Auditing is enabled on a per file system basis.
  E. NFS clients can be denied access to a file system when auditing is enabled

• Question 58:

  What are two ways of controlling anti-virus scanning on Hitachi NAS Platform nodes? (Choose two.)

  A. Select the round robin algorithm on the multi-scan engine configuration screen
  B. Set up the inclusion list.
  C. Enable anti-virus at the share level.
  D. Modify the virus background checking policies.
  B. Set up the inclusion list.
  C. Enable anti-virus at the share level.

• Question 59:

  You are designing a solution for a customer who wants to optimize network performance for their iSCSI environment of 20 Microsoft SQL servers on their Hitachi NAS Platform. Which three actions do you suggest to the customer? (Choose three.)

  A. Create a private VLAN between the Microsoft SQL server and the Hitachi NAS Platform.
  B. Create a LAG on the Hitachi NAS platform using all available interfaces.
  C. Use the latest open source iSCSI initiator in the Microsoft SQL server.
  D. Use the spanning tree protocol.
  E. Add multiple network interfaces to their Microsoft SQL server and use MPIO.
  A. Create a private VLAN between the Microsoft SQL server and the Hitachi NAS Platform.
  B. Create a LAG on the Hitachi NAS platform using all available interfaces.
  E. Add multiple network interfaces to their Microsoft SQL server and use MPIO.

• Question 60:

  As part of a Hitachi NAS Platform design process a customer informs you of two business requirements. First, they need to have network redundancy by using two separate switches. Second, they require the ability to access multiple subnets on the same interface. Which two protocols will they need to implement on the NAS? (Choose two.)

  A. VLAN Tagging (802.1Q)
  B. Router Information Protocol (RIP)
  C. Hot Standby Router Protocol (HSRP)
  D. Link Aggregation Control Protocol (LACP 802.3ad)
  A. VLAN Tagging (802.1Q)
  D. Link Aggregation Control Protocol (LACP 802.3ad)