Huawei HC-611 Online Practice Questions and Exam Preparation

Huawei HC-611 Online Questions & Answers

• Question 251:

  When using the method of multiple paths between the application server connected to the storage system, in the absence of multipath software support, the way that multiple paths which are connected will cause a problem? (Choose three)

  A. Danger to the data
  B. Produce the illusion of multiple redundant disks
  C. The operating system does not know when to use the redundant paths
  D. Reduced bandwidth
  A. Danger to the data
  B. Produce the illusion of multiple redundant disks
  C. The operating system does not know when to use the redundant paths

• Question 252:

  When installed on Windows 2003 UltraPath for Windows, in Device Manager:

  A. Successful installation displays "UltraPath Device Specific Module"
  B. If the installation is successful, displays "Multi-Path Support"
  C. Successful installation displays "Multi-Path Device Specific Module"
  D. If the installation is successful, displays "UltraPath Support"
  B. If the installation is successful, displays "Multi-Path Support"

• Question 253:

  S5000T Series disk array product support host port types include: (Choose three)

  A. 8Gb FC
  B. 10Gb iSCSI
  C. SCSI
  D. 1Gb iSCSI
  A. 8Gb FC
  B. 10Gb iSCSI
  D. 1Gb iSCSI

• Question 254:

  The following hardware instead of using the FC protocol to communicate is:

  A. iSCSI card
  B. FC drives
  C. FC switch
  D. FC HBA card
  A. iSCSI card

• Question 255:

  About the configuration of the array starters, the following statement is wrong:

  A. If iscsi connection, you need to know in advance the host initiator node name
  B. If the FC connection, you need to know in advance wwn host FCHBA card number
  C. Must ensure that the normal connection between the host and the starter before adding starter
  D. None of the above comments
  D. None of the above comments

• Question 256:

  Huawei SAN storage products have replaceable parts: (Choose three)

  A. Hard disk
  B. Controller
  C. Power supply fan
  D. CPU
  A. Hard disk
  B. Controller
  C. Power supply fan

• Question 257:

  S2600 and S5000 product replacement controller, incorrect behavior are:

  A. Before removing the controller,the controller should be connected all the cables pulled
  B. Before unplugging the controller should be in the ISM interface to pull out of the business transfer controller to another controller
  C. In order to speed up the replacement controller speed,then pull out the controller,the first on the ground next to the new controller such as the insertion of the following,and then clean up the site
  D. When the controller is inserted,you need some start-up time,you must wait for it to fully start,and has been recognized on the ISM is not complete after running
  C. In order to speed up the replacement controller speed,then pull out the controller,the first on the ground next to the new controller such as the insertion of the following,and then clean up the site

• Question 258:

  Belong to IP-SAN hardware components of the device are: (Choose three)

  A. iSCSI storage devices
  B. FC HBA card
  C. Ethernet Switch
  D. iSCSI HBA card
  A. iSCSI storage devices
  C. Ethernet Switch
  D. iSCSI HBA card

• Question 259:

  Linux mount the file system under which command?

  A. umount
  B. mount
  C. mout
  D. unmount
  B. mount

• Question 260:

  S5600T S2600 products are not safe dish using similar techniques for data protection.

  A. True
  B. False
  A. True