Huawei HC-224 Online Practice Questions and Exam Preparation

Huawei HC-224 Online Questions & Answers

• Question 161:

  To enable an Eudemon in routing mode to work like a router, you need to assign IP addresses to interfaces and enable dynamic or static routing protocols on the Eudemon.

  A. True
  B. False
  A. True

• Question 162:

  Before establishing a network, we must create VLANs. The users that do not need to communicate with each other should be added to the same VLAN for isolation.

  A. True
  B. False
  B. False

• Question 163:

  The default-route originate command in the RIP protocol is used to advertise a default RIP route to peers. By using this command, which of the following attributes can be set for the default route?

  A. Tag
  B. Cost
  C. Interface
  D. Nexthop
  B. Cost

• Question 164:

  Assume that the VRID of a VRRP virtual router is 100 and the virtual IP address of the virtual router is 192.168.1.1, which of the following addresses is the virtual MAC address of the virtual router?

  A. 00-00-5E-00-01-64
  B. 00-00-5E-00-01-01
  C. 01-00-5E-00-01-64
  D. 01-00-5E-00-01-01
  A. 00-00-5E-00-01-64

• Question 165:

  Which of the following statements about the zone priorities of the Eudemon are true? (Select 3 Answers)

  A. The priority of the Local zone is 100.
  B. The priority of the Trust zone is 80.
  C. The priority of the Untrust zone is 5.
  D. The priority of the DMZ is 50.
  A. The priority of the Local zone is 100.
  C. The priority of the Untrust zone is 5.
  D. The priority of the DMZ is 50.

• Question 166:

  VLANs isolate broadcast domains, eliminates broadcast storms, and enhances information security.

  A. True
  B. False
  A. True

• Question 167:

  Which statements about BGP well-known mandatory attributes are true? (Select 3 Answers)

  A. Well-known mandatory attributes must be identified by all BGP routers.
  B. Well-known mandatory attributes must be transmitted between BGP peers.
  C. Well-known mandatory attributes are optional in an Update packet, and can be carried in an Update packet as needed.
  D. Well-known mandatory attributes must be carried in an Update packet.
  A. Well-known mandatory attributes must be identified by all BGP routers.
  B. Well-known mandatory attributes must be transmitted between BGP peers.
  D. Well-known mandatory attributes must be carried in an Update packet.

• Question 168:

  The firewall can be working in routing mode, transparent mode, or composite mode. The default mode is the composite mode.

  A. True
  B. False
  B. False

• Question 169:

  Which of the following statements are correct regarding how OSPF detects old and duplicate LSAs? (Select 3 Answers)

  A. The smaller the sequence number,the more recent the LSA.
  B. The smaller the LS age, the more recent the LSA.
  C. When router generates a new LSA at the first time, it will use 0x80000001 as the sequence number.
  D. An LSA can be flushed from routing domain by setting its LSA age to Maxage.
  B. The smaller the LS age, the more recent the LSA.
  C. When router generates a new LSA at the first time, it will use 0x80000001 as the sequence number.
  D. An LSA can be flushed from routing domain by setting its LSA age to Maxage.

• Question 170:

  Which of the following solutions effectively defend against ARP attacks? (Select 3 Answers)

  A. Binding a MAC address and an IP address
  B. Enabling the ARP attack protection function on a Huawei switching device
  C. Adding network segments to different VLANs on a switch
  D. Enabling IP packet filtering
  A. Binding a MAC address and an IP address
  B. Enabling the ARP attack protection function on a Huawei switching device
  C. Adding network segments to different VLANs on a switch