Huawei H35-211 Online Practice Questions and Exam Preparation

Huawei H35-211 Online Questions & Answers

• Question 251:

  (single) What message in the PPPOE protocol is used to terminate a session?

  A. PADI
  B. PADO
  C. PADS
  D. PADT
  D. PADT

• Question 252:

  (single) If you only deploy multicast services in a private private network, which multicast address segment should be preferred when planning?

  A. 224.0.0.0/8
  B. 225.0.0.0/8
  C. 232.0.0.0/8
  D. 239.0.0.0/8
  D. 239.0.0.0/8

• Question 253:

  (Radio) When using the siP protocol, you need to use a local number graph for matching, if you use the default matching mode to match a 7-digit number beginning with 7727, then the following options are available? The figure is

  A. Local-bitmap add huawei normal 7727xxx/7726.
  B. Local-digi tmap add huawei normal 772. /7727xxx
  C. Local-di gi tmap add huawei normal 7727
  D. Local-digitmap add huawei normal 7727xxx/7727
  D. Local-digitmap add huawei normal 7727xxx/7727

• Question 254:

  (Radio) A power access service deploys GPON Type C dual attribution protection, and the protection group is fixed with the upstream Ethernet port status on the OLT, and when the Ethernet port status associated with the protection group on the OLT becomes down, the following description is incorrect.

  A. The state of the onU side work port changes to standby
  B. OLT laughs at onu uplink state changes
  C. After the inversion, the service on the ONU is sent to the OLT through the protect port, that is, the service packet is transmitted on the protect example planting road
  D. The ONU detects link failures and triggers protection reversals
  D. The ONU detects link failures and triggers protection reversals

• Question 255:

  (Single choice) When planning qos, it is necessary to plan reasonably according to the business, and adopt the () scheduling mode for high-priority businesses.

  A. WHY
  B. RR
  C. DRR
  D. WRR
  A. WHY

• Question 256:

  (single) When locating an XDSL fault, which of the following is not the reason why the user of the entire frame cannot access the Internet?

  A. The main control board of the device is faulty.
  B. Cyber attack
  C. Power supply problem
  D. Some XDSL boards are faulty.
  D. Some XDSL boards are faulty.

• Question 257:

  (Radio) The following is not the QOS service model, is

  A. Diffserv
  B. Intserv
  C. FIFO service
  D. Best Effort
  A. Diffserv

• Question 258:

  (Multi-select) Use 0TDR to locate the abnormally attenuated location in the optical path, and after the OTDR is connected to the detected line, which of the following parameters can be set.

  A. Set the measurement range
  B. Set the wavelength
  C. Set the mode
  D. Sets the pulse width
  A. Set the measurement range
  B. Set the wavelength
  C. Set the mode
  D. Sets the pulse width

• Question 259:

  The (single) SIP message consists of three parts. Which of the following does not belong to the SIP message content?

  A. First line
  B. Message header
  C. Message type
  D. Text
  C. Message type

• Question 260:

  (single) MA5600T/MA5680T When performing FTTH service and data planning, which of the following parameters cannot be duplicated under the same PON port?

  A. TCONT-ID
  B. CVLAN ID
  C. SVLAN ID
  D. ONT ID
  D. ONT ID