Huawei H35-211 Online Practice Questions and Exam Preparation

Huawei H35-211 Online Questions & Answers

• Question 201:

  (single) Which field of the PPP frame is used to identify whether the carried message is IP or IPX?

  A. Control domain
  B. Flag field
  C. Protocol domain
  D. Frame check field
  C. Protocol domain

• Question 202:

  (single) Which of the following isql login database commands is correct?

  A. isql -Usa_password -Ssa -PN2000DBServer
  B. isql -Usa -Ssa_password -SN2000DBServer
  C. isql -Usa -PN2000DBServer -Ssa_password
  D. isql -Usa -Psa_password -SN2000DBServer
  D. isql -Usa -Psa_password -SN2000DBServer

• Question 203:

  (Multi-select) Network Management U2000 adds line templates to realize the mapping of user traffic flows to GEM PORTS, including mapping modes(Radio)

  A. MAC
  B. PORT
  C. vlan
  D. 802.IP
  B. PORT
  C. vlan
  D. 802.IP

• Question 204:

  (multiple) Users can access the network normally, but network connections are often interrupted. What are the possible causes of this failure?

  A. ONU dropped
  B. There is a problem with the line between the ONU and the user.
  C. There is a problem with the data link, resulting in packet loss.
  D. Modem failure
  A. ONU dropped
  B. There is a problem with the line between the ONU and the user.
  C. There is a problem with the data link, resulting in packet loss.
  D. Modem failure

• Question 205:

  (multiple) If the MA5680T fails to boot properly (non-hardware problems, the system keeps restarting), usually we can use the BIOS upgrade method to end. What kind of uploading method does the MA5680T load package file have when using the BIOS upgrade?

  A. ftp
  B. tftp
  C. Xmodem
  D. wftp
  A. ftp
  B. tftp
  C. Xmodem

• Question 206:

  (single) Is the following description correct?

  When negotiating the project acceptance test project with the customer, it is recommended to submit the product related product acceptance manual directly to the customer, and let the customer choose the test project.

  A. True
  B. False
  B. False

• Question 207:

  (single) The IMGP version on the MA5680T is configured as V2. What happens after the MA5680T receives the join message from the IMGP V3 forwarded by the ONT?

  A. Direct discard
  B. Normal forwarding
  C. Send a general group query message
  D. Send a specific group query message
  A. Direct discard

• Question 208:

  (single) The ADSL user under the UA5000 originally used the activation template as 2M, and then changed the activation template to 4M. The speed throw was maintained at the original level, and there was no obvious improvement. What are the reasons for this problem?

  A. There is congestion in the uplink port
  B. ADSL port has poor external line quality
  C. The depth of the interleaving depth of the active template is too deep
  D. The above are possible
  D. The above are possible

• Question 209:

  (single) In the Radius protocol, there are three responses to the message with CODE=1. Which of the possible response messages are in addition to the messages with CODE=3 and CODE=11?

  A. CODE=2 message
  B. CODE=4 message
  C. CODE=5 message
  D. CODE=10 message
  A. CODE=2 message

• Question 210:

  (single) Is the following description correct?

  The ADSL port can work in both interleaved and fast channel modes. The fast mode omits the process of interleaving and deinterleaving, so the delay after processing can be greatly reduced. In the case where the ADSL service has a high latency requirement, the interleaving mode can be used.

  A. True
  B. False
  B. False