Huawei H35-210 Online Practice Questions and Exam Preparation

Huawei H35-210 Online Questions & Answers

• Question 231:

  (single) The default tag conversion rule (that is, the tag-transform is set to default) of the MA5600T for the three different attributes of the VLAN (that is, common, QinQ, and stacking). Which of the following is incorrect?

  A. The default mode of all QinQ VLAN traffic flows is add
  B. common vlan service flow, for the service flow without tag, the default is add, for the service flow with tag defaults to translate
  C. stacking vlan service flow, the default is add-double for tags without tag; the default for translate-and-add for tagged traffic
  D. None of the above
  D. None of the above

• Question 232:

  Which of the following statements about IP routes are correct?

  A. In a LAN, a route consists of the following parts: IP address and MAC address.
  B. IP routes are used to guide IP packet forwarding.
  C. Routing is a concept at the second layer of the OSI model.
  D. Any route must contain the following information: source address, destination address, and next hop.
  B. IP routes are used to guide IP packet forwarding.

• Question 233:

  The traffic-table on the OLT can be used to set the traffic rate limit parameters and priority policies.

  A. TRUE
  B. FALSE
  A. TRUE

• Question 234:

  (single) Is the following description correct? The MxU auto-upgrade policy automatically compares the current version of the device with the target version of the policy when the device is powered on. If the device is inconsistent, the device software version is automatically upgraded to the target version.

  A. True
  B. False
  A. True

• Question 235:

  The routing table of a router contains the following two entries: Destination/Mask | Protocol | Pre | Cost | Nexthop | Interface 9.0.0.0/8 | OSPF | 10 | 50 | 1.1.1.1 | Serial0 9.1.0.0/16 | RIP | 100 | 5 | 2. 2. 2. 2 | Ethernet0 If the router needs to forward packets with the destination address of 9.1.4. 5, which statement is correct?

  A. The router selects the second route, because the metric of RIP is smaller.
  B. The router selects the second route, because the outbound interface is Ethernet0, which is faster.
  C. The router selects the first route, because the priority of OSPF is higher.
  D. The router selects the second route, because this route matches the destination address 9.1.4. 5 more accurately.
  D. The router selects the second route, because this route matches the destination address 9.1.4. 5 more accurately.

• Question 236:

  What are the characteristics of (multiple) ATM cells?

  A. ATM cell is a fixed length of 53 bytes
  B. Divided into letterhead and payload
  C. The header is 5 bytes.
  D. The payload is 48 bytes.
  A. ATM cell is a fixed length of 53 bytes
  B. Divided into letterhead and payload
  C. The header is 5 bytes.
  D. The payload is 48 bytes.

• Question 237:

  The customer needs to access the following information points: AP, PC, POTS, and CATV. Which of the following statements about data transmission of these information points by ONUs is correct?

  A. All types of data are encapsulated into Ethernet frames before PON-related encapsulation and transmission over one fiber.
  B. When an OLT is connected downstream to an ONU, one fiber and two wavelengths are used to carry CATV and other services respectively. All services except CATV are encapsulated into Ethernet frames before PON encapsulation.
  C. POTS voice services are TDM services and directly encapsulated in GEM frames.
  D. When an OLT is connected downstream to an ONU, one fiber and two wavelengths are used to carry CATV and other services respectively. For all services except CATV, if POTS is a TDM service, it is transparently transmitted.
  B. When an OLT is connected downstream to an ONU, one fiber and two wavelengths are used to carry CATV and other services respectively. All services except CATV are encapsulated into Ethernet frames before PON encapsulation.

• Question 238:

  (single) PON hanging two-stage splitter, level 1 is 1:2, level 2 splitter is 1:16, what is the total split ratio?

  A. 1:2
  B. 1:16
  C. 1:18
  D. 1:32
  D. 1:32

• Question 239:

  (Single) For multicast and IPTV, which of the following statements is incorrect?

  A. Multicast refers to the point-to-multipoint communication form in the network.
  B. The core of the multicast technology is to put the message copying work as close as possible to the receiver, and reduce the data traffic on the network.
  C. Through the introduction of controlled multicast, the management and control of multicast users are completed on the DSLAM device.
  D. IPTV is a way of video on demand
  D. IPTV is a way of video on demand

• Question 240:

  (single) Is the following description correct? The ADSL port can only allow further operations on the port after the port is unblocked.

  A. True
  B. False
  A. True