Huawei H31-311 Online Practice Questions and Exam Preparation

Huawei H31-311 Online Questions & Answers

• Question 151:

  Configuring an EPLAN service as a ring is not recommended. If the EPLAN service is configured as a ring, the STP protocol must be enabled on the network to prevent broadcast storms.

  A. TRUE B. FALSE
  A. TRUE B. FALSE

  ---

• Question 152:

  The SNCP switching speed can be improved if you classify the SNCP services that have the same source, sink, or route into groups.

  A. TRUE
  B. FALSE
  A. TRUE

  ---

• Question 153:

  When an optical fiber between node A and node B is broken, the FIU on node B detects the OTS_LOS alarm and inserts the OTS_BDI alarm to node A. The FIU on node A reports the OTS_BDI alarm. The line board on the downstream C node reports the OCh_SSF alarm.

  A. TRUE
  B. FALSE
  A. TRUE

  ---

• Question 154:

  For the OSN 3500, there is a slot mapping relationship between processing boards and interface boards. The processing board in slot 1 maps to the interface board in slot 19-20.

  A. TRUE
  B. FALSE
  B. FALSE

  ---

• Question 155:

  In the case of 1+1 linear MSP, which of the following switching modes do not require the enabling of the APS protection protocol? (Choose two)

  A. Single-ended revertive mode
  B. Single-ended non-revertive mode
  C. Dual-ended revertive mode
  D. Dual-ended non-revertive mode
  A. Single-ended revertive mode
  B. Single-ended non-revertive mode

  ---

• Question 156:

  Forced switching, fiber cut switching, manual switching, and exercise switching are in the descending order of priority.

  A. TRUE
  B. FALSE
  A. TRUE

  ---

• Question 157:

  In the frame structure of SDH signals, there are abundant overhead bytes used for operation, administration, and maintenance (OAM). The overhead bytes account for ( ) of all bits in the entire frame and greatly enhance the monitoring functions of the network.

  A. 1/10
  B. 1/20
  C. 1/30
  D. 1/40
  B. 1/20

  ---

• Question 158:

  Which of the following clock working modes support the ITU-T G.781 standard? (Choose three)

  A. Tracing (Tracking)
  B. Holdover
  C. Free-run (Self-curved running)
  D. Master/Slave
  A. Tracing (Tracking)
  B. Holdover
  C. Free-run (Self-curved running)

  ---

• Question 159:

  Which of the following is the default WTR time for MSP switching?

  A. 6 minutes
  B. 10 minutes
  C. 12 minutes
  D. 15 minutes
  B. 10 minutes

  ---

• Question 160:

  Which of the following is the maximum number of OSN 3500 subracks that can be installed in a 2.2-meter cabinet?

  A. 1
  B. 2
  C. 3
  D. 4
  B. 2

  ---